Materials/Packages/Substrates

Single Component Epoxy Adhesive: Supreme 18TC

Mon, 05 Aug 2024 13:30:51 -0400

Master Bond Supreme 18TC is a single component epoxy adhesive that contains a blend of special thermally conductive fillers.

NASA Low Outgassing Rated Epoxy: EP3HTS-TC

Thu, 19 Oct 2023 09:24:05 -0400

Master Bond EP3HTS-TC is a one part, NASA low outgassing rated epoxy, with an outstanding thermal conductivity of 16-17 W/(m·K).

Low Viscosity, Electrically Conductive Epoxy: EP4G-80Med

Thu, 15 Jun 2023 16:34:16 -0400

Master Bond EP4G-80Med is a one part epoxy designed for use in the assembly of medical devices. This system is formulated with a non-metallic,

Addition Curing Two Part Silicone System: MasterSil 151S

Thu, 20 Apr 2023 13:28:12 -0400

MasterSil 151S is an addition curing two part silicone system that may be used as an adhesive, sealant, coating or form-in-place gasketing material.

Silver Conductive Silicone Adhesive Meets NASA Low Outgassing Specifications

Thu, 14 Apr 2022 16:26:11 -0400

Master Bond MasterSil 151S is an addition curing two part silicone system that may be used as an adhesive, sealant, coating or form-in-place gasketing material.

One Component, Graphite Filled Epoxy Features Electrical and Thermal Conductivity

Fri, 18 Feb 2022 13:25:09 -0500

EP5G-80 is a one component, NASA low outgassing rated epoxy, with a moderate temperature cure requirement of 80°C for 4 hours. It offers electrical conductivity with a volume resistivity of 5-15 ohm-cm and a thermal conductivity of 2.88-3.46 W/(m•K) at room temperature.

Highly Thermally Conductive, NASA Low Outgassing Silver Filled Epoxy

Wed, 13 Oct 2021 22:48:59 -0400

Master Bond EP3HTS-TC is a one part, NASA low outgassing rated epoxy, with an outstanding thermal conductivity of 16-17 W/(m·K).

Silicone Adhesive: MasterSil 153AO

Thu, 26 Aug 2021 21:04:00 -0400

Master Bond MasterSil 153AO is an addition cured two part silicone with a self priming property. It has a high tensile lap shear strength, especially for a silicone.

One Part Fast Curing Epoxy for Bonding and Small Encapsulation Applications

Fri, 25 Jun 2021 21:19:15 -0400

Master Bond EP4EN-80 is a NASA low outgassing approved epoxy, which can cure at temperatures as low as 80°C.

Ultra-Thin PORON® AquaPro™ 37TS9

Tue, 01 Jun 2021 10:02:48 -0400

PORON AquaPro 37TS9 delivers the reliable water sealing capabilities of the AquaPro 37 material family in an ultra-thin, self-adhesive form.

One Component Epoxy: Supreme 17HT

Thu, 29 Apr 2021 09:28:18 -0400

Supreme 17HT possesses high bond strength properties with lap shear strength of 1,900 to 2,100 psi and tensile strength of 7,000 to 8,000 psi.

Single Component Epoxy

Thu, 25 Feb 2021 00:00:00 -0500

Master Bond Supreme 3CCM-85 is a single component epoxy initially designed primarily for glob top and chip coating applications.

Two Part, Electrically Conductive Silicone: MasterSil 151S

Thu, 07 Jan 2021 00:00:00 -0500

Master Bond MasterSil 151S is a two part, electrically conductive silicone. This silver filled, highly flexible system can be used for low stress applications.

Two Types of Absorbers

Mon, 30 Nov 2020 00:00:00 -0500

Absorbers can be used in a wide range of applications, from free space to enclosed spaces. Cavity applications include reducing or eliminating cavity resonances.

Thermally Conductive, Chemically Resistant Epoxy Sealant: EP62-1AO

Mon, 12 Oct 2020 00:00:00 -0400

EP62-1AO is a two part epoxy adhesive and sealant with an exceptionally long working life of 12-14 hours at ambient temperature for a 100 gram mass.

