PMI Model DTA-2G18G-60-CD-2-OPT-1G18G is a non-reflective, 10 BIT, programmable 60 dB, pin diode attenuator with step resolution as low as 0.06 dB over the frequency range of 1.0 to 18.0 GHz. This model is offered in a slim line housing measuring only 0.5" H.
PMI Model No. PEC2-8G18G-21DBM-LM-SFF is an 8.0 to 18.0 GHz limiting amplifier that provides an nominal output power level of +20.0 dBm for an input power range of -50 to +10 dBm CW. This model has output power level versus frequency range compensation such that the limited output power has a flat frequency response. The unit is supplied in a small housing measuring only 2.98" x 0.78" x 0.36".
PMI Model No. PEC-14-127-8-12-SFF Rev B is a wide band front end amplifier that operates over the frequency range of 1.0 to 26.5 GHz. This model provides gain of 13 to 17 dBm and has a maximum gain flatness of +/-1.5 dB. The maximum noise figure is 5.5 dB from 1.0 to 20.0 GHZ and 6.0 dB from 20.0 to 26.5 GHz. The housing measures 0.83" x 0.75" x 0.36" and is supplied with removable SMA connectors.
PMI Model No. PA-40-17D521D5-5R0-36-12-292FF is a medium power amplifier that operates over the frequency range of 15.7 to 21.5 GHz. It has a nominal gain of 40 dB typical with a maximum gain flatness of +/-1.75 dB and a typical noise figure of 5.0 dB. It is supplied with SMA(F) connectors in a housing that measures 2.6" x 2.0" x 0.5"
PMI Model No. P1T-9D25G-90-T-SFF is a high speed, solid state, single pole single throw switch capable of switching within 20 ns. The frequency range is 9.25 GHz (+/- 30 MHz) with > 90 Db of isolation.
PMI Model No. PE2-15-8G20G-4R0-20-SFF is a 8.0 to 20.0 GHz, low noise amplifier that provides 12 dB min of gain with a typical gain flatness of +/-1.25 dB. The noise figure is 4.0 dB typ and offers an OP1 dB of 20 dBm typ. The operating voltage is +11 to +15 VDC and the current draw is 225 mA nom.
PMI Model No. PE2-30-1R06R0-1R5-22-12-SFF is a 1.0 to 6.0 GHz, low noise amplifier that provides 30 dB of gain typically. The typical noise figure is 1.8 dB and offers an OP1 dB of 22 dBm typ. The operating voltage is +12 to +15 VDC max and the current draw is 320 mA typ.
PMI Model No. PLN-17-110-15-LCA is a 1.0 to 10.0 GHz, low noise amplifier that typically provides 17 dB of gain. The typical noise figure is 2.0 dB and offers an OP1 dB of 13 dBm min. The operating voltage is +12 to +15 VDC and the current draw is 65 mA max.
PMI Model No. PE210R258R515SFFLM Rev. B is a 0.25 to 8.5 GHz, low noise amplifier with a small signal gain window of +9.0 to +13 dB. The noise figure for this unit is <=4.5 dB max (valid from 0.5 to 8.5 GHz) and offers an OP1 dB of +16 dB min. The operating voltage is +12 VDC and the current draw is 300 mA max.