AE2250B10760 is a Cavity Bandpass Filter with a group delay variation of 12 ns and features SMA Female connectors.

AE1542B9506 is a Cavity Bandpass Filter with SMA Female connectors. 

AE720B10946 is a Bandpass Filter with a passband ripple of 1.0 dB and has SMA Female connectors.

AE2050B10975 is a Cavity Bandpass Filter with SMA Female connectors and has a power handling of 30 W. 

AE1732B11033 is a Cavity Bandpass filter that has a bandwidth of 45 MHz and a passband ripple of 0.1 dB. 

AE896B11305 is a Cavity Bandpass filter with SMA Female connectors and has a bandwidth of 93 MHz. 

AE7140B1381 is a Cavity Bandpass filter with SMA Female/Male connectors. 

AB2370B867 is a Cavity Bandpass filter with a passband ripple of 0.5 dB Max and a center frequency of 2370 MHz. 

AE2258B11979 is a Cavity Bandpass filter with a bandwidth of 6 MHz Min and SMA Female connectors.

AS2140N325 is a Notch Filter with SMA Female connectors and has a return loss of 14 dB Min. 

AE275B11880 is an LC Bandpass Filter with a 150 to 400 MHz passband and has SMA Female connectors

AB2050B1211 is a Cavity Bandpass Filter with SMA Female connectors and a center frequency of 2050 MHz.

AE710-737DB5474 is an LTE Band 12 Cavity Duplexer with a Band 1 bandwidth of 24 MHz and a Band 2 bandwidth of 18 MHz. 

AD836-881D430 is a Cavity Duplexer with an isolation of 70 dB Min and a bandwidth of 25 MHz on both bands.

AD2050-2230D347is a Cavity Duplexer with a bandwidth of 60 MHz on both bands and features SMA Female connectors. 

High Standard Duplexer separating the DCS 1800 and S band P/N AE1800-2275DB5491 features a very low insertion loss of 0.5 dB in the passband and a high isolation of 80 dB minimum between the bands.

Anatech Electronics LPH Series are 50 ohm high performance lowpass filters, with minimal insertion loss at the cutoff frequency (Fc) and relatively sharp transition to the rejection frequencies. They are designed to remove interference as well as harmonics. Their size ranges anywhere from 2.7" to 14.5" in length, including the connector. The LPH series can be used in a variety of platforms, such as test lab bench measurements and system harmonic reduction.

The AD830-875D207 cavity duplexer for GSM applications has a Band 1 passband of 825 to 835 MHz and Band 2 passband of 870 to 880 MHz. Insertion loss is less than 1.3 dB, ripple is less than 0.2 dB, isolation is 90 dB, rejection ranges from 25 to 90 dB, and return loss is greater than 20 dB.

The AB950B603 cavity bandpass filter has a center frequency of 950 MHz, passband of 940 to 960 MHz, insertion loss of 0.7 dB, return loss of 18 dB, and operating temperaturerange of -40^o to +85^o C. The filter will withstand shock of 20 G (11 ms) and vibration of 20 G, measures 6.6 x 3.5 x 1.5 in., and uses Type-N female connectors.

The AM748B1188 ceramic bandpass filter has a center frequency of 748 MHz, passband of 740 to 756 MHz, ripple of less than 0.7 dB, insertion loss of 2 dB, return loss greater than 14 dB, and rejection of at least 40 dB. It handles 2 W, has an operating temperature range of -20^o to +70^o C and measures 17 x 13 x 5.5 mm.

The AE600H9800 highpass filter has a cutoff frequency of 600 MHz and a passband of 2 to 10 GHz. Insertion loss at its center frequency is less than 2 dB, return loss is greater than 10 dB, rejection is at least 30 dB from DC to 932 MHz, and it is housed in a package measuring 1 x 0.7 5 x 0.243 in. The filter uses Type-N female connectors.

Anatech’s AM836-881D177 ceramic duplexer has a Band 1 passband of 824 to 849 MHz, a Band 2 passband of 869 to 894 MHz, and insertion loss in either band of less than 3.3 dB. Return loss is greater than 13 dB, isolation is greater than 43 dB in Band 1 and greater than 60 dB in Band 2, and rejection ranges between 43 dB and 50 dB.

The AS36CN803 crystal notch filter has a center frequency of 36 MHz, low-side passband of -80 to -2 kHz, high-side passband of 2 to 80 kHz, insertion loss of 4 dB, ripple of 1 dB or less, and has a maximum input power of 10 dBm. The filter uses SMA female connectors.

The  AM1650DC834 directional coupler operates over a frequency range of 800 to 2500 MHz with 15 dB of coupling (+/-1 dB), 20 dB of directivity, 0.4 dB insertion loss, at least 35 dB of isolation, and intermodulation distortion of -140 dBc. It has a VSWR of 1.2:1 and handles 40 W CW. The coupler operates over a temperature range of -30^o to +60^o C, has Type-N connectors, and measures 4.2 x 1.4 x 0.9 in.

The AM1500PD902 two-way power divider cover 800 to 2200 MHz with insertion loss of 0.5 dB, isolation of at least 18 dB, amplitude balance 0.5 dB, phase balance of 5 deg., and VSWR of 1.4:1. It will handle 100 W CW, uses Type-N female connectors, and measures 2.1 x 2.1 x 1 in.

The AE14625-15250DB5370-LNA combines a high-performance duplexer with a low-noise amplifier with excellent noise performance in a compact module. The duplexer’s band 1 is 14.4 to 14.83 GHz, band 2 is 15.15 to 15.35 GHz, insertion loss is less than 2 dB, rejection is at least 60 dB, and power handling ability is 150 W.

The AE70NS2067 notch filter has a notch bandwidth of 68 MHz to 72 MHz, rejection of at least 30 dB, a low-side passband of DC to 64 MHz and high-side passband 76 to 150 MHz. Insertion loss is less than 1 dB, and the filter measures 4 x 1.25 x 0.75 in. and uses SMA female connectors.

The AM1950-2140SD345 SAW duplexer is designed for wireless applications and has very low ripple and insertion loss along with high rejection. Pass-band 1 is 1940 to 1960 MHz and pass-band 2 is 2130 to 2150 MHz. Rejection is up to 52 dB, insertion loss is less than 2.2 dB in either pass-band, in-band ripple is 0.6 dB, and isolation is at least 43 dB.

The AD1950-2140D269 is a high-performance cavity duplexer designed for radar, satellite communications, and other S-band applications. Band 1 is 920 to 1980 MHz and Band 2 is 2110 to 2170 MHz. Maximum insertion loss is 1.5 dB, ripple is less than 0.2 dB, isolation is greater than 90 dB, rejection is at least 90 dB, power handling is 20 W, and return loss is greater than 18 dB.

The AD800-900-1800TR288 tri-band diplexer has a receive frequency range of 806 to 824 MHz, 896 to 901 MHz, and 1850 to 1910 MHz, and transmit frequency range of 851 to 869 MHz, 935 to 940 MHz, and 1930 to 1990 MHz. Its insertion loss is 2.5 dB or less, ripple is 1.8 dB, return loss is greater than 14 dB, and rejection is up to 45 dB.

The AB897B599 cavity bandpass filter has a pass-band of 890 to 905 MHz, low insertion loss of 0.75 dB, and high rejection of 70 dB from 935 to 955 MHz. Passband ripple is less than 0.2 dB and return loss is at least 18 dB. The filter measures 88 x 167.4 x 46 mm and uses SMA female connectors.

The compact AM4400-5000IS103 surface-mount isolator has insertion loss of 0.4 dB or less, isolation of at least 20 dB, and handles forward power of 50 W average and 500 W peak and reverse power of 10 W average and 100 W peak. The isolator operates over a temperature range of -30^o C to +80^o C and measures 0.50 x 0.50 x 0.25 in.

The narrowband AB772B1183 cavity band-pass filter is designed for use in public safety mobile radio systems. It has a center frequency of 772 MHz, pass-band of 769 to 775 MHz, insertion loss of 2 dB, rejection of 40 dB at 700 kHz from band edges, ripple of less than 0.2 dB, and return loss of at least 14 dB.

The AD2535-2655D388 cavity diplexer is an excellent choice for use in wireless applications. Band 1 frequency range is 2500 to 2570 MHz and Band 2 is 2620 to 2690 MHz, and insertion loss is less than 2 dB. Isolation is at least 90 dB, power handling is 50 W, and return loss is greater than 15 dB.

The AE215H9780 LC high-pass filter has a cutoff frequency of 215 MHz and a pass band of 215 to 1000 MHz, making it well suited for a wide range of applications. It has insertion loss of less than 1 dB, rejection greater than 60 dB from DC to 100 MHz, uses SMA female connectors, and measures 2.5 X 1.1 X 0.75 in.

The AD900-1800-2700TR296 is a high-performance cavity triplexer designed for wireless applications in three standard wireless bands. It has rejection greater than 100 dB, power handling of 300 W, insertion loss of 0.35 dB, and return loss of 18 dB, measures only 237 x 131.6 x 55 mm, and uses Type-N female connectors.

