Products

RSS

LM-10M62G-20DBM-1W-24FF is a limiter passive has been designed for minimal insertion loss that operates over the 10 MHz to 62 GHz frequency range.

SDLVAC-0120-70M is a miniature successive detection log video amplifier that operates over the 0.1 to 2.0 GHz frequency range.

PEC-100M20D1G-20LM-SFF OPT-25DBM is a limiting amplifier covering the RF frequency range of 100 MHz to 20.1 GHz.  Features a minimum limiting input range of -25 to +16 dBm.

PE2-30-218-4R0-20-12-SFF-BT is a 2.0 to 18.0 GHz Low Noise Amplifier that has an integrated bias-tee network on the output port. 

PMI Model No. PEC-40-25-0R518-20-12-SFF-TTLVG is a Dual Gain Amplifier operating over the frequency range of 0.5 to 18.0 GHz.  

PEC2-1R8G6R2G-17DBM-LM-SFF is a 1.8 to 6.2 GHz limiting amplifier that provides a limited output power level of +12 dBm to +17 dBm for an input power range of -67 to +10 dBm.

MBX33 MilliBox is designed for applications between 18 and 95 GHz and comes with 8 ft in length, 22” x 22” interior cavity section and ~2 m far field distance.

SKYA21043 incorporates a 5 GHz single-pole, double-throw transmit/receive switch, a 5 GHz high-gain low-noise amplifier with bypass and a 5 GHz power amplifier intended for high-power 802.11p applications and systems. 

 R&S QAR-K50 single-cluster measurement software, OEMs and tier 1 suppliers are able to achieve measurement results very close to those obtained with a VNA and a quasi-optical setup.

Features include: compact and economical, 80 cm far-field distance, gimbal and horn mounts included, laser guided alignment, open software controller interface over USB.