Industry News

The Book End

RF and Microwave Semiconductor Device Handbook Mike Golio, Editor-in-Chief CRC Press 311 pages; $99.95 ISBN: 0-8493-1562-X The aim of this book is to provide a single volume comprehensive reference for high frequency semiconductor devices. Written by twenty experts in their field, it is intended to be a starting point...
Read More

The Grid Amplifier: Enabling High Power Millimeter-wave Systems

There are a number of communications, radar and imaging applications spanning Ka-band through W-band (26 to 110 GHz) that require transmitter output powers in the range of a few watts to a few tens of watts. Vacuum-tube sources and amplifiers have long been available that can produce output power...
Read More

An Actively-controlled Microwave Reflecting Surface with Binary-pattern Modulation

This article describes an actively-controlled reflecting surface, capable of modulating the microwave energy incident upon it. The surface is a composite structure holding an array of conventional semiconductor diodes excited with a set of pulses in a ...
For specific applications, there is a need for materials or composite structures which can reflect and/or absorb the electromagnetic (EM) energy incident upon them in a desired or controllable fashion. Such reflective EM absorbing/reflecting materials 1-3 are useful in designing smart radar cross-section (smart RCS) surfaces and radio frequency...
Read More

2003 Editorial Index

ANTENNAS Everett, Carl L . "Using Guided Wavelength as a Basis for the Design of Dielectric Rod Antennas," No. 5, p. 222. Haupt, Randy "Generating a Plane Wave in the Near Field with a Planar Array Antenna," No. 9, p. 152. Jang, Yong-Woong and Ho-Sub Shin "A Wideband and...
Read More

Flash in the Plan

Directed-energy weapons remain more experimental than available.
The detonation by the United States of a nuclear warhead 30,000 feet above Johnston Atoll in July 1962 lit up the night sky above the Hawaiian Islands, 800 miles away. It also created a power surge that shut down the streetlights and phone system of Oahu as well as...
Read More

A Brief Exposure to Ultra-wideband Signaling

Ultra-wideband (UWB) techniques are based on the generation of extremely short digital pulses in the sub-nanosecond range (1 to 1000 picoseconds). The technology is vastly different from classical radio transmission. The extremely short pulses are gene...
Baseband pulses are video or carrier-less pulses of very short duration. Their spectral content is concentrated primarily from zero frequency through the microwave region of the spectrum. This tutorial attempts to describe some of the vagaries of these pulses and their use in ground penetration radars and communications. Figure...
Read More

Cavity Techniques for Substrate Properties at Microwave/Millimeter-wave Bands

For quality control in the design of microwave and millimeter-wave circuitry and devices, it is important to have a good measure of the dielectric properties of the materials employed. The standards and methods that are often employed for this purpose ...
The setups presented are essentially of two types - thin dielectric sheet testers and z-axis testers. These are the tools that are employed to independently measure the components of the substrate dielectric constant. It is supposed that suitable propagation models may use this information to better predict propagation mode...
Read More