RFMD’s new RFHA104x series of high-power GaN broadband power transistors (BPTs) are optimized for military communications, commercial wireless infrastructure, and general purpose applications. These high-performance amplifiers achieve high power with high efficiency and flat gain over a broad frequency range in a single amplifier design.
RSS
The HHPAE-459 power amplifier covers the frequency range from 71.0 to 76.0 GHz. The amplifier has an output P1dB of +18 dBm with small signal gain of 29 dB. MMIC technology is employed for high reliability and repeatability.
Cernex’s CBP series amplifiers are designed for use in a wide range of general purpose applications such as laboratory test equipment, instrumentation and other applications requiring high power output. Reliable operation is achieved using rugged strip line circuit construction with selected GaAs FET devices.
Model SDLVA-0R71R3-75-CD-3 is a successive detection log video amplifier that operates over the 700 to 1300 MHz frequency range. This model has a Dynamic Range of 75 dB, a log slope of 40 mV/dB. The log linearity is ±1.2 dB typical from -65 to +5 dBm input power levels and a typical TSS of -70 dBm.
Model SDLVA-0R71R3-75-CD-1 is a successive detection log video amplifier that operates over the 700 to 1300 MHz frequency range. This model has a dynamic range of 75 dB, a log slope of 40 mV/dB and a nominal video bandwidth of 20 MHz. This model offers very fast rise times of 9 nsec and fall times of 25 nsec typically.
PMI Model No. PEC2-60-4G8G-1R75-14-12-SFF is a 4 to 8 GHz low noise amplifier that typically provides 60 dB of gain. The gain flatness is ±1.25 dB maximum with a noise figure is 1.75 dB maximum. This amplifier provides a minimum OP1 dB of +14 dBm.
PMI Model No. PE2-30-0R56R0-5R0-22-12-SFF is a 500 MHz to 6.0 GHz low noise amplifier that typically provides 30 dB of gain. The gain flatness is ±1.0 dB maximum with a noise figure is 5.0 dB typical. This amplifier provides a minimum OP1 dB of +21 dBm.
PMI Model No. PE2-28-20R040R0-5R5-18-12-SFF is a 20 to 40GHz low noise amplifier that typically provides 28 dB of gain. The gain flatness is ±2.5 dB maximum and ±1.5 dB typical with a noise figure is 5.5 dB typical. This amplifier provides a minimum OP1 dB of +15 dBm minimum.
Custom MMIC is offering a new device from their growing MMIC library of standard products. The CMD173 is a wideband GaAs MMIC distributed amplifier die for applications from DC to 20 GHz. This device delivers greater than 15 dB of gain with a corresponding output 1 dB compression point of +18 dBm, and a noise figure of 1.5 dB at 8 GHz.
RFMD's RFCA1008 is a high performance InGaP HBT MMIC amplifier designed with the InGaP process technology for excellent reliability. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. A Darlington configuration is utilized for broadband performance.