PMI Model No. P4T-100M40G-90-T-512-292FF-SP is a 100 MHz to 40 GHz, ultra-compact, high speed, single pole, four throw, absorptive switch. This switch offers over 100 dB of port to port isolation from 100 MHz to 18 GHz, over 90 dB from 18 to 26.5 GHz and over 75 dB from 26.5 to 40 GHz.
PMI Model No. PEC-37-9G10G-3R0-27-SFF is a low noise amplifier that operates over the 9.0 to 10.0 GHz frequency range. This model provides 28 dB of gain and offers a low noise figure of 3.0 dB maximum. The amplifier provides an OP1 dB is +27 dBm minimum and operates on +10 to +15 VDC with 400 mA of typical current draw.
PMI Model No. PEC3-40-30M26R5G-6R0-12-12-SFF is a 30 MHz to 26.5 GHz low noise amplifier that provides greater than 35 dB of gain while maintaining a maximum gain flatness of ±3.5dB maximum over the operating frequency. The noise figure is 6.0 dB typical and offers an OP1dB of +12 dBm minimum. The operating voltage is +12 to 15 VDC and the current draw is 700 mA maximum.
PMI Model No. PE2-35-1R02R0-1R4-17-12-SFF is a low noise amplifier that operates over the 1.0 to 2.0 GHz frequency range. This model provides 35 dB of gain and offers a low noise figure of 1.4 dB typically. The amplifier provides an OP1 dB is +17 dBm and operates on +12 to +15VDC with 160 mA of typical current draw.
Model 7CL5125-1490-CD-SFF is a band pass filter centered at 5125MHz and has a nominal bandwidth of 1490MHz. This filter provides over 40dB of rejection between 3.0 to 3.658GHz and between 6.65 to 7.3GHz and over 65dBc of rejection between 1.5 to 2.5GHz.
PMI Model SDLVA-500M4G-CD-1 successive detection log video amplifiers (SDLVA) offers 70 dB dynamic range over the frequency range of 0.5 to 4.0 GHz. This model offers an ultra-fast rise time of 10 nsec maximum, a recovery time of less than 60 nsec and a limited RF Output of +7 dBm. 
PMI model SDLVA-250M6G-CD-1 successive detection log video amplifiers (SDLVA) offers 70 dB dynamic range over the frequency range of 0.25 to 6.0 GHz. This model offers an ultra-fast rise time of 10nsec maximum and a recovery time of less than 60 nsec. The unit is temperature compensated such that log linearity over temperature remains less than +/-2.5 dB over the full operating temperature range of -40 to +70 C.
PMI Model No. PS-500M2G-8B-SFF is a State-Of-The-Art, 8-bit digitally controlled phase shifter that operates over the 500 MHz to 2.0 GHz frequency range. This model has a typical insertion loss of 10 dB and offers 360 degrees of phase shift via 8-bit TTL control.
PMI Model CDT-2M18-30-BB Options DE, D is a threshold detector that operates over the 2 MHz to 18 GHz frequency range. This model has a low insertion loss of 2.5 dB maximum and operates over an input power range of -30 to 0 dBm. The threshold level is adjustable and the output signal is TTL positive logic.
PMI Model No. P4T-100M2G-50-T-SFF-IN is an absorptive, single pole, four throw solid-state switch that operates over the 100 MHz to 2.0 GHz frequency range. The insertion loss is less than 3 dB and offers port to port isolation of over 50 dB. The switching speed is 25 nsec maximum and the rise and fall times are less than 10 nsec.