The MFBP-00137PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00137CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00135CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00134CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00133PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00129CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00128CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00127CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00126CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00118CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00110CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00109CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00108CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00089BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00084BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00083CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00082CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00072CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00070CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filter

The MFBP-00062CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00061CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00053BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBC-00004CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBA-00001BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBA-00001BH features a 14.17-17.83 GHz 1 dBc passband.

The MEQ6-40ABH passive MMIC equalizer is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems. 

The MEQ10-40ABH passive MMIC equalizer is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems.

The MFBP-00125PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00124PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00123PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00122PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00121PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00120PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00046BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00046BH features a 27.8-35.2 GHz 1 dBc passband.

The MFBP-00045BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00045BH features a 23.5-28.3 GHz 1 dBc passband.

The MFBP-00040BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00040BH features a 1.56-6.67 GHz 1 dBc passband.

The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth.

The MBALH-0R106CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 35 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. 

The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. 

The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. 

The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain.

The ABSD-10168PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 3 dB single ended to differential gain.

MXDB-1500WG is a double balanced mixer that features excellent conversion loss, great isolations, and spurious performance across the bandwidth.   

MXDB-1200WG is a double balanced mixer that features excellent conversion loss, great isolations, and spurious performance across the bandwidth.  

MXDB-1000WG is a double balanced mixer that features excellent conversion loss, great isolations, and spurious performance across the bandwidth.   

The MPD4-0R504CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package.

The MPD4-0R404CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package.

The MPD4-0422CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. 

The MPD4-0108CSP2 is a small footprint MMIC 4-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package.

The MPD-1260SCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package.

The MPD-1260FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package.

The MPD-0R402FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. 

The MPD-0422SCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. 

The MPD-0422FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. 

The MPD-0222FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. 

The MPD-0108SCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. 

The MPD-0108FCSP2 is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact CSP2 chip scale package. 

The MMIQA-1035SPSM is a versatile, robust, and broadband IQ mixer with an integrated broadband LO driver amplifier. 

The MM1A-0626SPSM is a versatile, robust, and broadband double balanced mixer with an integrated broadband LO driver amplifier.  

The MM1A-0330HPSM is a versatile, robust, and broadband double balanced mixer with an integrated broadband LO driver amplifier. 

The MFLP-00011PSM is a passive MMIC surface mount 7.1 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.

The MFLP-00010PSM is a passive MMIC surface mount 4.5 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. 

The MFHP-00014PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. 

The MFBP-00119CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00118CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00116CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00115CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00114CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00113CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00112CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00107PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00106PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00105PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00104PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00103CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00102CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00096PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00095PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00094PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00093PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00092PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00091PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00090PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00088PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00081CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00079CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00074PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00067CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00066CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00065CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00064CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBA-00004BH MMIC bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBA-00004BH features a 8.51-12.11 GHz 1 dBc passband, 2.3 dB center frequency insertion loss and 23 dB return loss. 

The MEQ0-70ACH passive MMIC equalizer die is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems.

The MDPX-00008PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 14 GHz and high frequency 16 to 28 GHz signals.

The MDPX-00007PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 12 GHz and high frequency 14 to 28 GHz signals. 

The MDPX-00006PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 10 GHz and high frequency 12 to 28 GHz signals. 

The MDPX-00005PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 8 GHz and high frequency 10 to 28 GHz signals.

The MDPX-00004PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 6 GHz and high frequency 8 to 28 GHz signals. 

The MDPX-00003PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 4 GHz and high frequency 6 to 28 GHz signals.

The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. 

The ATN20-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN15-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN10-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN09-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN08-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN07-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN06-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN06-0040BH is a GaAs MMIC in an in-line connectorized bullet housing package. The ATN06-0040BH provides a nominal 6dB attenuation over a DC-40GHz operating range.

The ATN05-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN04-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN03-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN02-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN01-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN00-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The AMM-9893M is a wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. 

The AMM-9893CH is a wideband mmWave amplifier enabling operation over a 45-95 GHz bandwidth. 

The AMM-9862PSM is a wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure. 

The AMM-9861PSM is a wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure. 

The AMM-9860PSM is a wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure. 

The AMM-9859PSM is a wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure. 

The AMM-9858PSM is a wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure. 

The AMM-9856PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L diode mixer up to 40 GHz or an H diode mixer up to 20 GHz. 

The AMM-9855PSM is a wideband low noise amplifier capable of providing 13 dB gain and +26 dBm OIP3 with a low 2.2 dB typical noise figure. 

The AMM-9854PSM is a wideband low noise amplifier capable of providing 14 dB gain and +25 dBm OIP3 with a low 2.5 dB typical noise figure. 

