Right Angle Adapters

The UG-27 C/U is a right angle adapter that features solderless construction. The solder-free construction offers dependability equal to a straight plug while achieving 90° bends. The solder-free adapters also address RoHS compliancy issues by reducing lead content. The 50 ohm UG-27 C/Us perform efficiently up to 11 GHz and are rated for operating voltages of 1000 V RMS. The right angle adapters have a maximum dielectric withstanding voltage of 2000 V RMS at 60 Hz at sea level. They are designed for a temperature range of -65° to +165°C and meet interface standards in accordance with MIL-STD-348. VSWR is 1.15 from DC to 6 GHz, and 1.35 from 6 to 11 GHz.


San-tron Inc.
Ipswich, MA
(978) 356-1585

www.santron.com

RS No. 233


60 GHz Converter

The FC1001V/00 broadband converter is a versatile building block for 60 GHz applications. It combines an up-converter and a down-converter in a single unit. Both operate independently and can thus be used for both frequency multiplexed and time multiplexed applications. The converter has the advantage of using external LO sources, with the user having full control of phase noise and frequency selection. Frequency multipliers (x8) are integrated in both the up-converter and the down-converter. The LO injection is done at 7 GHz with +0 dBm power. Other features include: 57 to 63 GHz RF bandwidth, > 1 GHz IF bandwidth and +10 dBm typical output power. Applications include point to point or multipoint radio, EW, secure communication and measurement.

Sivers IMA AB
Kista, Sweden
+46-8-7036800

www.siversima.se

RS No. 234


Surface-mount Intelligent Synthesizers

The MFSH series of tiny surface-mount intelligent synthesizers with on-board microcontroller allows for self-programmable fixed frequency or wideband signal generation from a 0.6" package. Several models are available starting with frequencies from 1350 to 6500 MHz. Models are available with step size starting at 500 kHz.

Synergy Microwave Corp.
Paterson, NJ
(973) 881-8800

www.synergymwave.com

RS No. 251


Surface-mount Feedthrus

This mini surface-mount 50 ohm feedthru is based on Thunderline's successful initial SMT Bell Pin offering. This new product has been designed to emulate the existing design, but will be one third less in size and will be built with a smaller pin. The use of a smaller pin in its new mini surface-mount package will enable Thunderline customers to use this part in both J-band and K-band frequency ranges. Based on initial expectations Thunderline anticipates this part will perform to limits somewhere between 22 and 25 GHz.

Thunderline-Z
Hampstead, NH
(603) 329-4050

www.thunderlinez.com

RS No. 235


Voltage-controlled Oscillator

This RoHS compliant voltage-controlled oscillator (VCO) model ZRO1560A1LF is designed for L-band. The ZRO1560A1LF operates at 1560 MHz with a tuning voltage range of 0 to 5 Vdc. This VCO features a typical phase noise of -121 dBc/Hz at 10 kHz offset and a typical tuning sensitivity of 0.7 MHz/V. The ZRO1560A1LF is designed to deliver a typical output power of 0 dBm at 5 VDC supply while drawing 18 mA (typical) over the temperature range of -40° to 85°C. This VCO features typical 2nd harmonic suppression of -30 dBc and comes in Z-Comm's industry standard MINI-16 package measuring 0.5" x 0.5" x 0.22".

Z-Communications Inc.
San Diego, CA
(858) 621-2700

www.zcomm.com

RS No. 236


Amplifier

Miniature RF Amplifier

Herotek's model A402277 operates in a frequency range from 26 to 40 GHz and provides the user with an amplifier in its small package Ò1CÓ (size: 0.62" 0.66" 0.22"). It offers gain of 30 dB and gain variation of ±2.0 dB. Noise figure of 6.0 dB and P Out at 1 dB and compression is +16 dBm. Nominal DC current at 12 V is 400 mA. Application includes telecom infrastructure MW Radio and VSAT.

Herotek Inc.
San Jose, CA
(408) 941-8399

www.herotek.com

RS No. 237


Antennas

Flat Panel Antenna

Model FPA13-2.2R/1533 is a small (195 by 163 by 12.6 mm) flat panel antenna with directional beam pattern, 40° azimuth by 40° elevation. Its frequency range is 2.2 to 2.35 GHz and it has 13 dBi gain with right hand circular polarization. It is designed for use within an information system for telemetry applications in the defence and surveillance industries. It can be incorporated into an existing multi-sector framework, and conforms to existing technical and environmental specifications. The antenna can be used in a range of applications, providing operators with flexibility when designing network systems, and may also be used in industries where data is commercially valuable.

Cobham Antenna Systems, Microwave Antennas
Cheveley, Newmarket, UK
+44 (0) 1638 732177

www.cobham.com/antennasystems

RS No. 238


Broadband Horn Antennas

Cobham Sensor Systems' H-1498 series broadband linear horn antennas provide superior performance for use in a wide variety of laboratory, commercial and military applications. With excellent input VSWR over the 2 to 18 GHz band, these antennas provide high gain across the frequency range and consistent pattern performance. They have become a laboratory standard as a reference horn in anechoic chambers and outdoor ranges. The H-1498 is available with SMA female connector (standard) and TNC female connector (H-1498T). A further option is a radome/aperture cover (H-1498R) for outdoor use.

Cobham Sensor Systems
Lansdale, PA
(215) 996-2416
www.cobhamdes.com

RS No. 239


GPS Antenna Module

The A1035-H antenna module, with a footprint of 16.5 by 30.5 mm2, is based on the company's A1084 GPS receiver. It is designed around the SiRFstar III GPS chip and is optimized for use with passive antennas. With the on-module antenna tuned to the receiver, a high level of sensitivity is achieved. Furthermore, the A1035-H has been especially designed for an extremely low current draw (an average of 85 mW in tracking mode), fulfilling the latest requirements for more integration and cost-saving solutions.

Vincotech GmbH
Unterhaching, Germany
+49 (0) 89 8780 670

www.vincotech.com

RS No. 240