Remcom
XFdtd®3D EM Simulation Software
XFdtd®3D EM simulation software features a new schematic editor and frequency-domain circuit solver, enabling advanced antenna matching network and corporate feed network analyses, including multi-state and multi-port devices. Various use cases that the schematic editor supports include simple pi or T matching networks, multi-state and multi-port aperture or impedance tuners and corporate feed networks with digital phase shifters. With the ability to connect to multiple full-wave simulations, XFdtd reveals operating modes for different frequency bands and physical configurations.
Rigol
Digital Oscilloscope
RIGOL’s most powerful oscilloscope ever—StationMax DS70000 is available in 3 or 5 GHz bandwidths, four channels, 20 GSa/sec sampling, 1 million wfms/sec, 2 Gpts memory depth and high-resolution measurements to 16 bits. DS70000 provides outstanding performance, speed and analysis with a completely new interface designed for the 15.6” multi-touch display. Powerful analysis capabilities include real-time spectrum analysis, EMI debugging and multi-domain analysis, eye diagram and jitter analysis.
Sanan-IC
The H20HP12 Process
Sanan-IC has released its latest GaAs HBT technology called the H20HP12 process which meets high linearity requirements in wireless communication applications such as 5G NR HPUE. Excellent PA performance can be obtained together with outstanding harmonic suppression and higher delivered linear power. Its epitaxial structure, developed and manufactured in-house, exhibits lower VCE (offset) and lower Vknee on its I-V curve.
Spacek Labs
Ka-Band Power Amplifier
This compact high-power amplifier, SP352-25 to 38 W, is designed for use from 32 to 38 GHz. 100 nSec switching speed is controlled using TTL. Saturated output power is 6 to 7 W typical, ideally suited for communication and radar applications. Nominal gain is 35 dB with VSWR less than 2:1 at both ports. Bias voltage is +8 VDC with 4.5A quiescent current, 8A at saturated output. Switching speed shown; 100 nSec includes propagation delay of trigger cabling. (Blue = trigger, yellow = detected output power).
Special Hermetic Products Inc.
Hermetic Seals
Special Hermetic Products Inc. (SHP) products set you on the path to ZERO failures. SHP is unmatched in its breadth of standard products and application knowledge in the hermetic packaging area. Since the company designs and manufactures every type of glass sealed product and the packages in which they are used, as well as direct-glassed packages in various materials, SHP is in the unique position of offering essentially all possible solutions.
Spectrum Instrumentation GmbH
Next-Generation PCIe Digitizers
Two new digitizer cards from Spectrum Instrumentation raise the standard of PC-based instrumentation performance. The cards are capable of streaming acquired data over the PCIe bus at an impressive 12.8 GB/s—nearly 2x as fast as any other PCIe digitizer currently on the market. It means they can continuously run at their maximum sampling rate of 6.4 GS/s, with 12-bit resolution, streaming this massive data to CPUs or CUDA GPUs for real-time processing.
www.spectrum-instrumentation.com
Synergy Microwave Corp.
Bi-Directional Couplers
Explore the specifications of Synergy’s SBCHP, SCCHP and SDCHP surface-mount, high directivity, bi-directional couplers. These are an asset for monitoring power on antenna ports or sampling power in feed-forward amplifiers. These cover the combined frequency range between 10 to 820 MHz, with coupling values of 11, 15, 18 and 20 dB and with input power ratings of 25 to 100 W, depending on the model. Available in package sizes of 0.375 × 0.5 × 0.275 in. and 0.94 × 0.94 × 0.4 in.
Taiyo Yuden USA Inc.
High Q Capacitors
TAIYO YUDEN’s High Q capacitors, MSAR and MBAR series, provide an excellent performance of low dielectric loss, low-power dissipation and better efficiency compared with standard MLCCs. They have copper inner electrodes, which realize superior Q factor with low ESR. Remarkably, the company’s High Q MLCC lineup is designed for RF module applications: MSAR series is the best suited for mobile communication devices including smartphones and tablets, MBAR series is ideal for high reliability RF market, including base stations, telecommunication networks and more.
Tamagawa Electronics
Up-/Down-Converter Module
Tamagawa Electronics has developed a multi-channel mmWave up- and down-converter module for prototyping and testing 5G beamforming. The MMCX module covers 27.5 to 28.5 GHz with 1 GHz instantaneous bandwidth and an IF frequency of 3 GHz. It interfaces with up to 32 antennas. Both analog and digital beamforming are used to create the beams, and both can be used simultaneously. The analog beamforming module controls from four to 32 systems, and the digital beamforming module supports up to eight.
TotalTemp Technologies
Thermal Platforms and Chambers
TotalTemp offers new products and features to elevate your testing. Its thermal platforms and chambers always help you get the job done efficiently. And now: cloud storage technology. Circle-chart recorders and manual plots are history, your test results can be most effectively reported, stored, emailed PDF or sent to network printers or the Synergy Server. Plus, space simulation chambers. The advantages of thermal platforms are a natural fit for conductive heat transfer testing in high vacuum applications. 70°C to +175°C, 1×10-6 Torr.
Wenteq Microwave
Low Noise Amplifier
Model ABL1800-01-3330DP is a SMA connectorized low noise amplifier offering 33 dB linear gain and 3 dB typical noise figure over the frequency range from 0.1 to 18 GHz with input over drive protection. The amplifier requires a single DC power supply and can operate from +12 V. The package size of the amplifier is 1.5 × 1.0 × 0.4 in.
Wilson Electronics
Network 257
Extend and strengthen high band 5G coverage outside with WilsonPro’s innovative Network 257. Using dielectric waveguide antennas to efficiently optimize mmWave 5G, Network 257 supports donor or service beamwidths, from 8 to 45 degrees. This flexibility allows for the dual-polarized units to maximize non-line-of-sight coverage, eliminate coverage gaps and redirect 5G on the edge of service. The ideal repeater for amplifying mmWave, the Network 257 is cost-effective, efficient and rapid-to-deploy.
Wright Technologies
1 to 20 GHz Series Amplifiers
The newly released ASL20B series amplifiers feature extended frequency operation. The ASL20B series products consist of gain blocks with +20, +30 and +40 dB. The noise figure levels are +2 dB typical and +2.7 dB maximum out to 20 GHz. The output P-1dB is +21 dBm typical and +18 dBm minimum 1 to 20 GHz. Like all WT products the ASL20B series amplifiers are battle tested and backed with the four-year warranty program. This type of service can give customers the support they need for long term uses reducing costly replacements. All WT products are RoHS compliant and burn-in tested for 48 hours at +50°C.
Würth Elektronik
Proteus-III-SPI
Würth Elektronik presents the Bluetooth low energy 5.1 module Proteus-III-SPI. The module, measuring only 8 × 12 × 2 mm, with a payload of up to 964 bytes, integrated antenna, encryption technology and six configurable IO pins, is based on the Nordic Semiconductor nRF52840 chipset. It can be used for IoT and M2M applications, for example, to build radio-based maintenance interfaces and sensor networks. The WE-ProWare firmware from Würth Elektronik, which has been industrial proven over many years, makes the module extremely versatile.