advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
Test and Measurement Channel

8-18 GHz High Power Amplifier

January 17, 2011
/ Print / Reprints /
| Share More
/ Text Size+

MITEQNPR-002PhotosmallMITEQ introduces a new addition to its family of broadband high power amplifiers. AMF-2B-08001800-80-40P is a connectorized high power amplifier, covering octave bandwidth from 8 to 18 GHz and delivering approximately 3 W of power and 2.5 W from 6 to 18 GHz. In the band of 10-15 GHz, it delivers about 7W of P1dB.

The SMA connectorized aluminum housing is 21mm (H) x 95mm (L) x 60mm (W). It is intended for bolting to a flat cooling surface or fins. Housing is environmentally sealed, EMI shielded and hermetic sealing option is also available. PA includes reverse voltage protection, in addition to full internal regulation. A TTL-control pin is optional.

Nominal small-signal gain is 50 dB while noise figure is close to 5 dB across the band. Current draw is nominally 4A at P1dB from 12 to 15 VDC of supply. Output IP3 is a minimum of 44 dBm across the full band, closer to 47 dBm from 10–15 GHz.

See more from us in our Buyers Guide directory listing.

Recent Articles by MITEQ Inc.

Post a comment to this article


Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.


advertisment Advertisement