Microwave Products Group
Thin Film Filters
Microwave Products Group offers a full range of thin film filters covering a frequency range of 2 to 30 GHz, 2 to 40 percent relative bandwidth and 1.5:1 VSWR. These products feature an extremely small footprint and low profile delivering the best size to performance ratio combination. These filters are available as bandpass, lowpass, highpass, notch (band reject), tunable and multiplexers technologies and are ideally suited for phased array radars, communication links, ESM receiver, UAVs and military communication equipment. Visit us at IMS at booth 6029.
Millibox
Three-Axis mmWave/THz Antenna Positioner
Modular in size, GIM05 possesses a resolution down to 0.001-degree and an unprecedented 285-degree field-of-view, where the DUT as big as 15” diagonal (38 cm) is unobstructed by the positioner chassis itself. This allows for very efficient and precise radiation pattern captures and OTA characterization, especially for mmWave radar tests. GIM05 connects to USB with a Python controller delivered in source for painless instrument integration.
Morion
Miniature Rubidium Clocks
Morion’s RFS-M102 is a 10 MHz rubidium atomic clock having daily aging of ±4E-12 and annual aging of ±5E-10; ADEV is < 5E-11 at 1 sec, < 2E-11 at 10 sec and < 8E-12 at 100 sec. The unit measures 51 × 51 × 25 mm and operates from +12 V. The RFS-M120 has excellent temperature stability of <±1E-10 (-40°C to +80°C) and is available in SIN or LVCMOS output. Retrace (24h ON → 6h OFF → 2h ON) is < ±5E-11.
Mini-Circuits
USB-Connected VNA
Mini-Circuits’ model eVNA-63+ is a two-port VNA with frequency range of 300 kHz to 6 GHz. With test-port power from -50 to +10 dBm and low trace noise of typically 0.005 dB RMS, the VNA achieves a dynamic range of typically 132 dB. It has Type-N female signal connectors and integrated bias tees for active-device measurements. The VNA operates under USB-connected computer control with included GUI and API software, features electronic calibration and performs time-domain analysis.
Coaxial Amp
Mini-Circuits’ model ZHL-2425-250+ SSPA capable of 300 W (+54.8 dBm) typical CW or pulsed output power across the ISM band from 2.4 to 2.5 GHz. It provides 42 dB typical gain with 60 percent typical power-added efficiency (PAE) but measures just 6.750 × 2.20 × 0.80 in. (171.450 × 55.880 × 20.320 mm) with MCX input and N-type output connectors. The rugged 50 Ω amplifier has simple TTL control and draws 16 A at 32 VDC.
Coaxial Amplifier
ZVA-71863HP+ is a high-gain coaxial amplifier with 38 dB typical gain and +24 dBm typical saturated output power from 71 to 86 GHz. It runs on a single supply voltage, from +10 to +15 VDC, drawing 490 mA at +10 VDC. Well suited for 5G networks, automotive radar, satcom and mmWave test systems, the amplifier has internal circuitry to protect against damage from DC over-voltage and reverse voltage. It is equipped with 1.0 mm female coaxial connectors.
Frequency Extender
Mini-Circuits’ model FX-30G-RC is a frequency extender with buffer amplifier that provides output signals from 10 MHz to 30 GHz at levels to +20 dBm with ±1 dB output power accuracy. It forms a seamless interface with the 15 GHz model SSG-15G-RC signal generator, boosting its frequency range to 30 GHz while maintaining low harmonics of -40 dBc and spurious content of -70 dBc. It is simply controlled by Ethernet or USB connection to an external computer running FX software.
Smart Sensor Reads
Mini-Circuits’ model PWR-40PW-RC is an advanced power sensor that can measure peak and average power from -20 to +20 dBm across frequencies from 500 MHz to 40 GHz. Its 10 MHz modulation bandwidth and 20 million samples/s sampling rate aid power measurements of complex modulation formats while a 30 MHz video bandwidth enables power measurements of automatic level control (ALC) circuits. The power sensor, which includes full software support, connects to an external computer via Ethernet or USB port.
Networks International Corp.
Thin Film Filters
NIC’s engineering expertise includes a specialty in thin film filters that span from 1 GHz to 26 GHz. They offer a compact package size with low profile of < 0.08 inches. The filters also offer high selectivity and out of band rejection of > 60 dB. Whether your challenge is a small form factor, high-power, tough electrical specifications or cost, NIC’s unique products showcase a variety of creative solutions for all of your radar and communications needs. Please stop by IMS booth #7014 for additional information.
