RS 271

Ultra-low Phase Noise Measurement System

OEwaves introduces the OE8000 family of fully-automated ultra-low phase noise measurement system products. OE8000 is capable of measuring absolute phase noise of -75 dBc/Hz at 10 Hz offset and down to -174 dBc/Hz at 10 MHz offset for any frequency between 6 to 12 GHz without requiring a separate low phase noise reference source or down-converter. Simple setup and user friendly graphic interface allows quick high performance absolute phase noise measurement with a click of the mouse, and in one to three minutes.

OEwaves Inc.,
Pasadena, CA (626) 449-5000,
www.oewaves.com.

Booth 2439

RS 272

PLL Frequency Synthesizers

Orient Microwave Corp. provides frequency synthesizers based on the phase lock loop system. The product series is available for a frequency range of 50 MHz to 3.6 GHz, and any frequency of maximum 2048 ways can be selected by input of 11 bit parallel signals. Features include: 118.4 x 78.6 x 20.5 mm; local output level of +10 dBm minimum; PLL lock alarm; 10 MHz REF input level of +4 dBm ±6 dB; El consumption of 600 mA maximum and RoHS compliant.

Orient Microwave Corp.,
Higashiomi, Shiga, Japan+81-749-45-8121,
www.orient-microwave.com.

Booth 1435

RS 273

Custom Microwave Sub-assemblies

Phase Matrix designs and manufactures custom RF and microwave sub-assemblies up to 50 GHz with built-in control, monitoring and test functions. The company uses soft-board, thin-film chip and wire as well as surface-mount assembly techniques as required for specific applications. Microwave functions include amplifiers, oscillators, up- and down-converters, frequency multipliers and dividers, SPMT switches, filters, variable attenuators and phase-locked loops (PLL). Subassemblies are available for commercial, avionics and military applications.

Phase Matrix Inc.,
San Jose, CA (408) 428-1000,
www.phasematrix.com.

Booth 523

RS 274

Amplified and Filter Switch

PMI has developed model number PEC-1D575G-1AFS-SFF. This multi-function, inte-grated module provides amplification and filtering within the GPS L1 frequency band of 1575.42 MHz. Two input channels are switchable to a common output. This product is designed to handle exposure to extreme environmental conditions including airborne and launch rocket environments.

Planar Monolithics Industries Inc.,
Frederick, MD (301) 662-5019,
www.planarmonolithics.com.

Booth 1646

RS 275

Extended Range Filter

Pole/Zero announces the availability of its new extended range filter. This digitally tunable, two-pole bandpass filter delivers continuous coverage from 30 to 512 MHz and has been designed for integration in radio transceivers where small size and low power consumption are paramount. The filter has a 3 dB bandwidth of 5 percent, typical insertion loss of 4 dB, provides linear performance with RF input levels up to +24 dBm, and is powered by a single +5 V DC supply.

Pole/Zero Corp.,
West Chester, OH (513) 870-9060,
www.polezero.com.

Booth 711

RS 276

Precision Connectors

This new line of precision connectors is designed exclusively for Harbour Industries LL142 cable. Both Male and Female connectors are offered for 2.92 mm (32 GHz), SMA (24/26 GHz), TNCA (18 GHz) and Type N (18 GHz) series. The connectors feature Solder/Clamp terminations and fully captive soldered center contacts. Straight, right angle and bulkhead configurations are available and have been designed for minimum VSWR and insertion loss. In addition, the connectors employ both front and rear environmental seals for superior moisture resistance.

Precision Connector Inc.,
Franklin, IN (317) 346-0029,
www.precisionconnector.com.

Booth 842

RS 277

GPS Notch Filter

Reactel part number 6R7-1575.42-X15N11 is a highly selective GPS cavity notch filter. Centered at 1575.42 MHz, this 15 MHz wide unit exhibits loss of less than 1.25 dB at DC to 1560 and 1591 to 4000 MHz while rejecting CF ±1 MHz by a minimum of 70 dB. Power levels of up to 1 kW are available, and this unit can be fitted with any type of RF connector you may need.

