Fairview Microwave
Fixed Waveguide Attenuators
Fairview Microwave now offers waveguide fixed attenuators that consist of 30 models with operating frequency range up to 110 GHz. These products are available in waveguide sizes from WR-10 to WR-28 with UG style cover flanges. They offer excellent RF performances to meet diverse application requirements. All of Fairview’s products are available in-stock and same-day shipping.
GeoSync Microwave Inc.
C-Band LNA Series
A C-Band LNA incorporating a high rejection filter blocking 5G signals is now available from GeoSync Microwave. The series of five models offers the flexibility to choose either the full 3.4 to 4.8 GHz range as the passband or four other models with narrower passbands, such as 3.7 to 4.2 GHz. Sharp rejection of -65 dB at 100 MHz off the edge of the passband is nominal for all models.
Impulse Technologies
Lens Horn Antenna
Anteral’s Lens Horn Antennas are conical horn antennas with a plano-convex Teflon (PTFE) lens added in the aperture, in order to apply phase correction and achieve superior performance with minimum size. They are designed to cover the frequency range of 8 to 170 GHz in 11 bands with 30 dB nominal mid-band gain. Anteral optimizes all designs to show not only high gain, but also low VSWR (< 1.3) and low side lobes. Custom bands and gain values can be requested.
Information Systems Laboratories
Virtual RF HIL Flight Testing
ISL’s real-time hardware-in-the-loop (HIL) RTEMES® system enables for the first time, virtual flight testing of advanced RF systems for radar, ELINT and EW applications. It supports multi-channel RF systems from VHF to Ku-Band and is based on a cost-effective digital COTS transceiver/FPGA architecture. RTEMES® is designed to seamlessly integrate with ISL’s RFView® RF digital engineering tools including high-fidelity, physics-based modeling and simulation. As such, far more extensive and stressful testing can be performed on the actual flight hardware than what is possible in traditional range testing.
INGUN
Test Probes, Test Fixture Kits and Accessories
INGUN is a worldwide leading manufacturer of test probes, test fixture kits and accessories for the quality assurance of electrical and electronic products.
Knowles
RF Filtering
The Knowles DLI brand continues to expand its RF Filtering options with newly acquired lumped element and ceramic resonator filters to go alongside its SMD high frequency microstrip filters. The company’s filters offer stable performance over a wide temperature range, -55°C to 125°C, and are rigorously tested to ensure the highest standards. Whether you’re changing to higher frequencies or looking to reduce footprint and weight, Knowles has a solution!
MCV Microwave
Exact Shape Ceramic Filters
MCV Microwave, a leader in high Q dielectric resonator, substrate and filter, is offering high performance exact shape ceramic filters to space, aerospace, defense and military industries. These bandpass filters maintain exact shape with matched delay over a wide frequency range in the same footprint. A typical filter exhibits low passband insertion loss, exact 6 dBc bandwidth of < 100 MHz and 60 dBc bandwidth of < 250 MHz from 650 MHz to 1250 MHz in a low profile package of 0.55 × 0.4 × 0.118 in. MCV also offers a series of band reject filters from UHF to GPS frequency.
M Wave Design
C-Band Isolator
The 187IR1203 is a C-Band isolator rated at 320 kW peak and a 320 kW average designed to protect high-power tube amplifiers.
Narda Safety Test Solutions
SignalShark
Narda Safety Test Solutions extends the spectrum of applications for its SignalShark with functions for broadband mobile signal monitoring and real-time analysis. Therefore, Narda collaborates with PROCITEC, the specialist for software-based signal processing. The aim was a perfect measurement system for land, sea and air-based wireless communication systems. The combination of the robust yet highly sensitive real-time receiver, and the go2MONITOR software defines state-of-the-art in mobile automatic radio signal monitoring and evaluation units.
OEwaves
Phase Noise Analyzer
OEwaves OE8000W HI-Q® W-Band phase noise analyzer offers ultra-low phase noise floor < -150 dBc/Hz extending across 40 to 110 GHz frequency range. This homodyne-based system is unique in wide mmWave band measurement without requiring another low noise reference source or external mixer, as required in conventional approaches. The system operates with ease, speed and precision using a simple graphic user interface via a notebook PC. The OE8000W features cross-correlation, residual phase noise and AM noise measurement among other upgrades and options.
OML
Portable Compact Signal Generator Module
OML introduces the new SxxMPS Series compact version of its mmWave frequency extender for signal generators. The new, compact S12MPS multiplier signal generator covering 60 to 90 GHz is only 2.12 (L) × 1.64 (H) × 3.72 (W) in. and can be powered via USB 2.0 power port. This innovative small compact design module is targeted for portable field applications and is fully compatible with Keysight FieldFox analyzers. Contact OML for more details.
Pulse Genex
Pulse Generator
Pulse Genex announces its new mid-cost range pulse generator. Its engineers were tired of the over-complicated user interfaces on other pulse generators so Pulse Genex came up with the Bulldog. It is designed for ease of use and offers four-channel output, ModBus communication and user-defined fault limits to protect your equipment. It generates pulses with programmable relative timing and is capable of remote operation with a provided graphic user interface. The Bulldog is available in both benchtop and rackmount models.