PIN Diode Attenuator

PMI Model PDVAT-100M20G-30-8B is an eight-bit programmable 30 dB PIN diode attenuator with a step resolution as low as 0.25 dB over the frequency range of 100 MHz to 20 GHz. This model offers excellent attenuation accuracy and flatness over the entire 100 MHz to 20 GHz frequency range. At 30 dB the measured attenuation accuracy is ± 0.09 dB and flatness of ± 0.87 dB. Operates on a single +12 VDC to +15 VDC supply at 150 mA maximum/measured at 64 mA.

Planar Monolithics Industries Inc.
www.pmi-rf.com

High-Power 18 GHz SPDT Switch

RLC Electronics announced the addition of a high-power 18 GHz SPDT switch with N connectors to its product capabilities. The switch can handle 1,000 W at 100 MHz, 200 W at 4 GHz and 125 W at 18 GHz and provides high reliability, long life and excellent electrical performance characteristics over the frequency range (including high isolation). Options on the switch include operating mode (failsafe or latching) and coil voltage (12 or 28 VDC), as well as indicator circuitry and a TTL Driver.

RLC Electronics
www.rlcelectronics.com

Vehicular Power Conditioner

thinkRF™ P120 vehicular power conditioner powers in-vehicle equipment through a standard vehicle power supply while protecting equipment from vehicular power transients. The P120 is a must have for mobile spectrum analysis applications. The P120 is designed to give a single regulated output of +12 VDC under different input voltages ranging from +8 V to +32 V. The P120 is compact, lightweight and portable for easy use in vehicles, vans, boats or UAVs. Protect your equipment today.

thinkRF™
www.thinkrf.com

CABLES & CONNECTORS

PHASEFLEX Microwave/RF Test Assemblies

GORE PHASEFLEX microwave/RF test assemblies by W. L. Gore & Associates are considered the Gold Standard for aircraft testing. Military aircraft applications such as radar, EW and C5ISR suites demand reliable testing. For test applications that require precise, repeatable measurements, microwave/RF test assemblies from Gore provide excellent phase and amplitude stability with flexure. Gore’s rugged, lightweight assemblies deliver reliable performance with longer service life and reduced equipment downtime resulting in lower costs for testing in laboratory, production and field test environments.

W. L. Gore & Associates
www.gore.com

AMPLIFIERS

2 to 26.5 GHz Bypassable Amplifier

The AM1101 is a broadband bypassable amplifier covering the 2 to 26.5 GHz frequency range. The device provides low noise figure and flat gain across the entire frequency range while drawing only 100 mW of power. Packaged in a 3 mm QFN with an integrated amplifier bypass path and internal 50 Ω matching, the AM1101 represents a dramatic size reduction over a discrete implementation of a bypassable amplifier.

Atlanta Micro Inc.
www.atlantamicro.com

“U” Series Amplifiers

AR RF/Microwave Instrumentation has added two amplifiers to its “U” (Universal) Series. The new models, 150U1000 (150 W) and 250U1000A (250 W), both cover the 10 kHz to 1,000 MHz bandwidth, adding even more options to a series of amplifiers with universal applications. These Class A amplifiers replace the need for multiple amplifiers to cover the same bandwidth and eliminate dual-band operation. They are fully mismatched tolerant. Ideal for EMC testing, medical/physics research and many other applications.

AR RF/Microwave Instrumentation
www.arworld.us

Solid State Power Amplifier Module

COMTECH PST introduced its latest development for the TWT Replacement market covering the full 2000 MHz to 6000 MHz band providing 75 W linear power in a small, compact, lightweight, ruggedized form factor, ideally suited for UAV, fixed wing, rotary wing applications. This SSPA features built in protection and monitoring circuits, low voltage prime power input, high efficiency and reliable solid-state technology. Unit will self-protect under fault conditions and automatically return to normal operation when fault conditions are removed.

COMTECH PST
www.comtechpst.com

S-Band Magnetron Driver 2.9 to 3.5 GHz

Empower RF’s model 2239 produces a minimum 1 KW peak pulsed power with pulse widths up to 500 μsec. Duty cycles up to 20 percent and 400 KHz PRF’s are noteworthy. A fast TTL gate input is standard and its use optional when complete shutoff of the output stage is desired between pulses. The 2239 is an intelligent amplifier in a compact 3U rack compatible footprint with features ideal for integrating into Magnetron, IoT, Klystron and TWT systems.

Empower RF
www.EmpowerRF.com

D-Band Low Noise Amplifier

SBL-1141741365-0606-E1 is a D-Band low noise amplifier with a typical small signal gain of 13 dB and a nominal noise figure of 6.5 dB across the frequency range of 110 to 170 GHz. The DC power requirement for the amplifier is +8 VDC/40 mA. The input and output port configuration offers an inline structure with WR-06 waveguides and UG-387/U-M anti-cocking flanges. Other port configurations are available under different model numbers.

Eravant
www.eravant.com