Reactel Inc.,
Gaithersburg, MD (301) 519-3660,
www.reactel.com.

Booth 1504

RS 278

EM Simulation Software

Remcom announces the release of XFdtd® 7.0 (XF7), a new electromagnetic simulation tool for antenna design and analysis, biological EM analysis, microwave circuit design and other EM simulation applications. XF7 marks a departure from other standard 3D EM solvers with a simplified and streamlined user interface, cross-platform functionality, and several time-saving features that are unique to the market. XF7’s most important benefit is improved efficiency due to faster, easier simulation workflow.

Remcom Inc.,
State College, PA (814) 861-1299,
www.remcom.com.

Booth 2622

RS 279

Hermetic Leadless SMT Packages

Remtec has developed cost-effective, hermetic (to 10-8) ceramic leadless SMT substrates and packages with PCTF® Technology for RF components and modules from DC to 40 GHz with enhanced thermal management. Solid thermal vias (K > 200 W/M°K) and wraparounds provide low-inductance. Printed resistors and transmission lines, excellent solderability, capability to withstand multiple soldering and RoHS compliance, combined with low upfront tooling and high reliability are additional benefits. Remtec also offers microwave modeling, circuit design, and test and assembly.

Remtec Inc.,
Norwood, MA (781) 762-9191,
www.remtec.com.

Booth 611

RS 280

Coupler-cabler

These drop-in or connectorized hybrid couplers are suitable for use as a directional coupler or 90° quadrature hybrid. The new RMCL series offers average power handling options between 60 and 1400 W average and nominal coupling options from 3 through 52 dB. Typical electrical performance includes insertion loss of 0.3 dB, VSWR of 1.20 and isolation of 20 dB. Units can be cascaded to obtain broadband widths and is ideal for use in military power amplifier combine/divide stages. Part of the HYBRIDLINE family of board mount couplers, the new devices are available in bulk 1 meter lengths, pre-cut to your frequency or with N or SMA female connectors.

Response Microwave Inc.,
Devens, MA (978) 772-3767,
www.responsemicrowave.com.

Booth 2125

RS 281

Jumper Cables

Many wireless PC board RF modules use Hirose U.FL or I-PEX MHF miniature connectors. RF Connectors, a division of RF Industries, offers jumper cables to connect the PC board to devices housing or case. They use the I-PEX brand MHF connector and 1.13 mm coax cable, compatible with Hirose U.F.L. Assemblies are available with a variety of connector terminations. Most assemblies are manufactured in standard lengths. Electrical performance is good up to 6 GHz with a VSWR rating of 1.3.

RF Connectors, a Division of RF Industries,
San Diego, CA (858) 549-6340,
www.rfindustries.com.

Booth 633

RS 282

High Isolation Switches

RFMD® introduces its new line of single-pole double-throw (SPDT) low loss, high isolation switches. Designed for general purpose switching applications requiring low insertion loss and high power handling capability, the RF3021, RF3023, RF3024 and RF3025 are also ideally suited for battery operated applications. The RF3021 and RF3025 are packaged in a compact, 3x3, 6-pin leadless QFN package, while the RF3023 and RF3024 are contained in a small, 6-pin, SC-70 package.

RFMD,
Greensboro, NC (336) 664-1233,
www.rfmd.com.

Booth 2412

RS 283

12-Throw Coaxial Switch

RLC Electronics’ terminated single-pole, 12- throw coaxial switch combines reliability, long life and outstanding electrical performance in a compact package. Available options include a choice of coil voltages, indicators and TTL drivers or arc suppression diodes.

RLC Electronics Inc.,
Mount Kisco, NY (914) 241-1334,
www.rlcelectronics.com.

Booth 2610

RS 284

RT/duroid® 5880LZ Laminates

RT/duroid 5880LZ material is a PTFE composite designed for exacting stripline and microstrip circuit applications. Rogers’ ground-breaking filler system results in a low density (1.37 gm/cm3), lightweight material making it an ideal choice for high performance, weight sensitive applications such as airborne antennas. RT/duroid 5880LZ laminate has a dielectric constant (Dk) of 1.96 at 10 GHz, providing the lowest Dk of a copper clad microwave material available today. In addition, the dielectric constant is uniform from panel-to-panel and constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5880LZ to Ku-band and above.

