advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Articles Tagged with ''testing''

Anritsu Co. introduces LTE FDD Band 22 and LTE TDD Band 42/43 test software for radio com. analyzer

August 8, 2012

Anritsu Co. introduces software options for its MT8820C radio communication analyzer that allows the one-box tester to perform testing of LTE FDD Band 22 and LTE TDD Band 42/43 LTE smartphones and mobile terminals. The extended functionality enhances the capability of the MT8820C, which can be used to test all mobile communications technologies, and allows the inherent cost and time efficiencies associated with the MT8820C to be realized in the development of LTE FDD Band 22 and LTE TDD Band 42/43 LTE phones and devices.


Read More

National Instruments introduces world’s first RF vector signal transceiver

August 7, 2012

National Instruments introduced the world’s first RF vector signal transceiver (VST), the NI PXIe-5644R, and with it, a new class of software-designed instrumentation. This software-centric architecture represents a new era in which engineers and scientists can use LabVIEW to tailor open, field-programmable gate array (FPGA)-based hardware for their specific needs.


Read More

The R&S ESR, world's fastest EMI test receiver, reduces testing times and more reliably detects EMI

TestBench
August 7, 2012

R&S ESR test receiverRohde & Schwarz's new R&S ESR test receiver is available in two different models for frequencies ranging from 10 Hz to 3 GHz or 7 GHz to meet the requirements of all users who perform EMC certification on commercial equipment.


Read More

Gowanda Electronics’ RF inductors receive approval to Level R

August 2, 2012

Gowanda Electronics, a designer and manufacturer of precision electronic components for RF and power applications, announced that the company recently achieved failure rate Level R for its MIL-PRF-39010 RF Inductors – ER10M Series and ER17S Series. These thru-hole series meet the military’s Qualified Product List (QPL) requirements for Established Reliability (ER). Such approval requires extensive testing for electrical, environmental, mechanical and thermal performance


Read More

Agilent provides new application note on voice over LTE

July 31, 2012

The Agilent Power of X application notes provide insight into solving tough measurement problems in a unique way for both the design and manufacturing environments. The new “Solutions for Enabling Fast, Accurate and Efficient Testing of Voice Quality in LTE User Equipment (UE)” 5991-0794EN, available now, offers information into how to best address the long list of test requirements when testing the voice quality of LTE UE with the right VoIP test building blocks.


Read More

Mesuro secures £700k to expand WaveForm Engineering Semiconductor Test solutions

MarketWatch: International
July 31, 2012

Mesuro MB150Mesuro, the Cardiff University spin-out that offers testing and services solutions for the semiconductor industry, announced completion of a £700k funding round to expand its overseas sales and device characterisation capabilities.


Read More

Northrop Grumman G/ATOR system delivered to Wallops Island for government DT

July 30, 2012

Northrop Grumman Corp.'s AN/TPS-80 Ground/Air Task Oriented Radar (G/ATOR) system has been delivered to Surface Combat Systems Center (SCSC) Wallops Island in Eastern Virginia for the government to begin its first and second phases of Developmental Test (DT). The final phase of DT and the Operational Assessment for G/ATOR will be conducted in Yuma, Ariz.


Read More

Pico Technology expands oscilloscopes range

MMICs&More
July 16, 2012

PicoScope340xPico Technology has expanded the PicoScope 3000 Series of high-performance oscilloscopes to include six new 4-channel models that offer a maximum sampling rate of 1 GS/s, a range of input bandwidths from 60 to 200 MHz, and buffer memory depths from 4 to 128 M samples.


Read More

New magnetic field coil from Teseq

July 9, 2012

Teseq has introduced the new INA 703 magnetic field coil that generates fields up to 1200 A/m during magnetic field testing. It is designed for testing to IEC 61000-4-8 (supply frequency magnetic fields), IEC 61000-4-9 (pulsed magnetic fields) and IEC 61000-4-10 (oscillatory magnetic fields) standards. It is suitable for medical equipment, military, avionics, aerospace and industry applications.


Read More

Rohde & Schwarz acquires SwissQual

July 9, 2012

Rohde & Schwarzhas integrated SwissQual, a leading provider of systems for measuring and assessing the quality of service (QoS) in wireless networks, into its group of companies. Through the acquisition Rohde & Schwarz will be in a position to better and more fully address the drive test market with a complete industry-leading technological offering.


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement