Featuring our line of 50 W low PIM attenuators, within series and between series in; 4.1/9.5, 4.3/10.0, 7/16 DIN & Type N connectors. With PIM spec of -160 dBc typ, while handling full rated power to +85°C with no power deration over temperature. Covering 0.698 to 2.700 GHz frequency bands and weatherproof IP67 rated. Products are verified for RF performance and PIM tested to the industry standards.
RSS
RFMW Ltd. announces design and sales support for an ultra-broadband 2-way SMA power divider operating from 1 to 18 GHz. P1dB, Inc. provides the P1PD-SAF-0118G30W-2 as an off-the-shelf item from their vast inventory of in-stock devices. The P1PD-SAF-0118G30W-2 is a Wilkinson design capable of handling 30 W of continuous wave RF power. Maximum insertion loss is 1.0 dB per path. 
Richardson RFPD Inc. announced the availability and full design support capabilities for a 2.4 GHz WLAN/BT LTE coexistence filter from Qorvo. The 885128 is a high-performance, high-power bulk acoustic wave (BAW) band-pass filter with extremely steep skirts. It simultaneously exhibits low loss in the WiFi band and high near-in rejection in the approximate LTE bands. The new BAW filter is specifically designed to enable coexistence of WiFi and LTE signals.
Richardson RFPD Inc. announced the availability and full design support capabilities for two high-power receive protection circuit limiters from Qorvo. Using Qorvo’s passive GaAs VPIN technology, the new devices do not require bias and are offered in small plastic overmold packages. This simplifies system integration while maximizing performance and protection. The limiters are ideal for commercial and military radar applications, communications systems and electronic warfare.
MECA is pleased to announce its addition to our broad band line of power dividers with the 32-way splitter. Available in Type N & SMA, 30 W Wilkinson power dividers, optimized for excellent performance with industry leading specifications from 500 MHz to 6.00 GHz. Offering typical VSWR’s ranging from of 1.30:1, Isolation of 18 dB typical offering phase and amplitude balance typically only seen in narrower/octave band models.
Featuring our line of 50 W low PIM attenuators, within series and between series in; 4.1/9.5, 4.3/10.0, 7/16 DIN & Type N connectors. With PIM spec of -160 dBc typ, while handling full rated power to +85°C with no power deration over temperature. Covering 0.698 to 2.700 GHz frequency bands and weatherproof IP67 rated. Products are verified for RF performance and PIM tested to the industry standards.
Passive Plus Inc. (PPI) now offers a line of Traditional RF Bypass Capacitors. These dielectric capacitors can be mounted either horizontally or vertically and are available in 3 case sizes for RF/Microwave applications. 0505X series size is .055" x .055" with value range: 470pF to .01µF, 1111X series size .110" x .110" has value range: 4700pF to .1µFF, and the 2225X series .220" x .250" with value range: 0.010µF to 1.0µF.
RFMW Ltd. announces design and sales support for a LowDrift™ BAW filter created for Band 25 repeater uplink applications centered at 1882.5 MHz. Qorvo’s 885048 has 65 MHz of usable bandwidth and can handle up to 1 W of RF input power. Featuring a low insertion loss of 2.3 dB max, the Qorvo 885048 offers single-input, single-output operation. No external matching components are required which simplifies circuit design.
Passive Plus Inc. (PPI) now provides its customers with the option of specifying capacitor assemblies with SAC 305 solder, which is 100% lead free. Previous to this breakthrough, engineers were limited to specifying capacitor assemblies that typically utilized a high lead based solder to attach the leads to the capacitors. PPI has qualified this lead free solder option to enable engineers to design 100% RoHS compliant capacitor assemblies.
RFMW Ltd. announces design and sales support for 65 GHz coaxial attenuators using 1.85 mm connectors. P1dB offers a series of these attenuators with available fixed attenuation values of 3 dB, 6 dB, 10 dB, 20 dB and 30 dB. With a maximum VSWR of 1.35:1, these P1dB attenuators find applications in test and measurement production environments and optical networking. The table below defines the part numbers for the associated fixed values.