Model 30HM1G6AB-45 is a compact, wide-band, Class AB hybrid solid state power amplifier module that instantaneously covers 1 to 6 GHz. It operates from a single DC voltage and provides 48 dB of typical gain with excellent gain flatness, noise figure and low intermodulation distortion.
RSS
RFMW, Ltd. announces design, sales support and availability of TriQuint Semiconductor’s TAT8804D1H ultra-linear GaAs amplifier MMIC intended for output stage amplification in CATV infrastructure applications where flat gain and low distortion are key considerations.
RFMW, Ltd. announces design and sales support for Scintera Networks SC1894 radio frequency power amplifier linearizer (RFPAL). As power amplifiers are driven into saturation they increase in both efficiency and distortion. The SC1894 injects a correction signal at the input of the PA in order to minimize distortion at the output of the PA. The result is higher output power from the PA and increased efficiency.
PMI Model No. PE2-15-8G20G-4R0-20-SFF is a 8.0 to 20.0 GHz, low noise amplifier that provides 12 dB min of gain with a typical gain flatness of +/-1.25 dB. The noise figure is 4.0 dB typ and offers an OP1 dB of 20 dBm typ. The operating voltage is +11 to +15 VDC and the current draw is 225 mA nom.
PMI Model No. PE2-30-1R06R0-1R5-22-12-SFF is a 1.0 to 6.0 GHz, low noise amplifier that provides 30 dB of gain typically. The typical noise figure is 1.8 dB and offers an OP1 dB of 22 dBm typ. The operating voltage is +12 to +15 VDC max and the current draw is 320 mA typ.
PMI Model No. PLN-17-110-15-LCA is a 1.0 to 10.0 GHz, low noise amplifier that typically provides 17 dB of gain. The typical noise figure is 2.0 dB and offers an OP1 dB of 13 dBm min. The operating voltage is +12 to +15 VDC and the current draw is 65 mA max.
PMI Model No. PE210R258R515SFFLM Rev. B is a 0.25 to 8.5 GHz, low noise amplifier with a small signal gain window of +9.0 to +13 dB. The noise figure for this unit is <=4.5 dB max (valid from 0.5 to 8.5 GHz) and offers an OP1 dB of +16 dB min. The operating voltage is +12 VDC and the current draw is 300 mA max.
Model SBL-7438433060-1212-S1 is an E band low noise amplifier with center frequency at 79 GHz with ± 5 GHz operation bandwidth. The amplifier is designed and fabricated for emerging automotive ACC radar industry applications. The amplifier exhibits more than 30 dB small signal gain with ± 2 dB gain flatness and around 6.0 dB noise figure.
Model SBP-7438433012-1212-S1 is an E band power amplifier with center frequency at 79 GHz with ± 5 GHz operation bandwidth. The amplifier is designed and fabricated for emerging automotive ACC radar industry applications. The amplifier exhibits more than 30dB small signal gain with ± 3 dB gain flatness.
PMI Model No. PEC-42-1G40G-20-12-292FF is a 1.0 to 40 GHz, ultra-wideband low noise amplifier that provides 42 dB of gain typically with a typical noise figure of 5.5 dB. The OP1dB is typically +22 dBm (1.0 to 18.0 GHz) and +19 dBm (18.0 to 40.0 GHz). The maximum input power rating is +17 dBm CW and the operating DC supply is 550 mA at +12 to +15 VDC.