We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
Model SOD-26303230-KF-S1 is a 26 GHz dielectric resonator oscillator (DRO). The oscillator is a free running oscillator with high frequency stability which is achieved by implementing a high quality dielectric resonator. The oscillator exhibits +30 dBm output power and low phase noise of -100 dBc/Hz at 100 KHz offset. The frequency stability of the oscillator is +/- 4 ppm or better in the temperature range of -40 to +85 °C.
AtlanTecRF announces a new series of satellite communications test loop translators for use in X-Band. Operating in X-Band the new range of test loop translators provide direct frequency conversion either from transmit (Tx) to receive (Rx) or from transmit (Tx) to L-band (L) or from L-band (L) to receive (Rx) in the nominal frequency ranges of 7.9 to 8.4 GHz Tx and 7.25 to 7.75 GHz Rx.
PMI Model No. P4T-500M18G-80-T-515-SFF-2W-IND is a single pole, four throw, absorptive switch. This switch offers 80 dB of isolation and a maximum insertion loss of 6.0 dB. It has a maximum switching speed of 200 ns with individual TTL control. The operating power is +33 dBm CW max and the VSWR is 2.0:1 maximum.
Richardson RFPD Inc. announced the availability and full design support capabilities for a new RF switch from M/A-COM Technology Solutions. The MASW-011055 is a high power PIN diode SP2T switch in a common anode configuration, operating from 30 MHz to 3 GHz. It features low insertion loss and excellent linearity and is capable of handling 100 W CW incident power at a base plate temperature of 85ºC.
Richardson RFPD Inc. announced today the availability and full design support capabilities for a new low passive mixer from M/A-COM Technology Solutions. The RF, LO and IF frequency ranges are 5 to 35 GHz, 3 to 33 GHz and DC to 4.5 GHz, respectively. The new mixer can be used for lower sideband (LSB) or upper sideband (USB) mixing, and two mixers can be combined in a quadrature configuration for optimal image rejection.
The PX–571 is a precision crystal oscillator that achieves tight stabilities in low voltage applications over the military temperature range of -55 to 125°C. The product incorporates a 4 point crystal mount making it ideal for ruggedized environmental applications. It features a frequency range of 1 to 125 MHz, it is fully RoHs compliant, has no pure tin in it and is surface-mount/low profile.
Skyworks introduces a step-down, DC-DC converter for automotive, distributed power, industrial, and medical applications. The 28 V, 3 A, non-synchronous SKY87608-11-577LF is also applicable for general purpose, point-of-load, 16, 20, and 28 V voltage regulators. The converter offers prime thermal performance and space savings in addition to addressing the green-power initiative in the non-portable markets.
Richardson RFPD Inc. announced the availability and full design support capabilities for a new UltraCMOS true DC RF switch from Peregrine Semiconductor Corporation. The PE42020 is a HaRP™ technology-enhanced SPDT true DC RF switch that operates from DC up to 8 GHz with integrated RF, analog and digital functions. It can be configured as a 50-ohm absorptive or open reflective switch and offers power handling of +30 dBm at 0 Hz and +36 dBm at 8 GHz.
Richardson RFPD Inc. announced the availability and full design support capabilities for a low noise active mixer from M/A-COM Technology Solutions. The MAMX-011023 is used for down frequency conversion, features an ultra-wideband IF bandwidth of 8 GHz, and has the LO and RF driving the same pin. The mixer can be used for lower sideband (LSB) or upper sideband (USB) mixing.
Morion has announced their new high precision, surface-mount OCXO for SatCom, GPS, network-synchronization and test & measurement applications. The MV272M is presently available at a fixed frequency of 10 MHz. The MV272M has phase noise of -115 dBc/Hz at 1 Hz offset, with short-term stability (ADEV) better than 5 x 10-13 per second.
RSS
Model SOD-26303230-KF-S1 is a 26 GHz dielectric resonator oscillator (DRO). The oscillator is a free running oscillator with high frequency stability which is achieved by implementing a high quality dielectric resonator. The oscillator exhibits +30 dBm output power and low phase noise of -100 dBc/Hz at 100 KHz offset. The frequency stability of the oscillator is +/- 4 ppm or better in the temperature range of -40 to +85 °C.
AtlanTecRF announces a new series of satellite communications test loop translators for use in X-Band. Operating in X-Band the new range of test loop translators provide direct frequency conversion either from transmit (Tx) to receive (Rx) or from transmit (Tx) to L-band (L) or from L-band (L) to receive (Rx) in the nominal frequency ranges of 7.9 to 8.4 GHz Tx and 7.25 to 7.75 GHz Rx.
Richardson RFPD Inc. announced the availability and full design support capabilities for a new RF switch from M/A-COM Technology Solutions. The MASW-011055 is a high power PIN diode SP2T switch in a common anode configuration, operating from 30 MHz to 3 GHz. It features low insertion loss and excellent linearity and is capable of handling 100 W CW incident power at a base plate temperature of 85ºC.
Richardson RFPD Inc. announced today the availability and full design support capabilities for a new low passive mixer from M/A-COM Technology Solutions. The RF, LO and IF frequency ranges are 5 to 35 GHz, 3 to 33 GHz and DC to 4.5 GHz, respectively. The new mixer can be used for lower sideband (LSB) or upper sideband (USB) mixing, and two mixers can be combined in a quadrature configuration for optimal image rejection.
The PX–571 is a precision crystal oscillator that achieves tight stabilities in low voltage applications over the military temperature range of -55 to 125°C. The product incorporates a 4 point crystal mount making it ideal for ruggedized environmental applications. It features a frequency range of 1 to 125 MHz, it is fully RoHs compliant, has no pure tin in it and is surface-mount/low profile.
Skyworks introduces a step-down, DC-DC converter for automotive, distributed power, industrial, and medical applications. The 28 V, 3 A, non-synchronous SKY87608-11-577LF is also applicable for general purpose, point-of-load, 16, 20, and 28 V voltage regulators. The converter offers prime thermal performance and space savings in addition to addressing the green-power initiative in the non-portable markets.
Richardson RFPD Inc. announced the availability and full design support capabilities for a new UltraCMOS true DC RF switch from Peregrine Semiconductor Corporation. The PE42020 is a HaRP™ technology-enhanced SPDT true DC RF switch that operates from DC up to 8 GHz with integrated RF, analog and digital functions. It can be configured as a 50-ohm absorptive or open reflective switch and offers power handling of +30 dBm at 0 Hz and +36 dBm at 8 GHz.
Richardson RFPD Inc. announced the availability and full design support capabilities for a low noise active mixer from M/A-COM Technology Solutions. The MAMX-011023 is used for down frequency conversion, features an ultra-wideband IF bandwidth of 8 GHz, and has the LO and RF driving the same pin. The mixer can be used for lower sideband (LSB) or upper sideband (USB) mixing.
Morion has announced their new high precision, surface-mount OCXO for SatCom, GPS, network-synchronization and test & measurement applications. The MV272M is presently available at a fixed frequency of 10 MHz. The MV272M has phase noise of -115 dBc/Hz at 1 Hz offset, with short-term stability (ADEV) better than 5 x 10-13 per second.