PMI Model No. PS-360-900M930M-6-SFF is a 900 to 930 MHz, 6-BIT digitally controlled phase shifter having a LSB of 5.6 degrees. The insertion loss is 7 dB typical, 7.5 dB maximum with a typical VSWR of 2.0:1. This is a high speed phase shifter that can switch from one phase state to the next in typically 250 nsec.
PMI Model Number LM-30M3G-C3-1 is a high power limiter that operates from 30 MHz to 3.0 GHz. This limiter can handle input power levels up to 5 W CW and provides a maximum leakage of +10 dBm. The insertion loss is 1.2 dB maximum with a maximum VSWR of 1.5:1. The recovery time is less than 1 usec.
PMI Model No. PUB-14-30M20G-14-LCA is a 30 MHz to 20.0 GHz low noise amplifier which provides 14 dB of gain while maintaining a gain flatness of ±1.2 dB typically over the operating frequency. The noise figure is 3 dB typical and offers an OP1 dB of +14 dBm typical.
PMI Model No. PE2-30-218-4R0-20-12-SFF-BT is a 2.0 to 18.0GHz low noise amplifier that has an integrated bias-tee network on the output port. This amplifier provides 30 dB of gain while maintaining a maximum gain flatness of ±2.0 dB max over the operating frequency.
Model SDLVA-0R71R3-75-CD-3 is a successive detection log video amplifier that operates over the 700 to 1300 MHz frequency range. This model has a Dynamic Range of 75 dB, a log slope of 40 mV/dB. The log linearity is ±1.2 dB typical from -65 to +5 dBm input power levels and a typical TSS of -70 dBm.
Model SDLVA-0R71R3-75-CD-1 is a successive detection log video amplifier that operates over the 700 to 1300 MHz frequency range. This model has a dynamic range of 75 dB, a log slope of 40 mV/dB and a nominal video bandwidth of 20 MHz. This model offers very fast rise times of 9 nsec and fall times of 25 nsec typically.
PMI Model No. PEC2-60-4G8G-1R75-14-12-SFF is a 4 to 8 GHz low noise amplifier that typically provides 60 dB of gain. The gain flatness is ±1.25 dB maximum with a noise figure is 1.75 dB maximum. This amplifier provides a minimum OP1 dB of +14 dBm.
PMI Model No. PE2-30-0R56R0-5R0-22-12-SFF is a 500 MHz to 6.0 GHz low noise amplifier that typically provides 30 dB of gain. The gain flatness is ±1.0 dB maximum with a noise figure is 5.0 dB typical. This amplifier provides a minimum OP1 dB of +21 dBm.
PMI Model No. PE2-28-20R040R0-5R5-18-12-SFF is a 20 to 40GHz low noise amplifier that typically provides 28 dB of gain. The gain flatness is ±2.5 dB maximum and ±1.5 dB typical with a noise figure is 5.5 dB typical. This amplifier provides a minimum OP1 dB of +15 dBm minimum.
PMI Model LM-6D7G7D9G-30W-SFF is a RF limiter that operates in the 6.7 to 7.9 GHz frequency range. This limiter can handle 30 W CW input power and provides a maximum leakage of +18 dBm. This model has a low insertion loss of 1.1 dB maximum and a recovery time of 10 usec maximum.