San-tron Inc. has announced the release of their pSeries pressurized connectors, which provide low-loss, high-stability performance through 30 GHz at +/-65 psi. These pressurized connectors, which meet the IP68 standard, feature a simplified, three-piece design – body, center contact, and an innovative dielectric – which eliminates troublesome internal O-rings, gaskets, and silicone greases.
RSS
RFMW Ltd. announces design and sales support for the Delta Electronics Manufacturing 1313000G051-000, an 18 GHz SMA female, four-hole, flange mount connector with solder cup. Produced for commercial, industrial, and military applications where a quality SMA interconnect is required, the 1313000G051-000 connector body is stainless steel with gold plating per MIL-G-45204 and houses a Teflon dielectric. The center contact is gold plated.
Pasternack adds a family of waveguide transitions operating from 5.85 to 110 GHz across fourteen frequency bands. These waveguide transitions, also referred to as waveguide adapters, are widely used in high power wireless applications such as instrumentation, test benches, SATCOM, MILCOM, radar, and telecom where signal strength and integrity are critical. Currently, there are 23 unique models of waveguide to waveguide transitions offered from stock at Pasternack.
RFMW Ltd. announces design and sales support for the MiniRF MRFXF0032 transformer. The MRFXF0032 is an unbalanced to balanced design with a 1:1 impedance ratio. Configured as a transmission line transformer, it covers a frequency range of 45 to 1200 MHz with superior insertion loss of 0.4 to 0.6 dB across this band width thereby supporting applications where power and noise figure are critical in the circuit design.
RFMW Ltd. announces design and sales support for the MiniRF MRFXF0024, a 1:1 impedance ratio, transmission line transformer covering frequencies from of 45 to 1200 MHz. Capable of supporting DOCSIS3.1 requirements, the MRFXF0024 is designed for applications requiring low loss and where noise figure (NF) concerns are critical. Characteristic impedance is 75 ohms and insertion loss ranges from 0.4 dB for return path applications to 0.6 dB for downstream circuits.
RFMW Ltd. announces design and sales support for API Technologies’ 345C single channel rotary joint. API rotary joints are used to transmit RF energy from a stationary RF source to a rotating RF line and find applications in military and commercial markets such as mobile satellite communication systems, radar systems including civil air traffic control, weather radars or anywhere rotational force might damage a transmission line.
RFMW Ltd. announces design and sales support for SMA terminated coaxial pigtail cable assemblies from P1dB. The P1CA-SAFPT-034SR-2 is one of a family of pigtail cables that include semi-rigid, conformable and jacketed conformable cable styles. P1dB pigtails are commonly used to inject or sample RF signals during prototyping or testing of RF circuits by simply soldering the unterminated cable end onto a pin, copper trace or test pad.
San-tron produces rugged 7/16 DIN RF and microwave coaxial connectors (aka the 7-16 DIN connector) for applications requiring high-power transmission and extremely low intermodulation distortion (IMD), such as wired and wireless communications. Available as a weather-sealed coaxial cable connector, bulkhead-mount, or panel-mount receptacle, these durable 7/16 coaxial connectors incorporate a reliable, screw-type coupling mechanism.
Barry Industries announces the introduction of an ultra-broadband, DC to 60 GHz chip termination for microwave applications. The TV0404FA-50R0JN-91 is a compact, 0404 (1.016 x 1.016 mm) size chip constructed of robust thick film on alumina with a wire-bondable input pad and epoxy or solderable ground. This 50 ohm impedance device is RoHS/REACH compliant and is rated at 250 mW on a 100°C mounting surface temperature.
TMS' extensive and successful space heritage stretches back to the early days of space applications. One of the first companies receiving MIL-PRF-38534 Class K certification, TMS earned the space community's trust by developing, providing, and supporting the industry's most comprehensive line of space-qualified products. TMS' quality certifications include MIL-PRF-38534, Classes H & K (TRB Option), ISO 9001 and AS9100.