Fairview Microwave
Bias Tees
Fairview Microwave, an Infinite Electronics brand and a provider of on-demand RF, microwave and mmWave components, has introduced an innovative series of bias tees. The new line addresses a variety of applications, including research and development, satellite communications, test and measurement, optical communications and more. Fairview’s expanded bias tee offering includes an assortment of coaxial packaged configurations, featuring DC Pin, SMA and BNC DC ports as well as SMA, 2.92 mm and N-type RF ports.
OML
Waveguide Band Fixed Attenuator
OML introduces a new family of precision compact mmWave waveguide band fixed attenuator, xxFAyy series, in 1 in. length. Fixed attenuators are available in WR-19, WR-15, WR-12, WR-10, WR-08, WR-06, WR-05 and WR-03 band. Standard fixed attenuation values are 3, 6, 10, 13, 16, 20, 30, 40, 45 and 50. Custom attenuation value is also available. They are ideal for test and instrumentations, laboratory uses and subsystem integrations.
Passive Plus
Broadband Capacitors
Passive Plus (PPI) has expanded its broadband capacitor line to include the industry’s smallest .010×.005 in. broadband part characterized for RF performance. The 01005BB104 series has been expanded and a new part is now offered with a 10 V rating. Typical applications include: optoelectronics/high speed data, transmit/receive optical subassemblies, synchronous optical networks, broadband test equipment, broadband microwave and mmWave amplifiers and oscillators. Contact PPI directly at +1 (631) 425-0938 or sales@passiveplus.com for quotes, pricing, orders, custom requests or specific engineering questions.
Pasternack
Cables, Cable Connectors, Adapters, Attenuators and Microwave Parts
Pasternack carries a huge selection of microwave parts, RF parts, cables, connectors, modulators, adapters, attenuators plus much more. Bulk quantities are shipped the same day.
Peraso Inc.
RF Solutions
Peraso Inc. has been a leader in providing RF solutions for more than 10 years, with a focus on 5G FR2 licensed bands and the 60 GHz unlicensed band. The company’s Perspectus series of modules utilize Peraso’s high power X720 chipset and are supported by Peraso’s Perspectus Infrastructure software and firmware packages. With a variety of integrated antenna options, and the ability to add a high gain parabolic reflector, the Perspectus system can achieve gigabit data rates at ranges exceeding 20 km.
QML Inc.
Global Sourcing and Domestic Refining
Looking for a global partner with countless capabilities and solid relationships? One with top-notch smelters and overseas refiners? Are you searching for a trustworthy domestic refiner? QML Inc. global sourcing and MST domestic refining is your answer.
Quarterwave
3U Rack-Mountable Amplifiers
The new 9103 series is offered as 3U rack-mountable amplifiers, with standard models providing frequency coverage of 2 to 8 GHz and 6.5 to 18 GHz, with output power ratings of 300 W CW or 1.5 to 2 kW pulsed. All of Quarterwave’s amplifiers feature low noise, high PRF, optional touch screen interface and are fully customizable. Other models of amplifiers are capable of covering 0.8 to 40 GHz, with an output rating of up to 50 kW.
Spacek Labs
Ka-Band Power Amplifier
The high power amplifier, SP352-25-38W, is designed for use from 32 to 38 GHz. 100 nSec switching speed is controlled using TTL. Saturated output power is 6 to 7 W typical, suited for communication and radar applications. Nominal gain is 35 dB with VSWR < 2:1 at both ports. Bias voltage is +8 VDC with 4.5A quiescent current, 8A at saturated output. Switching speed shown; 100 nSec includes propagation delay of trigger cabling.
Spectrum Instrumentation
Optimal GHz Signal Acquisition and Analysis
Spectrum Instrumentation launched two new PCIe digitizer cards which offer a stunning combination of ultra-fast 10 GSPS sampling speed, 12-bit vertical resolution, market-leading 12.8 Gbps data streaming over the PCIe bus, 3 GHz bandwidth and up to 16 Gb (8 GS) of on-board memory. These cards are perfect for scientists and engineers dealing with today’s most challenging GHz-range electronic signals.
www.spectrum-instrumentation.com
Swift Bridge Technologies
RF Cable Product Line
ExpressRF™ is Swift Bridge Technologies’ economical RF cable product line. These flexible and low loss cable assemblies offer excellent performance to ensure accurate and repeatable measurements on the device under test. ExpressRF is available as individual cables and phase matched pairs, matched to within 1 ps, at operating frequencies of 40, 50 and 65 GHz. Male and female 2.92, 2.4 and 1.85 mm precision RF connector configurations are available. All assemblies are 100 percent tested to assure S-parameters meet or exceed their specified performance.
www.swiftbridgetechnologies.com
Synergy Microwave
Surface-Mount Dielectric Resonator Oscillators
Synergy Microwave introduces three new surface-mount dielectric resonator oscillators with extended temperature range and ultra-low phase noise. These products are ideally suited for free running and phase locked applications in radar and high data rate clocking converters for military communications, test instrumentation and 5G and 6G. The SDRO1000-8XT operates at 10 GHz and the SDRO15000-8XT operates at 15 GHz, with phase noise of -104 and -99 dBc/Hz, respectively, at 10 KHz offset. The GSDRO1000-8XT is the introductory product of the “gold series.”
TotalTemp Technologies
Wide Range Benchtop Temperature Chambers and Thermal Platforms
New, wide range benchtop temperature chambers and efficient, accessible thermal platforms offer more options for thermal testing. Now with a +350°C to -150°C temperature range available. These products are offered with the advanced Synergy Nano programmable temperature controller. TotalTemp offers a wide range of systems to meet most environmental testing requirements. TotalTemp offers accessible engineering and a wide range of standard and custom systems to best meet your needs. Most systems offer our two-year warranty.
Wright Technologies
Limiting Amplifier Products
The new LSS-20B series broadband limiting amplifiers cover a wide frequency range of 0.5 to 20 GHz. LSS-20B products can accept a wide range of input power levels, with a limited range of output power variation between 15 and 21 dBm and a saturated power output deviation of ±0.5 dB over the frequency range. The LSS-20B series broadband limiting amplifiers produce > 11 dBc output harmonic separation from -25 dBm to +12 dBm input power.