MPG
Broadband Diplexer
Whether you require dependable signal separation for defense ops, accurate measurement capabilities for electronic warfare or improved signal integrity for radar applications, MPG’s SPCL-00734 broadband diplexer stands ready to meet your most demanding requirements. This device separates carriers below 5 GHz from their harmonics up to 40 GHz and prevents the carrier from reflecting to the device under test or entering the spectrum analyzer. MPG offers customizable options to meet your size and weight constraints without compromising performance.
Networks International Corp.
Ultra-Low-Profile LC Filters
NIC’s engineering expertise in high-reliability RF products includes low-profile (< 0.1 in.) LC filters that span from 10 MHz to 11 GHz. These compact high performance filters are built on industry-standard PCBs such as Rogers 4350 or 4003 and have high selectivity with an out-of-band rejection of > 60 dB. These products can be customized to meet passband requirements from 1 to 100 percent and pass a wide range of environmental requirements as well. Please stop by Booth #433 for additional information.
NI
Vector Signal Transceiver
The PXIe-5842 vector signal transceiver combines a vector signal analyzer and generator with a user-programmable FPGA and high speed serial and parallel digital interfaces into a single instrument. With frequency coverage from 30 MHz up to 26.5 GHz, up to 2 GHz of instantaneous bandwidth and exceptional RF performance in just 4 PXI slots, the PXIe-5842 is a highly versatile and capable tool for wireless connectivity, cellular, aerospace and defense and general purpose RF applications.
Norden Millimeter
Custom Transceivers
Norden designs custom transceivers for military and commercial applications including airborne, UAV and EW. They have “catalog” models which provide wideband RF and up to 1.5 GHz IF with low phase noise. Norden can provide custom designs which incorporate temperature compensation, variable gain and meet military environmental requirements. Norden also offers models in a low SWaP 3U VPX module which includes a built in LO. Norden engineers utilize proven designs to provide low risk, cost-effective solutions.
Nxbeam
Power Amplifier MMIC
Nxbeam expands its Ka-Band power amplifier MMIC portfolio with the release of a 10 W GaN power amplifier. The NPA2040-DE operates from 27.5 to 31 GHz and provides an average saturated output power of 10 W, 31 percent power added efficiency, and 24.5 dB linear gain. This MMIC is ideal for satellite communication ground terminals and point-to-point communication links and lines up perfectly with Nxbeam’s 20 W and 35 W GaN power amplifier MMICs.
Passive Plus
Broadband Multilayer Ceramic Capacitor
Passive Plus (PPI) has partnered its broadband capacitors with its high frequency resistors for similar case size and footprint to meet your high frequency needs. The 01005BB case size broadband multilayer ceramic capacitor is complemented by the R35-1209BB case size high frequency resistor, and the 0201BB case size broadband multilayer ceramic capacitor is complemented by the R35-2010BB case size high frequency resistor. Modelithics 3D Modeling Data available on the PPI website.
Piconics Inc.
NbTi Inductors
Piconics Inc. introduced a new line of Nobium Titanium (NbTi) wire air coil inductors for quantum computing applications. By utilizing NbTi wire the coils become superconductors at low temperature. The inductors range in inductance values of 10 to 250 nH and offer high frequency performance comparable to Piconics other fine wire air coil inductors. Typical applications include filters and hardware for quantum computing and other cryogenic applications. Custom NbTi wound solutions also available.
Quantic PMI
Phase Shifters & Bi-Phase Modulators
Quantic PMI offers the highest quality phase shifters and bi-phase modulators for 5G, industrial and military applications in frequency ranges up to 70 GHz. Features include analog and digital control, fast speed and response time, low insertion loss, high phase accuracy, small size and standardized packaging. Available options are surface-mount or connectorized; custom packaging; form, fit and function designs; connector options; hermetic sealing, military or aerospace screening available. COTS availability.
Quantic X-Microwave
3U and 6U OpenVPX Card Assemblies
Quantic X-Microwave offers 3U and 6U OpenVPX card assemblies leveraging their proven modular platform for quick turn prototypes and production IMAs. We offer the ability to integrate complex customer specified RF and microwave signal chains that interface with other VPX RF and control cards through a common backplane to realize complete systems, typically for aerospace and defense applications.
Reactel Inc.
