Werlatone®, a leading supplier of high-power, broadband passive RF components that include RF directional couplers, combiners and dividers, announces the Model D12628-12. This 4-way RF combiner/divider covers the full 2 to 18 GHz frequency band and it is rated at 200 W CW. The Model D12628-12 supports military and commercial applications and operates with less than 1.1 dB of insertion loss over the entire frequency range. The D12628-12 operates with better than 1.40:1 VSWR from 2 to 16 GHz and better than 1.60:1 from 16 to 18 GHz. The Model D12628-12 RF is supplied with an N-type connector at the sum port and SMA at the input ports while measuring just 1.7 x 1.7 x 2.5 in.

Werlatone also offers an accompanying, low loss, high directivity 2 to 18 GHz, 250 W CW 40 dB dual directional coupler which enables our customers to accurately monitor power levels across the entire band.

Werlatone directional couplers, combiners and dividers are designed to operate into high load VSWR conditions, for extended periods and our Mismatch Tolerant® RF directional couplers and combiners/dividers enable continuous operation into open or short conditions. When specified, high-power RF combiners tolerate input transmitter failure conditions to ensure a failsafe mode that enables the remaining transmitter(s) to operate until the system can be shut down properly. Werlatone designs also ensure adequate heat dissipation for non-coherent combining applications where two or more input signals may operate at different frequencies, power and/or phase signals on the ports.

Werlatone, Inc.
Patterson, N. Y.
www.werlatone.com/product-category/combiners/inphase-connectorized/