advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Articles Tagged with ''pulse''

IXYS Colorado introduces the IXRFD630 and IXRFD631 high power RF drivers

June 10, 2013

IXYS Corp., a leader in power semiconductors, mixed-signal and digital ICs for power conversion and motion control applications, announced the introduction of the IXRFD630 and IXRFD631 High Power RF MOSFET Drivers by its IXYS Colorado division. These drivers succeed the DEIC420 and DEIC421 and represent the next generation of RF driver for many RF applications including 13.56 and 27.12 Mhz RF power.


Read More

M/A-COM Tech announces 500 W GaN on SiC HEMT pulsed power transistor

May 3, 2013

M/A-COM Technology Solutions Inc. (M/A-COM), a leading supplier of high performance analog semiconductor solutions, introduced today a new market leading GaN on SiC HEMT Power Transistor for L-Band pulsed radar applications. 


Read More

High-Speed Pulsed Measurements for Radar

April 15, 2013

Pulse's mCOMET tunable LTE antenna provides 9 Bands in the world's smallest antenna space

February 25, 2013

Pulse Electronics Corp., a provider of electronic components, announces that it has developed a tunable, co-located long term evolution (LTE) antenna structure. The developed structure contains two LTE multiple input, multiple output (MIMO) antennas in the same end of one device to provide 9 frequency bands of functionality in a volume of just 3.20 cubic centimeters.


Read More

Pulse Electronics introduces ultra-thin NFC ferrite sheet antenna

February 19, 2013

Pulse Electronics Corp., a provider of electronic components, introduces a near field communications (NFC) antenna that is 40 percent thinner than similar NFC ferrite sheet antennas, while still complying with the EMVCo specification. The new ferrite sheet antenna enables mobile devices to read data from a distance of up to 40mm to enable them to communicate with other wireless devices for payments, access and control, credential storage and exchange, and content consumption.


Read More

Pulse Electronics introduces pin-in-paste RF MoCA filter modules

January 30, 2013

Pulse Electronics Corp., a leading provider of electronic components, introduces RF MoCA (Multimedia over Cable Alliance) filter modules that are pin-in-paste compatible. Pin-in-paste manufacturing uses a reflow instead of a wave soldering process to apply solder to the components, saving time, increasing throughput, and reducing costs. These filters are compliant with MoCA 1.1 and 2.0 requirements and are qualified with leading MoCA silicon vendors.


Read More

Pulse Electronics introduces higher gain LTE NMO and direct mount antennas

December 14, 2012

Pulse Electronics Corp., a leading provider of electronic components, introduces a new line of Shadow low profile transit (SLPT) NMO and direct mount antennas to support public safety, WLAN, smart grid/smart metering, 3G, and 4G applications including long term evolution (LTE). These high-performance, rugged, IP-67 rated antennas are provided in a slim, low profile radome of only 2.5" to 3" (63.5 to 76.2 mm) tall with a 1.5" (38.1 mm) diameter base and high gains of 4 to 5.6 dBi.


Read More

Upgraded pulse generator from Teseq offers improved accuracy

November 16, 2012

Teseq Inc., a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, now offers a pulse generator with improved accuracy. The FT 5531, an upgraded version of the FT 5530, supports classic and modern testing standards.


Read More

New Rohde & Schwarz R&S FSW signal analyzer pulse measurement option

June 20, 2012

The Rohde & Schwarz R&S FSW-K6 pulse measurement option for the R&S FSW series of high-performance signal and spectrum analyzers is an excellent choice for evaluating the performance of radar systems and all other applications that employ pulsed signals. When coupled with the MultiView capabilities of the R&S FSW series, multiple spectrum analyzer measurements can be run, viewed, and updated on a single screen giving the user a complete overview of system performance.


Read More

New development kit from Teseq helps build personalized pulse networks

April 27, 2012

Teseq Inc. now offers a development kit that allows automotive technicians and engineers to design their own pulse networks. By using the FLX 5510 in conjunction with Teseq’s NSG 5500, automotive EMC laboratories can easily design their own pulses as well as meet unique and custom specifications including pulse impedance, peak voltage, pulse width and pulse width under load. 


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement