Articles by Planar Monolithics (PMI)

PEC-100M6G-3T-SFF-ROHS is a single pole, three-throw non-reflective switch designed to operate over the 0.1 to 6 GHz frequency range.

PE2-25-200M18-3D5-25-SFF is a 0.2 to 18 GHz Low Noise Amplifier that provides >23 dB of gain while maintaining a maximum gain flatness of ±2 dB maximum over the operating frequency. 

JTIDS-0002 is an ultra-small band reject filter centered at 1.09 GHz that rejects frequencies from 0.96 to 1.22 GHz. 

DTA-0R4G18G-60-CD-1 is a 10 Bit Non-Reflective Programmable PIN Diode Attenuator that operates from 0.4 to 18 GHz that provides an attenuation range of 60 dB (0.06 dB steps) with an accuracy of ±1 dB. 

LM-0R1G4G-100W-15DBM-SMF is a high-power limiter that operates over the 0.1 to 4 GHz frequency range and can handle an input power of 100 W CW. 

PLDRO-18D6G-25M-EXT-ROHS is a PDRO with an output frequency of 18.6 GHz and a minimum output level of 13 dBm. 

PLNA-35-100M18G-P1dB24-120VAC is a portable amplifier that operates over the 0.1 to 18 GHz frequency range that provides 35 dB minimum gain with a minimum OP1dB of 22 dBm. 

BPF3D875-2D25-CD-SFF is a Bandpass filter that has a center frequency of 3.875 GHz and a Passband of 2.25 GHz. 

LM-118-100W-22DBM is an RF Limiter that operates in the range of frequencies from 1 to 18 GHz that can handle up to 100 W CW over temperature (-55 to +85 °C). 

PE2-16-2R06R0-1R8-12-12-SFF is a low noise amplifier that operates over the frequency range of 6 to 18 GHz designed for military and industrial applications.