Anoison PLEX Series Cable
Anoison, known for not only the best solutions for your RF/microwave interconnect requirements, but also the most value with outstanding quality and fast delivery, now offers ANOISON PLEX, a high frequency flexible coaxial cable series. Using special expanded PTFE tape dielectrics and combined with their broad range of RF/microwave connectors, the PLEX series allows the creation of high performance assemblies with excellent loss, VSWR and phase stability. PLEX is the answer for many applications including VNA test cables and radar systems.
Anoison Electronics LLC
www.anoison.com
Cobham Phase Matched Cables
Cobham cable assemblies are featured in military, space and high performance commercial applications. Cables range from 0.09 in. diameter FZ09, a very flexible cable, to the large 0.92 in. diameter FE92 flexible cables, with extremely low insertion loss for special ground-based applications. Cables boast excellent electrical performance, proven reliability and overall mechanical strength, providing the best cable-to-connection transitions in the industry. Designed and manufactured in a single location, customers receive full cable assemblies tested to their specific requirements.
Cobham Advanced Electronic Solutions
www.cobham.com/rfcables
Receiver Products
CPI Beverly Microwave Division is the world’s largest manufacturer of receiver protectors. CPI BMD designs and manufactures a broad range of RF/microwave products for radar, communications, EW, medical and scientific applications. They also manufacture a broad range of pressure windows and pressure bypass windows. Their products are found in numerous radar systems operated by the U.S. military and militaries around the world. Contact CPI Beverly Microwave Division at BMDMarketing@CPII.com for high-power microwave components.
CPI Beverly Microwave Division
www.cpii.com/product.cfm/8/1
DynaTest™ HD for High Density Testing
The power of repeatable and reliable performance! DynaTest™ series cable assemblies offer exceptionally low VSWR and insertion loss characteristics across a broad frequency range: DC to 40 GHz. These assemblies are highly flexible and are ideal for testing switch matrices or high density backplanes. Featuring spacing < 0.5 in. centerlines, SMA hex/knurl coupling nuts facilitate quick mating, stainless steel connectors, excellent strain relief at cable-connector junction and 100 percent RF tested.
Dynawave Inc.
www.dynawave.com
LLS290 18 GHz Low Loss Coax
Harbour developed LLS290 to achieve the lowest possible insertion loss at 18 GHz by utilizing expanded PTFE dielectric and proprietary shielding. The expanded PTFE dielectric provides velocity of propagation greater than 80 percent. The manufacturing process ensures excellent phase stability over temperature. The LLS290 is smaller and lighter compared to solid dielectric coax. The proprietary shield design provides < −110 dB shielding effectiveness.
Harbour Industries LLC
www.harbourind.com
1-5/8 EIA Flange
IW is pleased to introduce a 1-5/8 EIA flange for use with 4806 cable. Cable attachment method is solder clamp to ensure minimal impedance variation and low VSWR, and body material is brass to provide optimum thermal performance. Flange assemblies can be supplied with the interface bullet if required. Customer testing has proven 4806 capable of handling 17 KW at 13.56 MHz for semiconductor material processing and is also widely used for EMC testing and other high-power commercial and military applications.
IW Microwave Products Division
www.iw-microwave.com
T26 Series High Performance Test Cables
MIcable T26 series test cables are super flexible and reliable test cables. Even after 150,000 strict bending cycles, they still have the performance of phase stability vs. flexure < ±2°, amplitude stability vs. flexure < ±0.04 dB, insertion loss < 2.53 dB/m and VSWR < 1.25:1 at 26.5 GHz. They are ideal for the application like lab and production test, 5G OTA and phase array antenna test.
MIcable Inc.
www.micable.cn
CATV/Broadband Product Guide
As consumer demand for higher data capacity continues to intensify, network operators deploying optical and hybrid-fiber-cable (HFC) infrastructure continue to push the limits of their equipment under the DOCSIS® 3.1 standard. Mini-Circuits’ CATV/Broadband product guide provides information on a wide range of components from passive devices including transformers, couplers and splitter/combiners to active elements including amplifiers, equalizers and more.
Mini-Circuits
www.minicircuits.com
RF Interconnect Products
Richardson RFPD provides a comprehensive RF Interconnect product and vendor portfolio. From high-end, space-qualified coaxial cables, connectors, attenuators and terminations to low-cost, commercial-grade solutions, they stock all major transmission line components for a range of applications, including wireless infrastructure, microwave telecommunications, military RF installations, radio tower sites, satellite Earth stations, navigation systems and broadband. Given their extensive applications engineering experience, product knowledge, technical aptitude and flexibility, Richardson RFPD is ready to supply all of your RF Interconnect product needs.
Richardson RFPD
www.richardsonrfpd.com/interconnect
New Series RPC-1.35 Connectors
Rosenberger introduces a new precision connector series to meet the increasing demand for proper RF-connections up to 90 GHz. The newly developed RPC-1.35 connector series—the “E connector”—is characterized by a highly robust mechanical design, min. 3000 mating cycles, high connector repeatability, max return loss values and designed for high performance RF measurements in the E-Band without delays.
Rosenberger
www.rosenberger.com
Lab-Flex® T Series
Lab-Flex® T cable assemblies are mechanically robust and specifically designed to minimize phase change while maintaining excellent return loss when subjected to a wide range of operational temperatures; an ideal fit for radar, satellite and test applications. Their special foam dielectric material provides a much lower attenuation than solid PTFE. Precision Connector interfaces meet MIL-STD-348 requirements and are designed for maximum frequency capability up to 50 GHz. T cables are pretested and available in standard mechanical lengths or phase-matched electrical lengths as needed.
Smiths Interconnect
www.smithsinterconnect.com
High-Power Adapters of Series 8058
Spectrum Elektrotechnik GmbH is introducing High-Power 18 GHz Adapters of Product Category 8058-, which shows Series and In-between Series Adapters of Types N and TNC. The units use special heat dissipating dielectric between Center Conductor and Outer Conductor, and have Cooling Fins to dissipate power to the environment. In addition, the High-Power Hermetic Sealed Adapter Series have been expanded as well, now operating to 18 GHz for N and TNC Series.
Spectrum Elektrotechnik GmbH
www.spectrum-et.org/
Protecting Active In-Building Solutions
SPINNER’s Power Protector prevents sudden high-power surges from damaging low-power devices. It monitors the power carried by RF transmission lines and automatically interrupts it if it exceeds a predefined threshold. A typical application is monitoring the connection between a BTS module and an In-Building master unit. Beside protecting devices, this also lets operators achieve significant cost savings with BTS and A/C by safely operating the BTS in low-power mode.
SPINNER
www.spinner-group.com
Clarity™ Series 40 GHz Test Cables
Times Microwave introduces its new Clarity Series of 18, 26.5 and 40 GHz coax test cables. Clarity boasts steel torque, crush and overbend protection with abrasion resistance yet does not compromise flexibility. The cable is ultra stable through 40 GHz with exceptionally low attenuation. An industry first includes an ergonomically designed, injection molded strain relief and Times’ new, SureGrip™ coupling nut to significantly improve the user’s everyday experience. Clarity is appropriate for use as VNA test port extension, R&D lab, production test and even system interconnect cables.
Times Microwave
www.timesmicrowave.com