Norden Millimeter
Custom Transceivers
Norden designs custom transceivers for military and commercial applications including airborne, UAV and EW. They have “catalog” models which provide wideband RF and up to 1.5 GHz IF with low phase noise. Norden can provide custom designs which incorporate temperature compensation, variable gain and meet military environmental requirements. Norden also offers models in a low SWaP 3U VPX module which includes a built-in LO. Norden engineers utilize proven designs to provide low risk, cost-effective solutions.
Nxbeam Inc.
Ka-Band 25 W Power Amplifier
Nxbeam’s NPA2003-FL is a GaN Ka-Band high power amplifier in a high performance leaded flange package. The part operates from 27 to 31 GHz and provides an average of 25 W saturated output power, 15 W of linear power, 25 percent PAE and 23 dB of linear gain. The amplifier consists of three independently biased gain stages provided flexibility to tailor linear power performance to specific application needs.
Orolia
Miniaturized Rubidium Oscillator
The mRO-50 is the latest breakthrough low SWaP-C Miniaturized Rubidium Oscillator designed by Orolia to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one-day holdover below 1 µs and a retrace below 1 × 10-10 in a form factor (50.8 × 50.8 × 19.5 mm) that takes up only 51 cc of volume and consumes only 0.45 W of power, or about 10x less than existing solutions with similar capabilities.
Pasternack
5G RF Components
Pasternack offers a large selection of antennas that operate in the sub-6 GHz and mmWave frequency bands for 5G telecom and wireless applications. These 5G cellular waveguide antennas include standard gain horns, conical horns, scalar feed horns, lens horns and omni-directional antennas with waveguide flanges. These high-quality 5G waveguide antennas are in stock and ready to ship today.
Pickering Interfaces
Microwave Multiplexers
Pickering Interfaces, the leading supplier of signal switching and simulation solutions for electronic test and verification, showcases its range of microwave multiplexers with a maximum frequency of 67 GHz in SP4T and SP6T form factors. The higher frequency PXI/PXIe multiplexers (model 4x-785C) and LXI multiplexers (models 60-800 and 60-803) maintain the same physical dimensions as existing lower frequency products, enabling users to upgrade to 67 GHz products while maintaining the same slot count/rack height test systems.
Piconics Inc.
Pure Gold Conical Inductors
Piconics Inc. introduces a new line of broadband conical inductors utilizing 99.9 percent pure gold wire. The Pure Gold Broadband Conical Inductors series offers enhanced reliability when bonding to delicate metallization structures while maintaining the same performance as traditional copper wire conical inductors. By utilizing pure gold wire, designers avoid the oxidation, corrosion and hardness issues commonly associated with copper wire bonds. Typical applications include bias tees, broadband amplifiers, high speed switches. Samples are currently available.
Pixus Technologies
OpenVPX & SOSA Aligned Chassis Platforms
With expertise in 100 GbE+ high speed designs, Pixus is the premier solution for VITA 66/67 OpenVPX and SOSA aligned solutions. Our enclosures are renowned for superior cooling and design quality. With a vast array of COTS OpenVPX backplane profiles and MIL rugged enclosures, Pixus can help you get started.
PPG Cuming Microwave Corp.
Engineered Solutions for Telecom and 5G Applications
Engineered solutions for telecom and 5G applications, including noise suppression, resonance elimination, passive intermodulation problems and antenna side lobe suppression; elastomeric, foam and castable microwave absorbers, standard and custom solutions available. Ask about our new C-SHIELD 685, a PIM reduction paint for cell sites, rooftops and indoor systems. Provides shielding from RF test facilities, labs or wherever protection against RF energy is required. Visit us at booth #10044.
PPI Systems Inc.
RapiTrim™
PPI continues to expand the range of advanced fixturing and probing solutions for its laser resistor trimmers. The RapiTrim™ family of products covers all trimming requirements from thick film to thin film to semiconductor wafers. PPI offers turnkey solutions for all trimming needs, from standard component and circuit trim to complex active-trim scenarios with custom fixturing. Manual loading, internal stack loader, magazine loading or custom automation are all available. RapiTrim products are The Future of Resistor Trimming™.
