Find Events

or

EDI CON Online: Near-Field Antenna for RFID Tag Inspection

Registration

Register For This Event

When

9/11/19 11:30 am to 9/11/19 12:00 pm EST

Event Description

EDI CON Online

Title: Near-Field Antenna for RFID Tag Inspection

Date: September 11, 2019

Time: 8:30am PT / 11:30am ET

Presented by: Scott Best, Founder of SiberSci, LLC

Abstract:
RFID Tags are commonly inspected using Far-Field Antennas with a Reader, so multiple RFID Tags are simultaneously illuminated by the antenna beam, which permits each RFID Tag to respond and be counted. However, it is important to realize that RFID Tags are relatively inexpensive to fabricate and deploy onto packages for inventory control, security, and other purposes. These RFID Tags are not commonly inspected before they are deployed, so both Working and Defective RFID Tags are placed onto packages, which creates inventory errors and security losses when packages containing Defective RFID Tags cannot be correctly counted by a Far-Field RFID system.

Hence, RFID Tag inspection systems are often used to sort Working from Defective RFID Tags to mitigate this problem. RFID Tags are mass produced and distributed on tape spools that contain hundreds, and at time thousands of RFID Tags on a single tape spool. It is obvious that a Far-Field Antenna cannot be used to identify individual Defective RFID Tags on a tape spool, so a Near-Field Antenna was developed for this inspection system. The Near-Field Antenna permits identification of individual Working and Defective RFID Tags on a tape spool, permitting only Working RFID Tags to be deployed onto packages and the Defective RFID Tags are subsequently destroyed.

The Near-Field Antenna is also used to locate a single package with a specific RFID Number when a Far-Field Antenna has isolated the location of the package to a container or box containing multiple RFID Tags located on separate packages. Each package can then be inspected with the Near-Field Antenna to identify the package containing the desired RFID Number.

The Near-Field Antenna operates at 915 MHz, and was fabricated as a CPW Meander Line yielding a Return Loss of -14 dB across the IMS band. The CPW Near-Field Antenna was designed to be less than 5-mm away from the RFID Tag, mitigating excitation of more than one RFID Tag by a Reader.

Presenter Bio:

Scott Best received his PhD in Electrical Engineering in 1996 from the University of Utah as a member of the Air Force Thermionic Engineering Research (AFTER) program, which provided him with rigorous theoretical and experimental experience in Vacuum Electronics; Plasma Physics; RF, Microwave, and Millimeter-Wave Engineering; Electromagnetics; Guided Wave Theory; and Antennas. All of this knowledge is fundamentally required to successfully design, fabricate, validate, and manufacture a vacuum tube, known today as a Vacuum Electronic Device (VED). This knowledge has made it possible for Dr. Best to work seamlessly across numerous government and industry applications for the past 4-decades. Dr. Best founded SiberSci, LLC (https://sibersci.com/) in January 2013, which provides Electromagnetic Engineering Services to clients.

Please note:
To register for any EDI CON Online SI/PI events, please visit the Signal Integrity Journal website.

By registering, you are agreeing to allow the data collected to be shared with Microwave Journal®, Signal Integrity Journal™, the speakers & the sponsors of this event. You may be contacted regarding the subject matter presented.

 

Platinum Sponsors

 

.
See More Videos