advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Articles Tagged with ''loss''

TechPlus Microwave offers VHF Duplexer in 1U height package

TechPlus Microwave
No Comments

 TechPlus Microwave has developed one of the industry's lowest height/insertion loss duplexer covering the 135 to 172 MHz frequency range.  


Read More

Isola introduces ultra-low loss materials for 100 gigabit ethernet applications

Isola Group
No Comments

 Isola Group, a market leader in copper-clad laminates and dielectric prepreg materials used to fabricate advanced multilayer printed circuit boards (PCBs), introduces Tachyon-100 G laminates and prepregs, which enable line cards required to transmit 100 Gigabit Ethernet (100 GbE) at data rates in excess of 25 Gb/s per channel.  


Read More

Low loss, high isolation SPST switch covers DC to 20 GHz

Custom MMIC
No Comments

Custom MMIC, a developer of performance-driven monolithic microwave integrated circuits (MMICs), announces the introduction of the CMD204C3, a DC to 20 GHz single-pole, single-throw (SPST) MMIC switch. Also available in die form (CMD204), the CMD204C3 is the latest control device added by Custom MMIC to its growing library of standard products.

 

 


Read More

Custom MMIC's new DC to 20 GHz SP4T offers low insertion loss of 2.4 dB

Custom MMIC
No Comments

Custom MMIC, a developer of performance-driven monolithic microwave integrated circuits (MMICs), announces the introduction of the CMD203C4, a DC to 20 GHz single-pole, four-throw (SP4T), MMIC, switch housed in a leadless 4 x 4 mm ceramic package. The CMD203C4 is the latest control device added by Custom MMIC to its growing library of standard products.


Read More

Richardson RFPD introduces new wideband 10W SPDT switch from Wavelex

Richardson RFPD Inc.
No Comments

Richardson RFPD Inc. announces immediate availability and full design support capabilities for a new wideband, 10W single-pole, double-throw (SPDT) switch from Wavelex.


Read More

Fairview Microwave introduces low loss LL335i and LL142 cable assemblies

Fairview Microwave Inc.
No Comments

Fairview Microwave Inc. a preeminent supplier of on-demand microwave and RF products, introduces a new line of low loss test cables using LL335i and LL142 coax. Rated to 18 GHz, these new low loss cable assemblies are ideal for test environments where a rugged, phase stable cable assembly is required.


Read More

Richardson RFPD introduces new 0.7 to 2.7 GHz, 10 W hybrid coupler from Wavelex

Richardson RFPD Inc.
No Comments

Richardson RFPD Inc. announces immediate availability and full design support capabilities for a new 0.7 to 2.7 GHz, 10 W hybrid coupler from Wavelex.


Read More

Linear introduces flyback synchronous rectifier driver that provides 10 A output current

Linear Technology Corp.
No Comments

Linear Technology Corp. announces the LT8309, a flyback secondary-side synchronous rectifier driver that replaces the output diode with a MOSFET, allowing up to 10A output current without the use of a heat sink. The maximum output current of a flyback power supply has been limited by the power loss and heat generated from the output diode when no heat sink is used.


Read More

X3C25F1-03S Femto-Sized Coupler

Richardson RFPD Inc.
No Comments

X3C25F1-03SRichardson RFPD Inc. announces immediate availability and full design support capabilities for a new 3 dB hybrid coupler from Anaren. The low profile, high performance X3C25F1-03S, the latest Femto-sized coupler in the Xinger® III family of products from Anaren, has been miniaturized to a 3 mm x 5 mm footprint without sacrificing electrical performance.


Read More

Peregrine ships RF switch for TVs, set-top boxes and DVRs

Peregrine Semiconductor Corp.
No Comments

Peregrine Semiconductor Corp., founder of RF SOI (silicon on insulator) and pioneer of advanced RF solutions, introduces the UltraCMOS PE42721 75-Ohm RF switch for designers of digital TV (DTV) tuner modules, cable TV (CATV) signal switching and distribution systems, multi-tuner digital video recorders (DVRs) and set-top boxes. The switch is ideal for geographic markets – such as China, Japan, Korea and Latin America – where broadband-TV devices must accommodate multiple RF inputs for cable, satellite and terrestrial reception while avoiding interference between these signals.


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement