AR RF/Microwave Instrumentation has introduced a family of solid-state microwave amplifiers that provide up to 500 W of power from 1 to 2.5 GHz. These amplifiers offer a solid-state alternative to traveling wave tube amplifiers and feature better harmonics, less noise and superior reliability.
RSS
PMI Model No. PEC3-33-218-20-15-SFF-HS-E is a 2.0 to 18.0 GHz low noise amplifier that provides greater than 33 dB of gain while maintaining a maximum gain flatness of ±2.0 dB maximum over the operating frequency. The noise figure is 4 dB typical and offers an OP1 dB of +20 dBm minimum and an OIP3 of +30 dBm typical. The operating voltage is +15 VDC and the current draw is typically 350 mA.
PMI amplifier Model PEC-38-30M18G-12-SFF is a broadband, low noise amplifier that operates over the 30 MHz to 18 GHz frequency range. This model provides 38 dB of gain and has a gain flatness of ±2.0 dB maximum.
PMI Model No. PBB-20-218-16-LCA is a 2.0 to 18.0 GHz low noise amplifier which provides 20 dB of gain while maintaining a gain flatness of ±2.0 dB maximum over the operating frequency. The noise figure is 4 dB typical and offers a typical OP 1 dB of +14 dBm minimum.
PMI Model No. PE2-1020-R518-12-SFF is a low noise amplifier that offers a positive gain slope versus frequency. This type of amplifier is useful when trying to equalize frequency flatness over a broad bandwidth. This model provides 10 dB of gain at 500 MHz and 20 dB of gain at 18 GHz.
PMI Model No. PEC-85-0R32R5-15LM-12-SFF is a limiting amplifier that operates over the frequency range of 300 MHz to 2.5 GHz. This model provides a gain of 85 dB typically and a limited output of +15 dBm ± 2.5 dBm.
Empower RF model BBM5K8CKT (SKU 1191) is a 2500 to 6000 MHz amplifier which is guaranteed to deliver 100 W output power and related RF performance under all specified temperature and environmental conditions. The amplifier module is 8.0” x 6.5” x 1.0”. This amplifier is suitable for broadband jamming and high power linear applications in the S / C bands.
PMI Model No. PUB-15-30M20G-20-LCA is a 30MHz to 20.0GHz low noise amplifier which provides 15 dB of gain while maintaining a gain flatness of ±2.5 dB typically over the operating frequency. The noise figure is 3 dB typical and offers a typical OP1 dB of +20 dBm. The amplifier requires +12 to +15 VDC and the current draw is 225 mA typical.
PMI Model No. PUB-14-30M20G-14-LCA is a 30 MHz to 20.0 GHz low noise amplifier which provides 14 dB of gain while maintaining a gain flatness of ±1.2 dB typically over the operating frequency. The noise figure is 3 dB typical and offers an OP1 dB of +14 dBm typical.
PMI Model No. PE2-30-218-4R0-20-12-SFF-BT is a 2.0 to 18.0GHz low noise amplifier that has an integrated bias-tee network on the output port. This amplifier provides 30 dB of gain while maintaining a maximum gain flatness of ±2.0 dB max over the operating frequency.