Fully Integrated Tuner Module
The AM9018 is a fully integrated tuner module that provides high dynamic range coverage from 0.9 to 18 GHz with an instantaneous bandwidth of 1 GHz. The tuner also provides a bypass path from 10 MHz to 6 GHz for direct spectrum capture, and an internal ADC driver amplifier. This miniature heterodyne tuner module is designed for high performance and low size, weight and power and is mechanically mountable to a host circuit board for use in multi-channel receiver applications.
Atlanta Micro Inc.
High Frequency RF Loads
Fairview Microwave announces new high frequency RF loads: New RF loads with 1.85 mm, 2.4 mm, 3.5 mm, SMP and SMPM connector. High frequency RF terminations. Operating frequency range up to 67 GHz, coaxial designs with 1.85 mm, 2.4 mm, 3.5 mm, SMP and Mini-SMP connectors, available in both male/female connectorized configurations, flat RF response and performance, excellent VSWR performance as low as 1.15:1.
After a 15-year hiatus, OhmWeve is back. The high voltage, high-power resistors that pulsed power specialists standardized on is available once again. Ideal for high wattage pulsed power applications, OhmWeve resistors are the lowest weight per Watt resistors on the market. They are available in racks of five, 10 or as individual resistors. Their unique woven design eliminates the need for costly heat sinks or oil tanks.
H6 Systems Inc.
Ultra-Wideband 10 dB Directional Coupler
MIcable 0.2 to 18 GHz ultra-wideband 10 dB directional coupler covers multiple microwave frequency bands such as P, L, S, C, X, Ku, K and Ka by a single unit. It has excellent performance with insertion loss 2.4 dB, VSWR 1.4:1, coupling 10 ± 1 dB, directivity 13 dB and 30 W power handling. It is good for applications like test, instrument and other wideband systems.
Fujian MIcable Electronic Technology Group Co. Ltd.
KRYTAR Inc. announced the continued expansion of its line of directional couplers with the addition of a new model offering 13 dB of nominal coupling over the frequency range of 18 to 26.5 GHz (K-Band), in a compact and lightweight package. KRYTAR’s new directional coupler, Model 262213, enhances the selection of multi-purpose, stripline designs that exhibit excellent coupling in a single, compact and lightweight package. The directional coupler is uniquely designed for systems applications where external leveling, precise monitoring, signal mixing or swept transmission and reflection measurements are required.
5 to 300 MHz Transformer
The MXRFXF0014 is 5 to 300 MHz 1:1 high performance, flux coupled SMD transformer with 20 dB minimum input RL minimum across the band and less than
±0.2 dB amplitude balance and excellent
± degree phase balance across both primary and secondary outputs. Add in built-in temperature stability and an active device biasing tap; enabling smaller component count and more board real estate for the best system performance when you need it. Contact the MiniRF local sales office at 408-228-3533 or RFMW Inc. for samples and design with confidence.
High Frequency Catalog
Passive Plus, Inc. (PPI) has launched a brand-new catalog for its high frequency components: broadband capacitors, broadband resistors, inductors and single layer capacitors. The catalog can be found on PPI’s website. The new catalog represents PPI’s high frequency products. The full range of broadband capacitors: 01005, 0201, 0402, 0603, 0805; broadband resistors: R35-1209 and R35-2010; spiral inductors; and single layer capacitors: edge to edge, border cap, twin cap and array. Individual component information can also be found on the website.
Passive Plus Inc.
Coaxial Packaged Switches
Pasternack, an Infinite Electronics brand and a leading provider of RF, microwave and mmWave products, has just launched a new series of high-power RF and microwave PIN diode coaxial packaged switches that are ideal for commercial and military radar, jamming systems, medical imaging, communications and electronic warfare. Pasternack’s new high-power RF and microwave PIN diode switches utilize GaN semiconductor technology. GaN and chip and wire technology in the manufacturing process ensures state-of-the-art power performance with excellent power-to-volume ratio that is ideal for broadband high-power applications.