The AMM-9853PSM is a wideband low noise amplifier capable of providing 16 dB gain and +27 dBm OIP3 with a low 1.8 dB typical noise figure.

The AMM-9852PSM is a wideband low noise amplifier capable of providing 17dB gain and +33 dBm OIP3 with a low 1.8 dB typical noise figure. 

The AMM-9619PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz. 

The AMM-8211PSM is a general-purpose broadband MMIC driver amplifier that provides up to +21 dBm output power suitable for driving Marki H or L diode mixers at 22-57 GHz and S diode mixers from 25-50 GHz. 

The AMM-7210ACH is a general-purpose broadband MMIC driver amplifier that provides +20 dBm output power.

The AMM-7200ASM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 12 to 46 GHz, or S diode mixer from 14 to 40 GHz. 

The AMM-7200ACH is a general-purpose broadband MMIC driver amplifier that provides +20 dBm output power suitable for driving a Marki H or L diode mixer at 12-46 GHz and S diode mixer from 14-40 GHz with low current consumption.

The AMM-7199 is a general-purpose broadband MMIC driver amplifier that provides +20 dBm output power suitable for driving a Marki H or L diode mixer at 11-38 GHz and S diode mixer from 15-32 GHz. 

The MPD-0R502CH is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation. 

The MM1-1886HCSP2 is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.

The MFLP-00009CH is a passive MMIC surface mount 4.2 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. 

The MFLP-00008PSM is a passive MMIC surface mount 3 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. 

The MFLP-00008CH is a passive MMIC surface mount 3.2 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.

The MFLP-00007PSM is a passive MMIC surface mount 2 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. 

The MFLP-00007CH is a passive MMIC surface mount 2 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. 

The MFHP-00012CSP1 MMIC surface mount highpass filter is an ideal solution for extremely small form factor, high rejection filtering. 

The MFHP-00011CSP1 MMIC surface mount highpass filter is an ideal solution for extremely small form factor, high rejection filtering.

The MFHP-00010CSP1 MMIC surface mount highpass filter is an ideal solution for extremely small form factor, high rejection filtering.

The MFHP-00009CSP1 MMIC surface mount highpass filter is an ideal solution for extremely small form factor, high rejection filtering. 

The MFHP-00008CSP1 MMIC surface mount highpass filter is an ideal solution for extremely small form factor, high rejection filtering.

The MFBP-00101CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00100CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00089CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00087CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00086CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00085CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00084CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00083CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00082CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00081CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00080CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00079CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00075CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00073CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00072CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00071CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00070CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00069CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00068CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The IADA-2050PSM is an integrated MMIC active doubler fabricated with GaAs Schottky diodes. 

The ADPMVMV is a 2.4mm Male to 2.4mm Male straight angle coaxial adapter.

The ADPMVMK is a 2.4mm Male to 2.92mm Male straight angle coaxial adapter. 

The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. 

The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. 

The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. 

The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. 

The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. 

The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter.

The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. 

The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. 

The ADM-9181PSM is a wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. 

The ADM-9181CH is a wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz.

The MPD2-00001PSM is a small footprint MMIC 2-Way Wilkinson power divider/power splitter featuring high isolation in our compact DFN package. 

The MMPX-00002PSM is a MMIC surface mount quadplexer capable of multiplexing DC-6 GHz / 8-10 GHz / 12-14 GHz / 16-18 GHz signals.

The MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing DC-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals.

The MM1-0626SCSP2 is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. 

The MM1-0626HCSP2 is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.

The MEQ8-70ACH passive MMIC equalizer die is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems. 

The MEQ6-70ACH passive MMIC equalizer die is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems. 

The MEQ4-70ACH passive MMIC equalizer die is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems.

The MEQ14-14ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems. 

The MEQ10-70ACH passive MMIC equalizer die is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems. 

The IADA-2050CH is an integrated MMIC active doubler fabricated with GaAs Schottky diodes.

The C10-2800WG is a WR28 10dB waveguide coupler featuring high directivity over a 26.5-40GHz operational bandwidth. 

The C10-2200WG is a WR22 10dB waveguide coupler featuring high directivity over a 33-50GHz operational bandwidth.

The C10-1900WG is a WR19 10dB waveguide coupler featuring high directivity over a 40-60GHz operational bandwidth. 

The AMM-9025CH is a wideband distributed low noise amplifier capable of providing 14 dB gain from 10MHz to 65 GHz and a low 2.8 dB typical noise figure from 7 to 30GHz.

TheThe ADM-9028PSM is a wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz. 

The ADM-9027PSM is a wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz. 

