COMPONENTS

Solid State Absorptive Switch Matrix

MIcable has developed a 1x64 solid state absorptive switch matrix covering 0.5 to 6 GHz. Compared with the traditional solid state switch matrix, it has lower 4.5 dB typ. insertion loss, higher 70 dB minimum isolation and 250 nS switching speed. The matrix uses phase and amplitude matched design, typical phase and amplitude consistency among each of the ports are at ±5° and ±0.3 dB. The user can control the switch matrix via USB/Ethernet or manual control.

Fuzhou MIcable Electronic
Technology Co. Ltd.
www.micable.cn

SP4T SMA Coaxial Switch

Logus Microwave introduced the premium SPMT SEM Series, engineered to be your direct coax switch legacy replacements. Featuring NRSEM143: SP4T, SMA, normally open, performs DC to 18 GHz at 28 VDC. Series options include latching, failsafe, indicators, TTL, weather sealed and more. Established in 1961, Logus Microwave has been providing globally trusted unmanned aerial vehicle products with customization like you have never seen.

Logus Microwave
www.logus.com

26 to 34 GHz mmWave Four-Way Power Divider

MECA expanded offering of 5G millimeter-wave products. Featuring four-way power dividers covering 26 to 34 GHz with 2.92 mm interfaces. Typical specifications of 1.2:1 VSWR, 19 dB isolation, 2 dB insertion loss and 1 dB amplitude balance. Also available are attenuators, terminations, bias tee’s, DC blocks and adapters. Additionally, octave and multi-octave models covering up to 50 GHz built by J-Standard certified assemblers and technicians. Made in U.S. and 36-month warranty.

MECA Electronics Inc.
www.e-MECA.com

Broadband Components

Passive Plus Inc. (PPI) has expanded its broadband components to include the 0201BB104KW160 broadband capacitor, complimented by the R35-2010BB50R00FR1QE broadband resistor for case size and footprint requirements as well as to meet your high frequency needs.

Passive Plus Inc. (PPI)
www.passiveplus.com

Positive Slope Equalizers

Pasternack, an Infinite Electronics brand and a provider of RF, microwave and mmWave products, has just introduced a new line of positive slope equalizers that are ideal in compensating for gain variation and optimizing performance in systems where excessive losses may occur at the low end of the frequency band. The broadband performance makes them ideal for a variety of applications involved in aerospace and defense, MILCOM and SATCOM, test and measurement and wireless infrastructure.

Pasternack
www.pasternack.com

Four-Way Power Divider

PMI Model No. APD-4-2G26G-292FF-1W is a 2 to 26 GHz, four-way power divider. This model offers a maximum insertion loss of 2.25 dB with a maximum VSWR of 1.7:1 and a minimum isolation of 15 dB; insertion loss 2.25 dB max; VSWR (In/Out) 1.7:1 max; amplitude balance ±0.5 dB; phase balance ±6° max measured +1.71° max, -1.33° min and power handling >1 W CW. Unit contains 2.92 mm (F) connectors and size is 3.00” x 2.00” x 0.375.”

Planar Monolithics Industries Inc.
www.pmi-rf.com

Integrated Microwave Filters (IMF)

Pole/Zero’s new IMF series of digitally tunable bandpass and notch filters features accelerated tuning speeds packed in very small, lightweight QFN packages. IMF frequency hopping filters are available in multiple frequency bands across the 4 to 24 GHz frequency range, with tune times <100 ns via GPIO tuning control (0 V OFF, +5 V ON) of 16 discrete tunable steps. The reduced size, weight, power consumption and cost (SWaP-C) of Pole/Zero’s IMFs make them suitable for applications on radar, electronic warfare, SATCOM-On-The-Move (SOTM), RF front end and commercial platforms.

Pole/Zero
www.polezero.com

High-Power Low Pass Filters

RLC Electronics’ high-power low pass filters are designed for high-power systems in the frequency range of 100 to 8,000 MHz. These filters are designed to handle 2,500 W average under extreme temperature and altitude conditions, while offering low loss (0.15 dB typical) and 1.5:1 VSWR (max). RLC filters offer you the flexibility of choosing your cutoff frequency, number of sections and connector type (N, SC, HN, 7/16) for a truly custom high-power low pass product.

RLC Electronics
www.rlcelectronics.com