We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
PMI Model No. P8T-20M6G-80-R-515-SFF is a single pole, eight throw, reflective switch module with low insertion loss, high isolation and an integral decoded 3-bit TTL driver designed for 20 MHz to 6.0 GHz operation. The unit has a maximum switching speed of 250 ns and maximum operating power of 23 dBm CW max. Specifications include frequency 20 MHz to 6.0 GHz and insertion loss 2.75 dBtyp, 3.25 dB max and measured 2.91 dB.
PMI Model No. PEC2-2G18G-80DB-21DBM-LM-SFF is a 2.0 to 18.0 GHz, limiting amplifier that provides a limited output power level of +21 to +25 dBm for an input power range of -55 to +10 dBm CW. This model has output power level versus frequency compensation such that the limited output power has a flat frequency response. This unit is supplied with SMA(F) connectors in a small housing measuring only 2.98" x 0.78" x 0.26".
PMI Model No. DTA-500M2G-64-10B-SFF is a 10-Bit programmable 64 dB pin diode attenuator with step resolution as low as 0.06 dB over the frequency range of 0.5 to 2.0 GHz. Specificatins include frequency rang for 0.5 to 2.0 GHz, Insertion loss 2.7 dB max and VSWR 2.0:1 max. The DTA-500M2G-64-10B-SFF enviromental temperature is -54°C to +85°C operating and -65°C to +125°C non-operating.
PMI Model No. P4T-500M18G-80-T-515-SFF-2W-IND is a single pole, four throw, absorptive switch. This switch offers 80 dB of isolation and a maximum insertion loss of 6.0 dB. It has a maximum switching speed of 200 ns with individual TTL control. The operating power is +33 dBm CW max and the VSWR is 2.0:1 maximum.
PMI Model No. TDC-30T-0110-CD-1 is a high speed, TTL logic output threshold detector with an input coupler designed to operate from 0.1 to 10 GHz. Specifications include 0.1 to 10 GHz frequency range, 2.5 dB max insertion loss and 2.0:1 VSWR. Finish is gold plated.
PMI Model No. P8T-100M40G-95-T-512-292FF-IND is a high speed, single pole, eight throw, absorptive switch operating over the frequency range of 100 MHz to 40 GHz. It is capable of switching within 100 ns and has 90 dB of isolation. This model is supplied with 2.92 mm female connectors in a gold plated housing measuring 4.0" x 1.5" x 0.4".
PMI Model No. PUC-4G18G-CD-1 is an amplified up/down converter for the frequency range of 4.0 to 18.0 GHz, with an IF range of 10 to 100 MHz. It features a 32 dB programmable attenuator with 10-bit resolution and an output amplifier to provide conversion gain. It also features an IF transfer switch to select the upper or lower sideband.
PMI Model No. SDLVA-2020-OPT112 is a truly DC-coupled successive detection log video amplifier (SLDVA) that has 40 dB dynamic range over the frequency range of 1.0 to 12.0 GHz and provides an 8-bit digital log video output. The unit employs planar diode detectors and integrated video circuitry for high speed performance and outstanding reliability.
PMI Model No. PE2-30-20G20R6G-3R0-10-12-SFF is a 20.0 to 26.5 GHz, low noise amplifier. This amplifier is supplied in our standard PE2 housing that can be used as a SMA connectorized or a surface mount component.
PMI Model No. P1T-500M18G-85-T-SFF is an absorptive, high speed, single pole single throw switch capable of switching within 25 ns typically. The frequency range is 500 MHz to 18.0 GHz. This switch has > 85 dB isolation.
PMI Model No. P8T-100M40G-95-T-512-292FF-IND is a high speed, single pole, eight throw, absorptive switch operating over the frequency range of 100 MHz to 40 GHz. It is capable of switching within 100 ns and has 90 dB of isolation. This model is supplied with 2.92 mm female connectors in a gold plated housing measuring 4.0" x 1.5" x 0.4".
PMI Model No. PUC-4G18G-CD-1 is an amplified up/down converter for the frequency range of 4.0 to 18.0 GHz, with an IF range of 10 to 100 MHz. It features a 32 dB programmable attenuator with 10-bit resolution and an output amplifier to provide conversion gain. It also features an IF transfer switch to select the upper or lower sideband.
PMI Model No. SDLVA-2020-OPT112 is a truly DC-coupled successive detection log video amplifier (SLDVA) that has 40 dB dynamic range over the frequency range of 1.0 to 12.0 GHz and provides an 8-bit digital log video output. The unit employs planar diode detectors and integrated video circuitry for high speed performance and outstanding reliability. 
PMI Model No. PE2-30-20G20R6G-3R0-10-12-SFF is a 20.0 to 26.5 GHz, low noise amplifier. This amplifier is supplied in our standard PE2 housing that can be used as a SMA connectorized or a surface mount component.
PMI Model No. P1T-500M18G-85-T-SFF is an absorptive, high speed, single pole single throw switch capable of switching within 25 ns typically. The frequency range is 500 MHz to 18.0 GHz. This switch has > 85 dB isolation.