Five-bit Digital Step Attenuator

Atlanta Micro Inc.
AM2010 is a wideband 31 dB five-bit digital attenuator covering the DC to 30 GHz frequency range in 1 dB steps. The positive control device provides low insertion loss, flat frequency response and low attenuation error over the operating temperature range of -40°C to +85°C. Packaged in a 4 mm QFN with internal 50 Ω matching, internal decoder circuitry and drawing less than 2 mA of current, the AM2010 is suited for low SWaP applications.

Atlanta Micro Inc.

Full Band Mixers

Atlanta Micro Inc.

HASCO’s full band mixers are designed using the best performance GaAs Schottky beam-lead diodes and balanced circuit configuration, offering excellent low conversion loss and great port to port isolation. The HWMX15-SFV full band mixer operates at a frequency of 50 to 75 GHz, IF frequency up to 10 GHz and typical conversion loss of 10 dB. HASCO’s full line of full band mixers support waveguide band operations at frequency levels up to 110 GHz.


1P8T RF Switch

Atlanta Micro Inc.

Save time and budget with JFW’s new commercial solid-state RF switch model 50S-2133 SMA. It is a self-terminating 1P8T RF switch that operates 20 to 5,000 MHz. Its solid-state design gives you the reliability and repeatability that automated RF testing requires. Its price and delivery gives you an economical automated RF testing choice.

JFW Industries Inc.

Out-of-Band Emission Filter Solutions

Atlanta Micro Inc.

MCV Microwave offers a series of out-of-band emission filter solutions to handle interference in the commercial 700 and 800 MHz band. Filter solutions provide either a very narrow passband with sharp roll off and 40 dB rejection only 300 to 500 kHz away from the passband edge or a band reject filter having excellent notch performance. Dual MIMO with IP67 pole mount package operates between -20°C to +65°C and has been deployed successfully for B14 uplink and downlink frequency and B14/B13/multiband radios.

MCV Microwave

Hybrid Combiner/Dividers

Atlanta Micro Inc.

High-power, 3 dB hybrid couplers useful in public safety applications for combining two transmitters to share one antenna or high-power splitting. Covering 350 to 570 MHz UHF Unique air-line construction provides lowest possible insertion loss while delivering high isolation (27 dB typ), exceptional VSWR (1.15:1 typ) and superior phase balance (3 deg maximum). Rated for 500 W (average and available with 7/16 DIN and Type N interfaces. Made in the U.S. with a 36 month warranty.

MECA Electronics Inc.

Directional Coupler

Atlanta Micro Inc.

Mini-Circuits’ model ZCDC130E1653+ is a wideband directional coupler for a wide range of applications from 1 to 65 GHz. Well suited for mobile communications, satellite communications and test and measurement applications, the RoHS-compliant directional coupler features 13 dB typical coupling with ±0.9 dB typical coupling flatness across the full frequency range. The typical mainline insertion loss is 0.7 dB from 1 to 18 GHz, 1.3 dB from 18 to 40 GHz, 1.8 dB from 40 to 50 GHz and 2.3 dB from 50 to 65 GHz.


Two-Way Splitter/Combiner

Atlanta Micro Inc.

Featuring 2.5 GHz bandwidth and 20 dB isolation for 50 ohm applications this low-cost miniature part is designed to split/ combine RF wideband signals while maintaining high RF performance. MiniRF offers highly repeatable performance with a low-cost surface mount package. These parts designed to operate over extreme temperature range -40°C to 85°C with minimal variation. Don’t delay and have mismatched signals in your 5G system, contact MiniRF for samples.


Hi-Q High-Power Capacitors

Atlanta Micro Inc.

Passive Plus Inc. (PPI) is known for their outstanding customer service, high quality product line, competitive pricing and quick delivery times. While other companies are pushing out their lead-times for product delivery, PPI is committed to being able to deliver your needs as quickly as possible. As PPI tries to keep a full inventory in stock, depending on the capacitor and quantities needed, delivery times can be stock to eight weeks.

Passive Plus Inc.

Dual RF Transceiver

Atlanta Micro Inc.

Richardson RFPD announced the availability and full design support capabilities for a new dual narrow/wideband RF transceiver from Analog Devices Inc. The ADRV9002 is a highly integrated, RF transceiver that has dual-channel transmitters, dual-channel receivers, integrated synthesizers and digital signal processing functions. The IC delivers a versatile combination of high performance and low-power consumption required by battery-powered radio equipment and can operate in both FDD and TDD modes.

Richardson RFPD