MIcable’s 18 to 67 GHz 8-way ultra-wideband power divider/combiner can accept an 18 to 67 GHz signal and deliver eight output signals with equal amplitude and phase. 

Mlcable's new 0.225-2GHz high power surface mount 90° hybrid has low insertion loss (0.8dB Max.), excellent VSWR (1.30:1 Max.), and extremely good amplitude unbalance (±1dB Max.) 

This high performance 67 GHz mmWave cable assembly utilizes .070 in. low loss semi-rigid cable. The connector screw nut is designed with a movable feature.

MIcable launched DC~40 GHz precision attenuators and DC~70 GHz precision terminations, with accurate attenuation and excellent VSWR. 

MIcable’s Q8T050100 has low insertion loss (0.25 dB maximum), excellent VSWR (1.25:1 maximum), extremely good amplitude unbalance (± 0.55 dB maximum) and phase unbalance (+ 5 degrees maximum).

MPAR-020060S50 is a 2~6GHz 100W GaN amplifier with state-of-the-art GaN design technology. It has high power Psat of 50dBm (Typ.) and high P1dB of 47dBm (Typ.).

0.3 to 50 GHz ultra-wideband 2-way power divider/combiner can accept and divide a 0.3 to 50 GHz signal into two output signals with equal amplitude unbalance and phase unbalance. 

MIcable 0.4-8GHz high power directional & dual-directional coupler series have DC pass capability with a nominal coupling of 30dB/40dB, they can handle up to 600W CW power over the whole frequency band.

Mlcable released the new 1.2 to 2.2 GHz high-power surface-mount 90-degree hybrid. It has low insertion loss (0.25 dB maximum) and excellent VSWR (1.25:1 maximum).

MIcable’s AT110 series armored precision test cable uses low loss, phase and amplitude stable cable, coupled with multi-layer composite armor protection. 

MIcable C29F series 40GHz high-performance SMP microwave cable assemblies have a wide operating frequency range up to 40GHz with excellent electrical performance, the typical cable loss is 4.92dB/m@40GHz.

MIcable C29H air dielectric ultra-flexible & low loss phase stable cable assembly uses air as the dielectric. It's ultra-flexible with a small bending radius of 5mm, and extremely stable in dynamic application environments.

MIcable DC start power divider series covers DC~50GHz and 2-8 way.

The outstanding feature and benefit of MIcable phase matching cable is that the cables can maintain phase matched at straight, bent or coiled status with excellent phase consistency and stability, as well as excellent phase tracking performance over working temperature range. 

The power divider/combiner P32N180670 can accept a 18~67GHz  signal and deliver 32 output signals with extremely good amplitude unbalance (Typ.±0.4dB) & phase unbalance (Typ.±8º).  

The DC start directional coupler series covers DC-50GHz and 10-20dB coupling. Due to extremely wide bandwidth, excellent VSWR, insertion loss, directivity and repeated consistent coupling, 

MIcable released the 0.5~6 GHz high power surface-mount 90-degree hybrid. It has low insertion loss, low VSWR and 100 W power handling capability.

MPAR-020080S47 is a 2~8GHz GaN amplifier with state-of-art GaN design technology. It has higher saturation output power while keeping higher P1dB and better linearity. 

This DC-50GHz 4-way DC pass power divider can accept a DC-50GHz signal and deliver 4 output signals with equal amplitude & phase.

SA-07-8B006050 is a 0.6-5GHz 8x8 butler matrix which can transfer the signal reciprocally from any of 8 ports to any of other 8 ports. 

MIcable 0.6~5 / 2.4~7.25 / 24~43GHz 4x4 & 8x8 wideband high accuracy butler matrices can transfer the signal reciprocally from any of 4 or 8 ports to any of other 4 or 8 ports.

MIcable 0.6-5 and 2-8 GHz 4×4 and 8×8 wideband butler matrices cover 5G NR (FR1) and WiFi 6E, the whole frequency band application in one unit respectively.

MIcable developed a series 0.45-6GHz 2, 4, 6, 8 and 16 ways power dividers, they can handle higher forward and reverse power, have lower insertion loss, 

Model D30H005060 is a 0.5-6 GHz ultra-wide band high power 300W CW, 3KW peak power 30 dB directional coupler. It has DC pass function, can handle 300W CW and 3KW peak power.

These adapters have 1.15:1 max VSWR and over 1000 mating cycles. They can effectively protect VNAs and save the use of expensive VNA test cables.  

MIcable C29S superbend^® cable assembly is low-profile designed for internal and point to point connections, it eliminates the need for costly right angle connectors.

MIcable T26 series are super flexible and durable test cable assemblies. The cable assemblies go to the frequency of 26.5 GHz and the typical VSWR is 1.20:1@26.5GHz.