Rogers Corp. Advanced CircuitMaterials Division,
Chandler, AZ (480) 917-5223,
www.rogerscorp.com.

Booth 1018

RS 285

Broadband and WiMAX Filters

SANGSHIN ELECOM offers fully customizable broadband and WiMAX filters. A leading supplier of ceramic filters, Sangshin offers over 700 designs in these areas with frequency coverage from < 2 to > 6 GHz in both narrow and ultra wide bandwidths. Configurations range from 2.5 mm through 6 mm heights and from 2 to 6 poles. With the ability to match a custom footprint already in use, Sangshin provides a competitive option to other suppliers. Sample lead times are two to three weeks with full production in four to six weeks. For more information contact SANGSHIN’s exclusive technical distributor, RFMW.

RFMW Ltd.,
San Jose, CA (877) 367-7369,
www.rfmw.com/sangshin.

Booth 418

RS 286

Ultra Low Noise Amplifiers

Skyworks’ new ultra low noise amplifiers offer performance under 0.7 dB while providing high linearity amplification with OIP3 up to 35 dBm. The SKY65037-360LF, operating from 0.7 to 1.2 GHz, and SKY65040-360LF, operating from 1.5 to 2.4 GHz, have the flexibility of external tuning to set gain up to 25 dB and supply current adjustment of 30 to 100 mA. The devices serve high performance receiver applications for wireless infrastructure base stations, repeaters or access points.

Skyworks Solutions Inc.,
Woburn, MA (781) 376-3000,
www.skyworksinc.com.

Booth 1818

RS 287

High Power Switch Package

This Beryllium Oxide (BeO) package and full assembly and testing services are designed for high power semiconductor switches and small Gallium Nitride (GaN), Silicon Carbide (SiC) and Gallium Arsenide (GaAs) devices. Applications for these packages include test and measurement, military radios and radar. The StratEdge BeO package has a thermal conductivity of 270 W/meter Kelvin (w/mK). The 0.205 inch diameter circular package has a BeO disk base to accommodate devices of up to 0.030 by 0.040 inches. This standard hermetic package comes with a circular metal lid with gold tin preform. The package is designed with four leads to accommodate single-pole, three-throw switch (SP3T) devices. The maximum assembled package height, including the lid, is 0.056 inches.

StratEdge,
San Diego, CA (866) 424-4962,
www.stratedge.com.

Booth 1011

RS 288

High Frequency Products

SOTA announces the addition of the FiltenatorR to its high frequency product line. The FiltenatorR is a clean attenuator that uses an integrated filter to eliminate high frequency signals. The cut-off frequency can be varied between 5.5 and 8.5 GHz. Standard attenuation values are 1, 3, 6 and 10 dB. VSWR for all four values is less than 1.5, with attenuation tolerance less than ±1 dB. Measuring 0.150" x 0.120" x 0.015" these devices are available with wire bondable or solderable terminations.

State of the Art Inc.,
State College, PA (800) 458-3401,
www.resistor.com.

Booth 2129

RS 289

Fast Settling Synthesizers

The FSFS series of surface-mount fast settling synthesizers is ideal for frequency hopping and jamming applications. The FSFS315555-500 is the first model released in the series providing under 50 uSec of settling time when commanded for start/stop and stop/start frequency jumps. The synthesizer tunes in 5 MHz steps within the tuning band of 3150 to 5550 MHz, having spurious rejection of 75 dBc typical. The phase noise is -80 dBc/Hz up to 100 kHz and -100 dBc/Hz at 1 MHz offset from the carrier. This synthesizer requires +5 and +15 V DC for operation and is packaged in a small surface-mount RoHS compliant package, measuring 1.25" x 1" x 0.3".

Synergy Microwave Corp.,
Paterson, NJ (973) 881-8800,
www.synergymwave.com.

Booths 1111, 1211