Ultra-Low Loss Prepreg: SpeedWave™ 300P

Wed, 23 Sep 2020 00:00:00 -0400

SpeedWave 300P prepreg can be used to bond a variety of Rogers’ materials including XtremeSpeed™ RO1200™, CLTE-MW™, and RO4000® series laminates.

Single Component, No Mix Epoxy System: Supreme 17HT

Thu, 18 Jun 2020 00:00:00 -0400

Supreme 17HT is a single component, no mix epoxy system for bonding and sealing applications featuring an unlimited working life at room temperature.

No Mix, Thermally Conductive, Electrically Insulative Epoxy: EP3UF

Fri, 14 Feb 2020 00:00:00 -0500

EP3UF is a one component epoxy that contains thermally conductive fillers with very small particle sizes imparting a low thermal resistance of 5-7 x 10^-6 K•m²/W.

Ceramic Substrates: Kyocera, Ceramtec, Coorstek, Corning and Dynasil

Fri, 31 Jan 2020 00:00:00 -0500

Accumet is a microelectronic materials supplier and a reseller & processing center for ceramic substrates and other materials.

Capabilities Brochure: Accelerating Innovation in Manufacturing

Fri, 31 Jan 2020 00:00:00 -0500

Our Capabilities Brochure describes Accumet's laser processing, lapping, polishing and supply chain service capabilities.

Filled Via Planarity

Thu, 30 Jan 2020 00:00:00 -0500

Accumet is the pioneer in lapping and polishing ceramic substrates. It makes perfect sense that we are also very skilled at making filled vias co-planar with the surface of the substrate.

One Component, No Mix, Die Attach Epoxy: EP17HTS-DA

Mon, 27 Jan 2020 00:00:00 -0500

Master Bond EP17HTS-DA is a one component, no mix, die attach epoxy that is electrically conductive and withstands high temperatures.

You don’t have to know everything there is to know about high power laser welding.

Thu, 19 Dec 2019 00:00:00 -0500

Here are a few of the most common laser welding questions and answers. Consider them lesson #1.

Laser Marking Is the Fastest, Cleanest, Most Versatile Approach to Marking

Sat, 09 Nov 2019 00:00:00 -0500

There are a number of laser marking processes to choose from such as ablation, engraving, etching and more. Choosing the right method to achieve a permanent mark for your application depends on the material and type of mark required.

Advanced Materials Processing & Precision Laser Machining You Can Always Count On!

Tue, 15 Oct 2019 00:00:00 -0400

To remain competitive and satisfy their customers, manufacturers face increasing demands for ever-faster delivery. To respond, more and more manufacturers are looking to looking to outsource some or all of their production to one stop shop advanced processing manufacturers.

Custom Prototypes, Housings, Feedthrus, Multi-port Headers and More

Tue, 10 Sep 2019 00:00:00 -0400

Metal Processing Co., Inc. not only specializes in Hermiticity but also in Custom/Unconventional Sealing Requirements. From Housings, Feedthrus, Multi-port Headers, SMP/SMPM Shrouds and more.

Silver Conductive Adhesive: 3HTS-80

Tue, 23 Jul 2019 00:00:00 -0400

3HTS-80 is a one part, silver filled epoxy adhesive that is not premixed and frozen and features an unlimited working life at room temperature.

Two Part Epoxy Polysulfide: EP21TP-2NV

Tue, 16 Jul 2019 00:00:00 -0400

EP21TP-2NV is a two part epoxy polysulfide formulated for use as an adhesive, sealant and potting system.

Ceramic Filled PTFE-based Laminates: TC350™ Plus

Thu, 06 Jun 2019 00:00:00 -0400

TC350™ Plus laminates are ceramic filled PTFE-based woven glass reinforced composite materials providing a cost effective, thermally enhanced material.

High-Frequency Laminates: RO3000® Series

Tue, 15 Jan 2019 00:00:00 -0500

RO3003G2™ high-frequency laminates. RO3003G2 provide improved insertion loss and reduced dielectric constant (Dk) variation.