advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Industry News

Large-signal Modeling of MESFETs and HEMTs

The LASIMO software that facilitates the development of large-signal models is featured on this month's cover
Optotek Ltd.
No Comments
Large-signal Modeling of MESFETs and HEMTs Optotek Ltd. Kanata, Ontario, Canada Accurate device models are essential for the efficient use of both linear and nonlinear simulation programs. Conventional procedures for extracting MESFET and high electron mobility transistor (HEMT) large-signal models are complex, time consuming and require the use of...
Read More

Miniature Bias Filter Networks with High Isolation from RF to mm-waves

A family of bias filter networks designed to filter unwanted signals from bias and control lines from 10 MHz to 40 GHz
Dielectric Laboratories
No Comments
Miniature Bias Filter Networks with High Isolation from RF to mm-waves Dielectric Laboratories Inc. Cazenovia, NY Today's broadband active components and circuits are particularly susceptible to unwanted RF, microwave and mm-wave signals that appear on the bias, control and supply lines that are necessary for proper circuit operation. As...
Read More

An RFIC Test Systems Contactor with a Long Lifetime and Reduced Parasitics

The YieldPro contactor that combines a long lifetime, a wiping action, respectable compliance range and small size for operation to 18 GHz
Hewlett Packard Co.
No Comments
An RFIC Test Systems Contactor with a Long Lifetime and Reduced Parasitics Hewlett-Packard Co. (HP) Santa Rosa, CA Nestled within the heart of high speed RFIC and MMIC test systems is the contactor (or socket), a tiny component that has importance far greater than its size suggests. As the...
Read More

Computer-aided Design of MMIC Variable Attenuators

The design, fabrication and testing of a 3 to 7 GHz, voltage-controlled MMIC attenuator
Salam Dindo
No Comments
Computer-aided Design of MMIC Variable Attenuators Variable attenuators are used widely in telecommunications and electronic warfare applications to adjust the signal level or compensate for intrinsic gain variations in operating temperature. This article discusses the design, fabrication and testing of a 3 to 7 GHz, voltage-controlled MMIC attenuator and...
Read More

Appendix A: The MMICAD Simulation file

No Comments
Appendix A The MMICAD Simulation file !NONLINEAR MESFET MODEL !OPTOTEK LTD. ! files \mmicad\atten\p2vp47.s2p mescs 101 ! !set up the voltage control variable var vc1=20 ! ckt !*************************************************** !a user defined mesfet nonlinear model !as a function of gate bias !rdist=-.2 + .98vg-.103vgˆ2+.0041VGˆ3 !-6.5E-5VGˆ4 + 3.65E-7VGˆ5 !cdist = .615/(1...
Read More

Beyond the 1GHz Barrier with Thick-Film Ceramic

Using a ceramic multichip module to achieve high frequency performance beyond what is capable in a printed circuit board
Daniel I. Amey, Samuel J. Horwitz, Stephen Sekel, Jeff Powell and Brian Durwood
No Comments
Beyond the 1 GHz Barrier with Thick-film Ceramic Daniel I. Amey and Samuel J. Horowitz DuPont Electronic Materials Research Triangle Park, NC Stephen Sekel Tektronix Inc. Beaverton, OR Jeff Powell and Brian Durwood Maxtek Components Corp. Beaverton, OR Design challenges change at frequencies beyond 1 GHz. Circuits begin to...
Read More

Appendix A: A PCB vs. MCM-c Comparison Matrix

No Comments
Appendix A: A PCB vs. MCM-c Comparison Matrix Problem Description PCB solution MCM-C solution Cost Final design must meet cost targets Reinforced BT epoxy or GETEK can meet high frequency performance requirements, but costs are higher than for conventional FR4 boards, heat sinks and special wire-bondable conductors add to...
Read More

Around the Circuit

No Comments
Around the Circuit INDUSTRY NEWS Microwave multifunction module (MFM) manufacturer REMEC Inc. and microwave component and MFM provider Q-bit Corp. have signed a letter of intent to merge for common stock. The agreement is subject to satisfaction of customary conditions. In related news, REMEC has completed the sale of...
Read More

New Literature

No Comments
New Literature Interconnect Product Brochure This four-page brochure (CompactFlash™ Interconnects for OEMs) describes the company's line of CompactFlash interconnect products for original equipment manufacturers (OEM). Technical drawings and ordering information are provided. Specifications are listed. 3M Electronic Products Division, Austin, TX (800) 328-0016, ext. 114. RF and Microwave Radio...
Read More

COMPONENTS

No Comments
COMPONENTS Broadband, Low Video Transient Switches The models SWN-AKG-1DR-12-HS-LVT and SWN-AKG-1DR-12X-LVT SPST PIN diode switches cover the frequency band of 0.5 to 18 GHz and are available in either reflective or absorptive versions. Isolation is typically 100 dB at 0.5 GHz and 80 dB at 18 GHz. Switching speed...
Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement