Qorvo
Ultra-Low Noise Amplifier
The QPL9058 is a high linearity, ultra-low noise amplifier in a small 2 × 2 mm surface-mount package. At 3.6 GHz, the amplifier typically provides 18 dB gain, +36 dBm OIP3 at a 55 mA bias setting and 0.6 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5 V. The device is housed in a green/RoHS compliant industry-standard 2 × 2 mm package. The QPL9058 is bias adjustable and requires minimal external components to operate.
RelComm Technologies Inc.
1P4T Coaxial Relay
RelComm Technologies, Inc. introduces 1P4T coaxial relay configured with ‘7-16 DIN’ type connectors providing excellent RF performance to 3 GHz. Power rating is 4,000 W CW to 250 MHz, 1,400 W CW to 1 GHz, 1,100 W CW to 2 GHz and 900 W CW to 3 GHz. The relay measures 4.75 in.2 x 4 in. tall and weighs under 3.5 lbs. The relay is RoHS compliant with a standard DE9P or DB15P. It is available in failsafe or latching configurations with 12 and 28 V DC operation.
Res-Net Microwave Inc.
Diamond Power for Space
The CVD series of resistors, termination and thermal jumpers offers excellent power handling capabilities and frequency response to 30 GHz. The superior thermal properties of CVD diamond (high conductivity and low expansion) make these components ideal for pulsed power applications. The mechanical and electrical characteristics of these chips provide a robust solution for many aerospace and military applications, while its standardized production process keeps the cost competitive for commercial use.
RF-Lambda
Low Noise Amplifiers
RFLUPA26G40GD RF-Lambda is introducing new hermetically sealed MIL-STD-883 miniature embedded packaging for drop in applications. Frequencies covering 1-2GHz, 2-4GHz, 4-8GHz, 2-8GHz, 6-18GHz with Noise Figure range from 0.5dB to 1.2dB max. The package can be coaxial or drop-in.
RFMW
Doherty MMIC Solution
The AmpleonBLM10D3438-70ABG is a three-stage, fully integrated Doherty MMIC solution for 3.4 to 3.8 GHz power amplifier designs. The Doherty configuration performs well with DPD, making it perfectly suited for mMIMO 5G applications in the N78 band. Using Ampleon state-of-the-art GEN10 LDMOS technology, it delivers > 30 dB of gain and 10 W average power from a 28 V supply. Carrier and peaking device, input splitter and output combiner are integrated in a 10 × 10 mm plastic package.
Minimize Radar Size and Weight
The QPA0007 reconfigurable MMIC power amplifier offers 35 W for 3.1 to 3.5 GHz, S-Band radar and 30 W for 9 to 11 GHz, X-Band radar applications. Offered in a 7 × 6 mm package, large signal gain is 21 dB in both bands. Dual band operation is time duplexed via control lines. Dual band operation along with small size and light weight, due to GaN technology, enables next-generation radar platforms for SWaP-C initiatives in ships, aircraft, space, mobile and portable systems. 24 to 28 V bias.
Rohde & Schwarz GmbH & Co. KG
Vector Signal Generator
The R&S SMM100A is the only vector signal generator with mmWave testing capabilities in the midrange class. It shows excellent RF characteristics across the entire frequency range from 100 kHz to 44 GHz, covering all bands used in LTE, 5G NR FR1, FR2 and the latest WLAN standards. The instrument offers a maximum RF modulation bandwidth of 1 GHz and a maximum output power of +18 dBm. Its excellent modulation frequency response, EVM and ACPR performance result in reliable, repeatable and accurate tests.
Rosenberger
Aerospace, Security & Defence
Rosenberger provides a comprehensive product portfolio of high-reliable interconnect components and devices which is in accordance with the stringent requirements of MIL-PRF 39012, DIN EN 9100 or ESCC Certification of the European Space Agency. The wide product portfolio qualified for aerospace, security and defence applications includes: RF coaxial components, microwave components and cable assemblies, RF test and measurement products and fiber optic interconnect components. A brochure is available for download from the Rosenberger website.
Samtec
SMPM Solutions
Samtec has released a family of SMPM products designed to support demands of emerging technologies where space is limited and a high operating frequency up to 65 GHz is required. Samtec offers ganged, multi-port solutions in both cable-to-board and board-to-board applications. Standard SMPM connectors with bullet adaptors, and cable assemblies using .047” and .086” cable, are also available and offer a maximum VSWR of 1.40 or better.
SignalCore Inc.
