Amplifiers and Oscillators

RSS

Norden Millimeter is pleased to announce that our power amplifiers (N16-5631) and lownoise amplifiers (N16-5619) have been chosen to be included on Keysight’s 5G Application Note 5992-1326EN.  The N16-5631 and N16-5619 provide wide band frequency operation from 18 GHz to 44 GHz. 

RFMW Ltd. announces design and sales support for a DOCSIS 3.1 compliant return path amplifier. The Qorvo QPB3321 is an HBT, single-ended, RF amplifier IC operating from 5 to 210 MHz. Designed to provide a low noise, high gain option, it uses an 8 V power supply to provide lower overall power dissipation.

Empower RF announced the release of a single band solid state GaN system amplifier, capable of delivering a minimum 150 W across its entire .6 to 6 Ghz band.

RFMW Ltd. announces design and sales support for an integrated Edge QAM amplifier module from Qorvo. The RFAM3620 employs GaAs pHEMT die, GaAs MESFET die, a 20 dB range variable attenuator and a power enable feature.

AR offers world class solid state power amplifiers designed for various EW application over the 1 to 18 GHz frequency band. You can have chip & wire hybrid modules from .7 to 6 GHz to 50 W or benchtops designs up to 500 W CW.

PMI Model No. SDLVA-500M4G-CD-2 is a successive detection log video amplifier (SDLVA) that offers a typical RF gain of 55 dB. This model has a log slope of 25 mV/dB typical into a 50 Ohm load with input power handling of +17 dBm CW maximum.

Anokiwave is redefining traditional single function gain blocks with its new family of multi-function microwave and mmWave silicon ICs, offering complete transmit/receive functionality with active gain and phase control.

IGNP1214M1KW-GPS is a single-supply 50-Ohm matched GaN-based pulsed power pallet amplifier for L-Band radar systems, operating in the 1.20 to 1.40 GHz instantaneous frequency band. The pallet amplifier supplies a minimum of 1000 W of peak pulsed output power. 

IGNP0912L1KW is a 50-Ohm matched GaN-based high power pulsed pallet amplifier for L- Band avionics systems operating over the instantaneous bandwidth of 0.960 to 1.215 GHz. This pallet amplifier supplies a minimum of 1000W of peak pulse power.

RFMW Ltd.'s QPC9314 PIN-diode based switch can handle 52 W of average power with an LTE signal (8 dB PAR) and contains two LNA stages, and a 1-bit DSA to provide a high and low gain mode.