Qorvo
2-Stage Power Amplifier Module
The QPA3908 is an integrated 2-stage power amplifier module designed for massive MIMO applications with 8 W RMS at the device output covering frequency range from 3.7 to 3.98 GHz. The module is 50 Ω input and output and requires minimal external components. The module is also compact and offers a much smaller footprint than traditional discrete component solutions. The QPA3908 incorporates a driver and Doherty final stage delivering high power-added efficiency for the entire module at 8 W average power.
Quantic PMI
mmWave Products up to 65 GHz
Quantic PMI has expanded their product offering with a variety of new LNAs, digitally-controlled attenuators, high power limiters, solid-state switches (SPST to SP16T) that operate up to 65 GHz for 5G and mmWave mission-critical applications. Select from standard designs or custom products can be designed to meet your most demanding electrical, mechanical and environmental specifications. Visit us at booth #8080.
Quarterwave
3U Rack-Mountable Amplifiers
The new 9103 series is offered as 3U rack-mountable amplifiers, with standard models providing frequency coverage of 2 to 8 GHz and 6.5 to 18 GHz, with output power ratings of 300 W CW or 1.5 to 2 kW pulsed. All of Quarterwave’s amplifiers feature low noise, high PRF, optional touch screen interface and are fully customizable. Other models of amplifiers are capable of covering 0.8 to 40 GHz, with an output rating of up to 50 kW.
Reactel Incorporated
Filters, Multiplexers and Multifunction Assemblies
Celebrating its 43rd Anniversary, Reactel will feature its full line of filters, multiplexers and multifunction assemblies covering up to 67 GHz at IMS2022. From small, lightweight units suitable for flight or portable systems to high-power units capable of handling up to 25 kW, connectorized or surface-mount, large or small quantities—our talented engineers can design a unit specifically for your application and deliver quickly. Visit us in booth 9006 to discuss your requirements and visit with our engineering team.
RelComm Technologies Inc.
Coaxial Relays
RelComm Technologies, Inc. introduces coaxial relays to 40 GHz configured with 2.9 mm connectors providing excellent RF performance which are well suited for 5G and other high frequency applications. Pictured here is our miniature transfer switch that measures 1-inch wide x 1.5 inches tall. The relay is RoHS compliant. It is available in failsafe or latching configurations with 12 and 24 V DC operation. Options include auxiliary position indicators, splash proof sealed and TTL controlled input.
Renesas
Phased Array Beamforming ICs
Renesas beamforming ICs enable cost-effective, next-generation system solutions for 5G, satcom and radar applications. Each IC contains multiple independently controlled active channels for element-level beam pattern shaping in ESAs. The compact devices are available in planar BGA or QFN packages to realize very low profile and small form factor phased array antennas with λ/2 element spacing. Tx, Rx or TRx variants are shipping now and cover all of the common 5G and satcom frequency bands.
RF-Lambda
300 W, 6 to 18 GHz, EMC Power Amplifier
RF-Lambda’s EMC/AC powered rack-mount amplifiers offer UWB operation up to 100 GHz and 2 kW of output power. This 300 W, 6 to 18 GHz EMC power amplifier provides 90 dB of gain and a typical Psat of 55 dBm. Features include a large, easy to read LCD screen and a digital control attenuator offering 31.5 dB attenuation range with an 0.5 dB step size. Applications range from military/aerospace, test and measurement and 5G wireless communications.
400 W, 2 to 6 GHz, EMC Power Amplifier
RF-Lambda EMC/AC powered rack-mount amplifiers offer UWB operation up to 100 GHz and 2 kW of output power. This 400 W, 2 to 6 GHz, EMC power amplifier is loaded with features such as temperature compensation, auto calibration, as well as over current, over temperature and input overdrive protection. The unit also supports ethernet control and monitoring. Applications range from military/aerospace, test and measurement and 5G wireless communications.
Q-/V-/W-Band AC RF Amplifier
RF-Lambda EMC/AC powered rack-mount amplifiers offer UWB operation up to 100 GHz and 2 kW of output power. This Q-/V-/W-Band AC RF amplifier is loaded with features such as a wide frequency range from 71 to 76 GHz, gain of 21.5 dB with a flatness of ±1.5 dB. The output power is 20 dBm typical. Applications range from military/aerospace, test and measurement and 5G wireless communications.
AC Low Noise Amplifier
RF-Lambda’s EMC/AC powered rack-mount amplifiers offer UWB operation up to 100 GHz and 2 kW of output power. This AC LNA covers 84 to 100 GHz, with gain of 16 dB and an output power of 1 dBm typical. Applications range from military/aerospace, test and measurement and 5G wireless communications.