Coilcraft Stand 253
Ceramic Wirewound Chip Inductors
Coilcraft’s new 0402DC Series ceramic wirewound chip inductors offer the industry’s highest Q factors in an 0402 (1005) size—up to 162 at 2.4 GHz—for super low loss in high frequency circuits. They are offered in 26 standard inductance values ranging from 3 to 120 nH. An additional 73 values are available upon request, including 0.1 nH increments from 2.8 to 10 nH. Most values are available with 2 percent tolerance.
www.coilcraft.com/0402dc.cfm
SPINNER GmbH Stand 266
Low PIM Switching Matrix
With the new SPINNER Low PIM Switching Matrix you can speed up testing in production, for example of mobile communications antennas or filters. It lets you easily boost your output by concurrently measuring PIM and VSWR on separate test paths. And that is not all: thanks to the exceptional reliability of every measurement, you avoid having to frequently repeat tests to compensate for uncertain results. Visit SPINNER at Stand 266.
www.spinner-group.com
Rosenberger Stand 270
Test & Measurement
At EuMW 2018, Rosenberger highlights its latest test & measurement developments—equipment and devices for microwave and VNA measurements, calibration kits (full and industrial version), compact calibration kits such as MSO (open, short, load) and MSOT (open, short, load, thru), microwave cable assemblies and VNA test port cable assemblies, multiport mini-coax and spring loaded coax products for semiconductor testing or PCB connector systems. For aerospace applications the company provides coaxial connectors qualified according ESCC and DIN EN 9100.
www.rosenberger.com
Spectrum Elektrotechnik GmbH Stand 281
Hermetically Sealed Adapters
Spectrum Elektrotechnik GmbH offers a wide range of hermetically sealed adapters to the hermeticity of 10-8 atm. cm³/s minimum. The Adapters use fused in glass seals between center contact and outer conductor. This ensures complete hermeticity of the units. The adapters are normally used at vacuum chambers testing products that are intended for outer space with the testing equipment and the personnel staying at regular environment. Available connector styles are 1.85 mm, 2.4 mm, 2.92 mm, N and TNC.
www.spectrum-et.org
Remcom Stand 282
WaveFarer™ Automotive Radar Simulation Software
WaveFarer is a targeted software solution that simulates raw radar returns for drive test scenarios. High fidelity simulations predict scattered returns from a scene, with support for frequencies up to and beyond 79 GHz. Near-field propagation methods compute raw radar returns from target objects while considering multipath from ground reflections. WaveFarer enables OEMs and Tier 1 suppliers to virtually test and refine results earlier in the design process, improving installed sensor performance.
www.remcom.com
Mician GmbH Stand 287
μWave Wizard Hybrid EDA Software Tools
Mician, a developer of EM software tools for the analysis, synthesis and optimization of passive components like feeding networks, couplers, multiplexers and horn antennas, including reflectors, will show their μWave Wizard hybrid EDA software tools. The tools combine the flexibility of fast and powerful numerical methods with an appealing and ergonomic GUI that enables flexibility and openness including CAD export formats interfacing with most mechanical design tools.
www.mician.com
Teledyne Relays Stand 299
Indium Phosphide HEMT RF Switch
Teledyne Relays introduces the InP1012-40, a new indium phosphide HEMT RF switch. This SPDT reflective switch has a 10 kHz to 40 GHz bandwidth, low insertion loss, high linearity and a switching time under 100 ns. The InP1012-40 can operate from ‐65°C to 125°C, tolerate up to 100 krads of radiation and its 9 mm3 sized flip-chip packaging provides shock and vibration resistance. These features make this RF switch perfect for military and space applications, ATE systems and RF and microwave communication.
www.teledynerelays.com
Passive Plus Inc. Stand 308
Capacitors
Passive Plus Inc. (PPI) is now offering the 0708N (0.065 in. × 0.080 in.) series capacitor. With vertical electrodes which increase bandwidth, these capacitors have low ESR/ESL and high self-resonance. Uniquely designed for excellent heat transfer in high RF applications, the 0708N offers ultra-stable performance over temperature. These capacitors are 100 percent RoHS compliant and also available in tin/lead termination.
www.passiveplus.com
Planar Monolithics Industries Inc. Stand 321
Matched Integrated Modules/ Assemblies
These integrated modules are built in sets of four, and are phase and amplitude matched to industry leading levels of ±10 percent change to ±10° and ±1.5 dB over the 0.5 to 18 GHz frequency range. Incorporating limiters, LNAs, switches and variable digital attenuators, these units allow for high and low gain paths, a calibration input and an auxiliary channel. A low noise figure and high output of +15 dBm OP1dB are achieved by utilizing system analysis software and in-house hybrid/MIC processes.
www.pmi-rf.com
AR RF/Microwave Instrumentation Stand 333
0.7 to 18 GHz CW Dual Band Amplifiers
AR RF/Microwave put two of their state-of-the-art class A CW amplifiers in a single chassis, and now you can instantaneously go from 0.7 to 18 GHz with the reliability of solid-state designs for EMC and EW applications. With up to 60 W in the first 0.7 to 6 GHz band split and up to 40 W output power in the 6 to 18 GHz split, the company put it together for you in one package that costs less, weighs less and takes up less space than two separate amplifiers.
www.arww-rfmicro.com/html/ps-dual-band-amplifiers.asp
Dow-Key Stand 337
RF Matrix Systems
Dow-Key’s ability to design and develop complex, high performance, high-power, custom RF matrix systems make them the ideal choice for communication and ATE applications. Their standard switch matrix configurations are available in the DC to 40 GHz frequency range and are packaged in 19-in. rack-mountable enclosures with remote interface capabilities as well as a LCD touchscreen for easy control access. Dow-Key uses its own line of coaxial switches for these matrices, providing low loss and excellent isolation.
www.dowkey.com
K&L Microwave Stand 337
7 Channel Switched Filter Bank
The 7SFB-225/Q512-O is a 7 channel switched filter bank designed to filter spurious and harmonic content generated by high-power amplifiers and transmitters in the UHF band. These interferers can degrade performance and even damage sensitive equipment. As communications band usage and amplifier technology power densities increase, this challenge becomes more formidable. K&L Microwave has leveraged core competencies in PIN diode based switches and high-power filters to develop a suite of high-power switched filter banks. Please consult the factory for custom filters, other bands or higher power levels.
www.klmicrowave.com
Holzworth Instrumentation Stand 351
Real-Time Phase Noise Analyzer
The HA7000 Series real-time phase noise analyzer products resolve the historical speed and accuracy issues in both R&D and high throughput (ATE) manufacturing test environments. The HA7000 Series includes the HA7062C and the HA7402C Real-Time Engine. These versatile phase noise analyzers offer ease of test setup and high speed acquisition times without compromising on data accuracy or limitations in the measurement floor. An input range to 40 GHz and 100 MHz measurement offset capabilities will be demonstrated at EuMW 2018.
www.holzworth.com