Articles by Master Bond Inc.


High Temperature Resistant Adhesive: MS600SCN

Featuring a silver coated nickel filler, MB600SCN is an aqueous based, sodium silicate system for use in applications where very good shielding effectiveness is required and cost considerations might be more pronounced. Conductive coatings are often applied to housings in order to protect electronic devices from EMI and RFI.

Read More

One Component Temperature Resistant Epoxy: EP13LTE

Featuring a low coefficient of thermal expansion (CTE) of 15-20 x 10-6 in/in/°C, Master Bond EP13LTE is a one part epoxy for structural bonding applications. EP13LTE cures readily in 1-2 hours at 300 to 350°F. This epoxy paste has limited flow while curing. It bonds well to many substrates such as metals, glass, composites, ceramics and plastics.

Read More

Two Component Epoxy System: EP29LPHE

Master Bond EP29LPHE is a two component epoxy system with a low mixed viscosity of 350 to 700 cps. This low shrinkage/low exotherm product is particularly well suited for large volume casting applications as well as bonding, coating and sealing. EP29LPHE has a forgiving 100 to 80 mix ratio by weight and has an exceptionally long working life of 12 to 24 hours at room temperature for a 100 gram batch. It will cure at room temperature or more rapidly at elevated temperatures.

Read More

Two Part Epoxy with Low Exotherm: EP21LVSP6

EP21LVSP6Suitable for large castings, EP21LVSP6 is a room temperature curing system with a long open time and a low viscosity. This epoxy features a convenient one to one mix ratio and can also be used in bonding, sealing and coating applications. It has very good physical strength properties as well as being an excellent electrical insulator. 

Read More

Single Component Fast Setting Epoxy: Supreme 3HTND-2DA

Supreme 3HTND-2DAWell suited for die attach applications, Supreme 3HTND-2DA is a single component fast setting epoxy that doesn’t require mixing or freezing. This toughened system has high die shear strength, superior electrical insulation properties, low ionics, an ideal dispensing profile (no tailing or bleed out) and performs well in 85/85 testing. It also passes NASA low outgassing tests. 

Read More

High Temp Resistant Silicone System: MasterSil 711

MasterSil 711One component Master Bond MasterSil 711 is a room temperature curing silicone compound for bonding, sealing, coatings and formed-in-place gaskets. It offers superior shock and impact resistance making it ideal for delicate electronic components. Flexible bonds are formed when exposed to atmospheric moisture. MasterSil 711 requires no mixing or heat, and sets within 2-3 minutes. 

Read More

Silver Coated Nickel Conductive Epoxy: EP79FL

EP79FLMaster Bond’s epoxy EP79FL is a silver coated nickel filled polymer system that forms high strength bonds even at extreme cryogenic temperatures. It is electrically conductive and has minimal sagging while maintaining thermal cycling resistance. EP79FL is a strong and flexible system with exceptional chemical resistance properties. The electronic, electric, computer, semiconductor, microwave, appliance and automotive industries use it extensively. 

Read More

Two Component Epoxy: EP46HT-1AO

EP46HT-1AOWith exceptional thermal conductivity and electrical insulation properties, EP46HT-1AO is a two component epoxy for high performance bonding and sealing applications. This high temperature resistant system cures readily with heat and offers a long open time at room temperatures. It provides noteworthy dimensional stability, chemical resistance and physical strength properties. 

Read More

Two Part Epoxy: EP48TC

EP48TCSpecially formulated, two part epoxy EP48TC has ultra low thermal resistance of 5 to 7 x 10 to 6 K•m2/W. This system uses high thermal conductive fillers and is capable of being applied in bond lines as thin as 10-15 microns. It also features unmatched thermal conductivity of 20-25 BTU•in/ft2•hr•°F [2.88-3.60 W/(m•K)]. EP48TC has first rate electrical insulation properties over the wide service temperature range from -100°F to +300°F. 

Read More