The AM10000DC881 directional coupler operates over a broad frequency range of 2 to 18 GHz, making it an excellent choice for electronic warfare, test and measurement, and many other applications. It has coupling of 30 dB +/-1.4 dB, insertion loss of less than 0.5 dB, directivity of at least 12 dB, sensitivity of +/-1 dB, and power handling ability of 400 W average and 3 kW peak.

Our cavity bandpass filters for 700 MHz LTE are available for all uplink and downlink bands and meet the stringent requirements posed by dense channel spacing. They have more than 40 dB of rejection at 700 kHz from passband to stopband at band edges, low insertion loss, and PIM as low as -150 dBc.

Anatech’s standard LC duplexers combine insertion loss of 1 dB or less with isolation greater than 50 dB, return loss greater than 15 dB, and power handling ability up to 20 W.  Anatech LC duplexers are manufactured using inductors and capacitors with a high Q factor, which provides low insertion loss and high selectivity.

Our circulators and isolators are available with connectors or as surface-mount types. Power handling ranges from 2 to 300 W averages and 500 W peaks for circulators and 2 W for isolators.

The AB907B781 cavity bandpass filter is designed for outdoor applications and has a center frequency of 907.5 MHz, 1.5-dB bandwidth of 905 to 910 MHz, insertion loss of 3 dB or less, and out-of-band rejection of at least 75 dB from 850 to 889 MHz and 919 to 950 MHz.

The AM5725B1162ceramic bandpass filter has a center frequency of 5725 MHz, a 1-dB bandwidth of 90 MHz (5680 to 5770 MHz), insertion loss of 5 dB or less, passband ripple of 1.2 dB or less, return loss of at least 12 dB, and rejection of at least 30 dB at 5525 MHz and 5925 MHz.

The AM1485DC854 30-dB dual-directional coupler operates from 800 to 2170 MHz, handles 500 W average and 3 kW peak RF power input, and is well suited for base station RF power monitoring. It has very low third-order intermodulation distortion of -155 dBc, insertion loss of 0.5 dB, coupling flatness of 0.75 dB, directivity of at least 25 dB, and VSWR of 1.07:1.

The AB5350B742 cavity bandpass filter has a center frequency of 5350 MHz, passband of 5100 to 5600 MHz, insertion loss at 5350 MHz greater than 2 dB, and rejection of at least 70 dB from 5735 to 5835 MHz.

The AM1440PD881 two-way power divider operates from 280 to 2500 MHz and has insertion loss of less than 2.5 dB, isolation of 30 dB, amplitude balance better than 0.2 dB, and phase balance of +/-2 deg. The power divider’s VSWR is 1.2:1 or less and power handling ability is 700 W average and 3 kW peak.

The AM1650DC837 is an 8-dB directional coupler that operates from 800 to 2500 MHz with 20 dB directivity, insertion loss of less than 1.1 dB, isolation of 28 dB, and IMD of -140 dBc. VSWR is 1.2:1 or less and power handling ability is 40 W.

The AE800L8686 low-pass filter has a pass-band of DC to 800 MHz with insertion loss of less than 4 dB, ripple of 0.1 dB or less, and rejection at 1000 MHz of at least 40 dB. The filter measures 4 x 1.25 x 0.75 in. and has BNC female connectors.

The AB913B488 water-resistant cavity bandpass filter has a center frequency of 913 MHz, bandwidth of 20 MHz, insertion loss of 1.6 dB, rejection of at least 40 dB at 895 MHz and 931 MHz, and handles 30 W.

The Wifi4S2440-7 cavity bandpass filter has a center frequency of 2440 MHz and is designed for indoor or outdoor use in Wi-Fi hot spots. It has a bandwidth of 2425 to 2455 MHz, insertion loss of less than 2 dB, ripple of less than 2 dB, and return loss greater than 15 dB.

Anatech Electronics introduces its 3-way Power divider AE5000PD882 ranging from 2 to 8 GHz, with insertion loss   1.2 dB, isolation = 18 dB, VSWR of 1.5:1 in a package size of 71 x 31 x 13 mm max. Anatech Electronics is also involved in the design and manufacturing of other low and high power 2,3,4,8 and 16 way power dividers ranging from 10 MHz to 8 GHz.

Anatech Electronics has introduced the AM1650DC838 directional coupler designed for wireless and general-purpose applications from 800 to 2500 MHz. The AM1650DC838 provides 6 dB of coupling with flatness of +/-1 dB from 800 to 2500 MHz, insertion loss of 1.5 dB or less, a VSWR of 1.2:1 or less, and 40 W power handling ability.