40 GHz Signal Source
The SC5520A and SC5521A are part of the ultra-high frequency synthesizer series of signal sources. They boast a frequency tuning range of 160 MHz to 40 GHz stepping at 1 Hz resolution, and an amplitude range of -10 dBm to +15 dBm typ with phase noise among the lowest in the market. These compact modules are ideal for system integration and appropriate for applications in communication transceivers, automotive radar, optics and as clocks in modern day digital data converters.
Signal Hound
Spectrum Analyzer
Coming soon, Signal Hound’s SM435B is a high performance spectrum analyzer and monitoring receiver tuning from 100 kHz to 43.5 GHz. This next-generation SM-series analyzer can capture a two second, I/Q block of 160 MHz instantaneous bandwidth, which is sent to the PC via an eight-second block transfer or continuous 40 MHz I/Q stream. Featuring 110 dB of dynamic range, 1 THz/sec sweep speed, ultra-low phase noise and PC-connection via USB3.0 - the SM435B continues the Signal Hound tradition of unrivaled value.
Signal Microwave
Edge Launch Connector
Signal Microwave’s new line of higher performance edge launch connectors is designed for the thinner substrates used today. 1.15:1 maximum connector VSWR through 40 GHz (23 dB return loss). The data shown is for two connectors on a 1 in., 8 mil RO4003 substrate with an FR-4 backer. The new design of the connector is intended for substrate thicknesses between 5 to 10 mil (0.005 to 0.010 in.), (0.127 to 0.254 mm).
Southwest Microwave
SuperMini Board-to-Board (SSBB)
Southwest Microwave’s SuperMini board-to-board (SSBB) solutions are ultra-high frequency, miniaturized push-on blindmate connectors for high density PCB interface. The SSBB product line features advanced bullet and receptacle designs, accommodating misalignment of up to 10 mils axial or ± 10 degree radial with no performance degradation. The unique construction of the bullets extends mating and de-mating cycles and enables board-to-board spacing as close as 3 mm. Configurations include stacking, edge-mount, backplane and front panel applications.
SV Microwave
Keyed SMA Cable Assemblies
SV Microwave just released fixed length Keyed SMA cable assemblies that offer an ideal solution when polarization is required. These new Keyed SMA connectors are available in four unique keying configurations and are cabled to standard Ø.085” RF cables. This new self-aligning design offers more space savings than other bayonet style connectors.
Synergy Microwave Corp.
Frequency Translator/Jitter Attenuators
The VFCTS series of frequency translator/jitter attenuator products combine phase locked loop circuitry with a stable low noise VCXO output signal, to significantly reduce jitter of the input reference and provide phase and frequency coherency to the external master reference. The product series is ideal for applications in higher frequency primary master reference signal or clock and multi-loop synthesizers used for higher frequency translation.
Phase Locked Dielectric Resonator Oscillators
The KSFLOD series of phase locked dielectric resonator oscillators deliver ultra-low noise signal purity with reduced power consumption and small size. A variety of frequency options is available for phase locking applications to the available external master reference and output signals. The series covers single CW output frequency starting at 6 GHz through 15 GHz fundamental, and up to 45 GHz multiplied.
Wenzel Associates Inc.
Card Assembly Frequency Sources
Wenzel Associates’ offers card assemblies in several standard and custom form factors (VPX, VME, VXI, etc.) to provide low phase noise performance at frequencies up to 16 GHz for operation in static and dynamic environments. Each card assembly is comprised of an industry-leading ultra-low noise ovenized crystal oscillator (hard mounted or vibration isolated), frequency conversion circuits and other hardware mounted or integrated on a specified card assembly to provide a high performance frequency source with unparalleled phase noise performance.
West Bond
Convertible Manual Wire Bonder
The West Bond ESD protected model 7KE convertible manual wire bonder interconnects aluminum, gold or copper wire leads to various semiconductor devices such as RF, microwave products, hybrids-MCMs, discrete devices-lasers chip-on-board, optoelectronic modules, sensors and more. Includes one convertible tool assembly to bond 45-degree feed wedge round wire, 90-degree feed wedge for round wire and flat ribbon and ball bond methods with a mechanical advantage using West Bond’s 8/1 Ratio X-Y-Z Micromanipulator and pure orthogonal travel in X-Y-Z axis.
XMA Corp.
65 GHz Attenuators
XMA’s 1.85 mm, 65 GHz attenuators equipped to withstand cryogenic temperatures and fully space qualified, XMA’s 65 GHz attenuator family is the ideal solution for all high frequency needs. This attenuator has options for a gold-plated copper or stainless steel outer conductor, providing you with high-grade options regardless of your application. XMA’s 1.85 mm attenuators have industry-leading VSWR values and come in all standard attenuation values. Contact sales@xmacorp.com for more details.