Company Profile
Contact Information:
Title: Corporate Communications
Phone: 508-226-3350
Fax: (508) 226-3317
Email: Click here to see email.
Website: https://www.barryind.com
Location:
Barry Industries Inc.
60 Walton Street
Attleboro MA 02703
United States
Barry Industries introduces an ultra-broadband, DC to 60 GHz chip termination for microwave applications. The uniquely designed TV0404FA-50R0JN-91 has been third-party tested to show a typical return loss of 18.5 dB or better over a DC to 60 GHz bandwidth.
Barry Industries and Modelithics, Inc. have published a report detailing the broadband performance of Barry's 5 mm high temperature co-fired ceramic (HTCC) quad-flat-no-leads (QFN) package to 40 GHz. Barry Industries is an ISO9001:2008 certified ITAR-registered manufacturer of high quality thick film resistors, terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging.
Barry Industries announces the introduction of a RoHS-compliant flange mount RF termination, T50R0-500-15X, which dissipates 500 W with favorable return loss over a DC to 4.5 GHz bandwidth. Barry Industries is an ISO9001:2008 certified ITAR registered manufacturer of high quality thick film resistors,terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging.
Barry Industries introduces a RoHS-compliant flange mount RF termination that dissipates 1000 W with favorable return loss over a DC to 4.5 GHz bandwidth. The thick film on beryllium oxide (BeO) T50R0-1000-6X termination, with its internally matched circuit architecture, has 20 dB or better return loss from DC to 2.5 GHz and 17 dB to 4.5 GHz. The flange and input tab are constructed of robust silver plated copper.
Barry Industries introduces an RoHS compliant flange mount termination which dissipates 800 W with minimal return loss over a DC to 1 GHz bandwidth. The thick film on aluminum nitride (AlN) TA50R0-800-15X termination, with its internally matched circuit architecture, has 25 dB or better return loss from DC to 1 GHz. The four-hole flange and input tab are constructed of robust nickel-plated copper. Overall footprint is 1.9” x 1.04”.
Barry Industries, an ISO9001:2008 certified, ITAR registered manufacturer of high quality thick film resistors, terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging, introduces a new 0904 size chip attenuator for Ku, K and Ka Bands. The AV0904GA attenuator has been characterized to 30 GHz, features gold wirebondable I/O terminals with epoxy mount ground pads and is rated to 750 mW. Typical VSWR is 1.20:1 from DC to 18 GHz and 1.50:1 to 30 GHz.
Barry Industries announces the introduction of an ultra-broadband, DC to 60 GHz chip termination for microwave applications. The TV0404FA-50R0JN-91 is a compact, 0404 (1.016 x 1.016 mm) size chip constructed of robust thick film on alumina with a wire-bondable input pad and epoxy or solderable ground. This 50 ohm impedance device is RoHS/REACH compliant and is rated at 250 mW on a 100°C mounting surface temperature.
Barry Industries and Modelithics, Inc. have published a report detailing the broadband performance of Barry's 5 mm high temperature co-fired ceramic (HTCC) quad-flat-no-leads (QFN) package to 40 GHz. The model features 64 ports for the inner and outer connections of each pin and two model package options depending on the design configuration. The Modelithics model is validated with a comparison to actual measured data.
Barry Industries announces a RoHS-compliant flange mount RF termination, T50R0-500-15X, which dissipates 500 W with return loss over a DC to 4.5 GHz bandwidth. The flange and input tab are constructed of robust silver-plated copper. Overall footprint is 1.25” x 1.00” (31.75 x 25.40 mm). With its 500 W power rating, stable 50 Ω resistor element and 1.33:1 Max VSWR, the T50R0-500-15X is ideal for crucial applications such as Basestation, Broadcast and Phased-Array Radar.Downloads
QFN Package Model
The PKG-BAI-QFN5532-001 is a simulation based equivalent circuit model of Barry Industries P/N QFN-5532-050x molded 5 mm Quad Flat No lead (QFN) surface mount package. Ansys HFSS 3D simulation data was used to create model. Simulation results and model validated against measured data to 40 GHz in multiple measurement environments.
DownloadNon-Magnetic Chip Resistor Selection Guide
Barry Industries, Inc. leading manufacturer of SMT and flange mount passive components, has released their Non-Magnetic Chip Resistor Selection Guide. The main source of ferro-magnetic interference from surface mount components is nickel. Barry Industries offers numerous chip resistors and which are 100% non-magnetic. This Selection Guide features all sizes, terminal configurations and power ratings of Barry's non-magnetic chip resistors.
DownloadHigh Frequency Hermetic HTCC QFN Short Form Brochure
Barry Industries, Inc. leading manufacturer of mission critical ceramic components, has released their new QFN short form brochure. Ceramic QFNs from Barry are broadband, hermetically sealable and are available in sizes 3mm to 8mm. Options include castellations and grounded seal ring. Non-standard sizes and pin counts are possible.
DownloadAttenuators, Resistors & Terminations Short Form Brochure
Barry Industries, Inc. leading manufacturer of SMT and flange mount passive components, has released their new short form brochure. It features an overview of Barry's attenuators, resistors and terminations with chip components sizes 0202 to 5050 in numerous terminal configurations and power ratings and examples of flange mount components with power ratings to 1500W.
Download