Passive Components

RSS

PMI Model No. HPF18G-DC15G is a low loss ultra-small high pass filter with a passband frequency range of 18.0 to 26.5 GHz and greater than 60 dB rejection from DC to 15.0 GHz.  Features include 2.92mm female connectors. Unit size is Features include 2.92mm female connectors. Unit size is 0.64" x 0.58" x 0.38". 

PMI Model No. DPX-18G26R5G40G is an ultra small, low loss diplexer for use over the frequency range of 18.0 to 40.0 GHz.  This model is designed to have a crossover frequency at 26.5 GHz and greater than 60 dB of rejection.  Features include 2.92mm female connectors. Unit size is 0.80" x 0.60" x 0.38". 

PMI Model No. 2SFB-8G26G-CD-SFF Rev C is a 2 channel switch filter bank providing a low-pass filter that passes 8.62 to 8.70 GHz with a rejection band of 17.24 to 17.4 GHz.  In by-pass mode the unit passes signals from 8.0 to 26.5 GHz.  This unit is powered by a +5 V single supply and the control logic is TTL/CMOS +5 V compatible.

PMI Model No. 11DP-11R5/16R5-CD-SFF-1 is a diplexer that offers pass bands at 10.75 to 12.25 GHz and 15.75 to 17.25 GHz.  The pass band insertion loss is less than 3 dB and the VSWR is 1.5:1 maximum.  Filter channel 1 has a pass band of 10.75 to 12.25 GHz and offers -50 dBc of rejection at 10.25 GHz and -75 dBc of rejection at 13.75 GHz.  Filter channel 2 has a pass band of 15.75 to 17.25 GHz and offers -50 dBc of rejection at 17.75 GHz and -75dBc of rejection at 14.25 GHz. 

PMI Model No. PIA-12D8G-CD-1 is a Phase Locked, Dielectric Resonator Oscillator with Internal Reference having an output frequency of 12.8 GHz.  This model provides a minimum output of +13 dBm with all spurs held to -80dBc and harmonics held to -25 dBc.  The frequency stability is ±3 ppm with an internal reference of 100MHz.  The phase noise is as follows: -34 dBc/Hz at 1 Hz, -65 dBc/Hz at 10 Hz, -85 dBc at 100 Hz, -10 8dBc/Hz at 1 kHz, -115 dBc/Hz at 10 kHz, -12 0dBc/Hz at 100 kHz, and -140 dBc/Hz at 1 MHz offsets. 

Mini-Circuits has expanded the company’s offering of surface-mount couplers with a series of stripline-based models providing extremely high power handling in a miniature, low-profile printed laminate form factor. Model BDCH-35-272 is a bi-directional coupler which achieves 150 W RF power handling for applications from 700 to 2700 MHz including DAS, transmission signal monitoring, antenna reflection monitoring and more.

TRAK Microwave, a Smiths Interconnect brand, is pleased to re-announce TRAK X-Band Surface Mount (SMT) Circulators after initial market adoption and installation. These units are low-cost, true pick-and-place compatible (tape-and-reel) components with standard solder reflow profiles. They are designed to replace “drop-in” and microstrip style circulators.

PMI Model No. BP13G-10G-CD-SFF is a suspended substrate bandpass filter that offers a wide passband of 8 to 18 GHz.  This filter offers a low insertion loss of 1.5 dB typically and a passband VSWR of 2.0:1 maximum.  Stopband rejection of 70 dB typical is provide from DC to 6 GHz and from 20 to 23 GHz.