Filters, Multiplexers & Multifunction Assemblies
Reactel will feature its full line of filters, multiplexers and multifunction assemblies covering up to 67 GHz at IMS2024 in Washington, DC. Supporting military, commercial, industrial and research needs, we can design the right unit for you. From small, lightweight units suitable for flight or portable systems to high power units capable of handling up to 25 kW, connectorized or surface-mount, large or small quantities, our talented engineers can design a unit specifically for your application. Visit Reactel in booth 814.
Remcom
Impedance Tuner Matching in XFdtd®
Remcom’s XFdtd is a full-wave electromagnetic simulation tool that contains an integrated schematic editor and circuit solver for comprehensive matching network design. Intuitive sliders enable rapid manipulation of inductor and capacitor values to meet design goals and understand the behavior of a circuit. In addition, the schematic editor allows multi-state tuners to be incorporated into full-wave results and supports optimization on system efficiency. Visit Remcom’s booth to learn more about Remcom’s EM simulation solutions.
RF Lambda
600 W, 2 to 6 GHz, EMC Power Amplifier
This wideband EMC power amplifier spans an impressive frequency range of 2 to 6 GHz while delivering 600 W of CW output power. This advanced solution is built to provide engineers and researchers with a single broadband solution, offering high power-amplified signals over a wide frequency range without the need to source several amplifiers. Applications include test and measurement, EMC/EMI, wireless commercial communications, aerospace, military as well as research such as particle physics.
300 W, 2 to 20 GHz, EMC Power Amplifier
This 300 W CW EMC AC-powered amplifier is optimized to cover a broadband frequency of 2 to 20 GHz. This unit is packed with comprehensive protection features such as built in temperature compensation, automatic -calibration, as well as over current, temperature, VSWR, current imbalance and RF input protection. The unit also supports ethernet control and monitoring. Applications include test and measurement, EMC/EMI, wireless commercial communications, aerospace, military as well as research such as particle physics.
18 to 26 GHz, Hermetically Sealed Power Amplifier
Our ultra-wideband power amplifier spans 18 to 26.5 GHz with 51 dBm output power. The DC-powered series offers a compact package, easily integrated into RF systems or test setups. Any of RF Lambda’s DC amplifiers can be provided in an AC-powered unit (RAMPXXX series). Hermetic seal, including 100 percent leak testing as per MIL-STD-883, is available for outdoor and harsh environments.
1 to 18 GHz, Hermetically Sealed SP2T Switch
RF Lambda’s 1 to 18 GHz SP2T high-power 20 W switch combines robust power handling with rapid switching. Ideal for radar or TDD systems, it boasts low 1.8 dB insertion loss and a maximum 200 ns switching time. The comprehensive range of active RF switches, from SP2T to SP160T, supports power handling up to, ensuring longevity without cycle limitations. Perfect for sustained, reliable switching in demanding systems.
RFMW
High Performance 50 Ω, 2.5+ GHz Transformer
MiniRF’s MRFXF0589 is a new high performance 50 Ω, 2.5+ GHz transformer in the new “Mini” 3 × 3.5 mm 4-pin surface mount package. It has excellent return loss, better than 20 dB typical across the band, and extremely low insertion loss of 0.5 dB typical. This transformer offers very good amplitude match which assists minimizing distortion for signal transfer from balanced to unbalanced circuits. MiniRF offers unsurpassed repeatability with 100 percent RF tested devices and low-cost manufacturing.
Smiths Planar X RF Filters for X-, Ku- and Ka-Bands
Smiths Interconnect’s Planar X Series of standard RF filters provide system engineers with high performance, compact, light-weight solutions for critical RF filtering in X-Band, Ku-Band and Ka-Bands. Planar X Series compliments Smiths Interconnect’s broad portfolio of RF/microwave components with an off-the-shelf product reducing the lead times of custom designs.
Spectrum Control Powerfilm Chip Attenuator Design Kit
Spectrum Control‘s Powerfilm chip attenuator design kit is ideal for rapid prototyping and development. It can significantly accelerate development and prototyping efforts and provide designers a great selection of popular Powerfilm chip attenuators for board-level RF module and system designs. The Powerfilm™ PCAAF_W-T9016 kit includes samples of 26 different part numbers in the PCAAW and PCAAF families, making it easy for designers to select the component appropriate for their design.
