Anatech Electronics Inc.: TCAS Ceramic Bandpass Filter
Anatech Electronics Inc. introduces their new Ceramic Monoblock Bandpass filters used in TCAS communication. Low insertion loss and good rejection in a small package size are the most prominent features of these filters. AE1090B616 covers a frequency range of 1087 MHz – 1093 MHz with a passband I.L of 2.45dB typ and attenuation of 30dB min @ 1065 MHz and 1115 MHz. The part is fully ROHS compliant and available in a package size of 33.58 X 7.85 X 10.36 (mm) max.
Visit Anatech Electronics Inc.'s Vendor View -->
Anritsu: Fast-Switching Microwave Synthesizer
The MG37020A fast-switching microwave signal generator utilizes an advanced VCO-based hardware architecture to achieve frequency switching speed of 100 µsec per point. The MG37020A is well suited for integration into automated test systems used in defense signal simulation and manufacturing ATE where minimum test time and maximum throughput is critical.
Visit Anritsu's Vendor View -->
Berkeley Varitronics Systems: Yellowjacket® B/A/G
Yellowjacket® B/A/G is a wireless test receiver system that demodulates, sweeps, analyzes, and optimizes all popular 802.11 Wi-Fi network standards including 802.11b/g (2.4 GHz), 802.11n, 802.11h and 802.11a (5 GHz). The calibrated receiver is a passive measurement device that is network independent so it remains "invisible" to any 802.11 Wi-Fi network. It is also a spectrum analyzer that measures RF energy (2.0-4.0 & 4.9-5.9 GHz) allowing detailed interference analysis.
Visit Berkeley Varitronics Systems' Vendor View -->
JFW's Handover Test Systems are designed for proving wireless device performance at the network level. Each system comes complete with "handover" function commands written into the firmware. This function steps up the attenuation on one RF path from minimum to maximum while stepping it down from maximum to minimum on another path. Each system is customizable and is available with RS-232, GPIB, or Ethernet interface.
Hi-Rel offers several microelectronic packages for military and space applications. These glass to metal seal packages are an excellent choice for RF applications for lower dielectric constant of Glass versus Alumina Ceramic packages.
Santron's new eSMA connector addresses the problem of signal transmission and fragility of solder joints in hand-formable cable assemblies. Santron eSMA connectors feature the following VSWR performance: 1.10 up to 12.4 GHz, 1.20 from 12.4 to 18 GHz, and 1.31 from 18-26 GHz. Cable assemblies are delivered with these eSMAs professionally installed on Times Microwave Systems TFlex™ cable.