White Papers
June 10, 2021
The spectral environment is quickly changing today. It’s becoming more crowded, which is resulting in an increase in spectral noise. This is presenting a variety of new challenges for RF designers, both in terms of the architecture and power needed to transmit and receive signals and the types of jobs filters need to perform in receivers (Rx) and transmitters (Tx).
June 10, 2021
Ultra-wideband (UWB) will be a game changing wireless communications technology. Learn the fundamental principles that have optimized it for secure micro-location-based applications. Discover UWB’s key features, different topologies used in UWB applications, and the main consortiums/alliances working to ensure interoperability and scalability of UWB products.
May 13, 2021
Non-terrestrial networks play a critical role providing service to locations not covered by terrestrial 5G networks. This paper describes the modeling of a SATCOM link, specifically how satellite coverage can be modeled using predictive simulation to capture important effects such as terrain masking, shadowing due to foliage, and multipath fading, which are essential to a proper evaluation of the link budget.
May 13, 2021
IEEE 802.11ax is intended to improve the user experience and network performance in dense deployments in the unlicensed bands. Explore the technology and get an overview of receiver and transmitter test requirement. Learn about the main goals and features of IEEE 802.11ax, the high efficiency PHY, and test requirements.
May 13, 2021
Without question, the rise of 5G has changed the landscape of wireless testing. One of the biggest changes is the ability of test engineers to perform over-the-air (OTA) testing without connecting anything or having a special setup. This is something that was not historically possible with past generations of wireless devices, as a result of FCC regulation and spectrum licensing law.
May 13, 2021
With advances in digital signal processing techniques modern wireless communications systems and radar systems have become increasingly digital and more constraints have been placed on packing more information into less and less bandwidth. On the wireless side, modulation formats have become more complicated with less margin for symbol error.
May 13, 2021
Millimeter-wave technology transforms wireless communications by enabling higher data throughput. It brings a new set of test challenges to the lab including excessive path loss and wideband noise, that degrade measurement accuracy and repeatability.
May 13, 2021
The focus of this white paper is on the general challenge of antenna design and simulation as implemented with antenna-in-package (AiP) and antenna-in-module (AiM) advanced packaging technology, as well as the software tools necessary for antenna, antenna array and feed structure, and front-end simulations.
May 13, 2021
Bias tees are used extensively to apply DC biasing to RF circuits. This Piconics/Modelithics white paper explains how bias tees can be designed using models that are accurate all the way to mmWave frequencies. Design details and simulated results presented. Measured data is then compared to the simulated performance.
April 14, 2021
Most ADAS functions rely on radar sensors, and these safety-critical components must function correctly even under the most demanding of RF environments. We have released a white paper describing a test procedure to replicate real life scenarios where the ADAS radar functions are activated during EMS testing and it contains some very interesting results.