MFBP-00060PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00003PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00059PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00058PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00057CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00056CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00055CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00054CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00053CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00051CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00050CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

MSW2-1002HLGA is a reflective, single-pole double throw (SPDT) switch.  The switch operates from 100MHz to 20GHz with average insertion loss and isolation of 0.8 dB and 44 dB respectively. 

ATN20-0067CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN20-0067CH provides a nominal 20dB attenuation over a DC-67GHz operating range. 

ATN20-00110CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN20-00110CH provides a nominal 20dB attenuation over a DC-110GHz operating range.

ATN17-0067CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN17-0067CH provides a nominal 17dB attenuation over a DC-67GHz operating range.

ATN17-00110CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN17-00110CH provides a nominal 17dB attenuation over a DC-110GHz operating range. 

ATN15-0067CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN15-0067CH provides a nominal 15dB attenuation over a DC-67GHz operating range. 

ATN15-00110CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN15-00110CH provides a nominal 15dB attenuation over a DC-110GHz operating range.

ATN13-0067CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN13-0067CH provides a nominal 13dB attenuation over a DC-67GHz operating range. 

The ATN13-00110CH is part of a family of precision GaAs MMIC fixed attenuators. The ATN13-00110CH provides a nominal 13dB attenuation over a DC-110GHz operating range. 

The MFBP-00039PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

 MFBP-00038PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

MFBP-00037PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

MFBP-00036PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

MFBP-00035PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

 MFBP-00034PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. 

The MFLP-00006CH MMIC lowpass filter is an ideal solution for small form factor, high rejection filtering. 

The ADM-9027CH is a wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 2.5 dB typical noise figure from 7 to 18 GHz.

The MMIQA-0626HPSM is a versatile, robust, and broadband IQ mixer with an integrated broadband LO driver amplifier.

The MFBP-00046CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00045CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00040CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00027PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00048CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00033PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00029PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00047CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering.

The MFBP-00043CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00044CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00042CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The MFBP-00032PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00030PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00028PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00031PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.

The MFBP-00041CH passive MMIC bandpass filter die is an ideal solution for small form factor, high rejection filtering. 

The HLM-70ACH is a high-power GaAs Schottky diode signal limiter. It offers low insertion loss and low return loss from DC through V band. 

The C10-1200WG is a WR12 10dB waveguide coupler featuring high directivity over a 60-90GHz operational bandwidth. 

The C10-1000WG is a WR10 10dB waveguide coupler featuring high directivity over a 75-100GHz operational bandwidth. 

The C10-1500WG is a WR15 10dB waveguide coupler featuring high directivity over a 50-75GHz operational bandwidth. 

The HLM-100001CH is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band.

The HLM-100001PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band.

The ATN20-0040PSM is a surface mount GaAs MMIC 20dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN15-0040PSM is a surface mount GaAs MMIC 15dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN09-0040PSM is a surface mount GaAs MMIC 9dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN08-0040PSM is a surface mount GaAs MMIC 8dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN07-0040PSM is a surface mount GaAs MMIC 7dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN05-0040PSM is a surface mount GaAs MMIC 5dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.

The ATN04-0040PSM is a surface mount GaAs MMIC 4dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN02-0040PSM is a surface mount GaAs MMIC 2dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The ATN01-0040PSM is a surface mount GaAs MMIC 1dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 

The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. Designed in a leadfree, RoHS compliant CSP2 package.

The MPDW-0670CSP2 is a mmWave 2-way Wilkinson power divider featuring high isolation in our miniature CSP2 chip scale package enabling operation up to 70 GHz. 

The AMM-9024CH is a broadband GaAs MMIC distributed amplifier enabling operation over a DC-70 GHz bandwidth. 

The MFQH-00001PSM is a passive MMIC reflectionless bandpass filter featuring an 18.5-21.2 GHz passband. It is an ideal solution for small form factor, high rejection filtering.

The MPDR-0070CSP2 is a mmWave 2-way resistive power divider in Marki Microwave's new CSP2 chip scale package enabling operation from DC to 70 GHz. 

The BALHE-0009SMG is a surface-mount broadband 1:1 balun, hand-tuned for optimal phase and amplitude balance over 10 MHz to 9 GHz bandwidth.

The MFBT-00003PSM is a surface mount MMIC tunable filter for adaptive filtering applications. This filter offers separate low pass and high pass tuning capability, enabling a customizable bandpass response with a variable % bandwidth and center frequency ranging from 10-26 GHz.

The ADM-8095CH high dynamic range gain block is now available as a wire-bondable die. This high-linearity amplifier provides +21 dBm output power up to 10 GHz with a flat 18 dB gain response across the operating band.

The MMIQA-0218HPSM is a versatile surface mount IQ mixer with an integrated broadband LO driver amplifier. It offers 2-18 GHz RF/LO and DC-3 GHz IF bandwidth support.