Richardson RFPD
RadioCarbon and RadioThrorium Design Accelerators
Start developing radio projects in minutes instead of months. Design Accelerators are standardized, off-the-shelf, hardware development platforms that help RF and radio product developers reduce risk and speed time to market. Each design accelerator includes full documentation, open source or licensable software and technical support. Design files of select design accelerators may also be available via license. RadioCarbon and RadioThrorium design accelerators were developed by Richardson RFPD to support high-power software defined radio, troposcatter, satcom and 5G mmWave communications applications.
RLC Electronics
Panel Mount-SMT Filters
RLC Electronics is manufacturing 200 W cW panel mount-SMT filters. This tubular filter, which operates in UHF/L-Band, is designed to be panel mounted on one end and board mounted on the other end. The exposed pin is soldered directly to the customer’s board, utilizing the mounting bracket to establish good ground. This saves at the customer end on cost and loss (no cables or mating connectors required). This filter is used in a handheld radio system. Similar designs available in higher/lower frequency and power combinations.
Rosenberger
Compact Calibration Kits – for MSO and MSOT Calibrations
Compact calibration kits from Rosenberger – available in various common coaxial interfaces, combine all necessary calibration standards in one compact unit, small, easy to handle and light weight. The 3-in-1 calibration kits can be applied for complete MSO calibrations (open – short – load) of single port VNAs, the 4-in-1 calibration kits can be used for complete MSOT calibrations (open – short – load - thru) of two or more port vector network analyzers. Rosenberger runs its own calibration laboratory accredited and controlled by the German accreditation body DAkkS (Deutsche Akkreditierungsstelle) – according to DIN EN 17025.
Saetta Labs
Sapphire Loaded Cavity Oscillators
Saetta Labs is introducing a line of ‘whispering-gallery’ Sapphire Loaded Cavity Oscillators (SLCO) at X-Band. These SLCOs are pure microwave oscillators exhibiting unparalleled low phase noise of -155 dBc/Hz at 10 kHz offset (8 GHz). Melding state of the art materials with meticulous engineering they are a complete sub-system operating free-running or locked to an external reference. 8 GHz, 10 GHz, 10.24 GHz, 12 GHz and customer specified. Visit us at IMS booth 344.
Samtec
Phase & Insertion Loss Stable Cable Assemblies
Samtec’s Nitrowave™ high performance microwave cable offers improved phase and amplitude stability over flexure. Performance is optimized at frequencies that go beyond traditional industry targets to support emerging applications in the aerospace/defense, test and measurement and instrumentation markets. Initial product release includes LL043 Series with 2.92 mm, 2.40 mm and SMA connector end options. Additional Nitrowave™ cable assemblies coming soon.
SignalCore
40 GHz RF Down-converter
The SC5319A and SC5320A are Ka-Band single stage down-converters, with input RF range from 20 GHz to 40 GHz, external LO frequency range from 10 GHz to 20 GHz, output IF range from 100 MHz to 4 GHz and 3 dB bandwidth of 2 GHz. These modules feature an internal synthesized LO, selectable RF preamplifier and variable gain control. As being compact and versatile standalone down-converters, they are ideal for SISO and MIMO applications.
Signal Hound
High Performance Spectrum Analyzer / Monitoring Receiver
Signal Hound’s SM435C is a high performance spectrum analyzer/monitoring receiver tuning from 100 kHz to 43.5 GHz. This next-generation SM series analyzer includes a 10 Gb Ethernet SFP+ port, enabling communication with a PC over long distances using a fiber-optic cable. Designed for precision, remotely located, RF data analysis, the SM435C is perfect for 5G mmWave monitoring and analysis, 24 GHz ISM frequency monitoring, complete Ka-Band spectrum testing and analysis of emerging and new high frequency RF signals.
Smiths Interconnect
HR TXS Series
Smiths Interconnect has extended its offering of high frequency surface-mount chip attenuators with the release of its HR TXS Series, a small, easy-to-implement, high-reliability product qualified for space and defense applications. The HR TSX Series is qualified to MIL-PRF-55342 and designed to offer excellent broadband performance up to 50 GHz, while delivering increased power handling in a small 0604 surface-mount package. It allows wider coverage than traditional components while providing optimized return loss for multiple frequency ranges.
