Fairview Microwave announced its latest product range: the frequency multiplier and divider expansion. This new series, with its cutting-edge capabilities, is set to redefine frequency management across a myriad of applications.

Fairview Microwave introduces its new series of 5G amplifiers, addressing a vast frequency spectrum ranging from 10 MHz up to 8 GHz. 

Fairview Microwave's SMPS interconnects cover frequencies up to 65 GHz while meeting the rigorous demands of military and aerospace applications.

Fairview Microwave announced its newest line of MIL-STD-1553 TRB connectors crafted to accommodate the demanding needs of modern high-stress environments, placing emphasis on both robustness and user-friendliness.

Fairview Microwave presents innovative IoT multiband combination antennas, setting a new industry standard for vehicle, fleet and base station connectivity.

Fairview Microwave has announced a new line of engineering-grade adapters including both in-series and between-series RF and microwave adapters that cater to the myriad demands of the ever-evolving tech industry.

Fairview Microwave announced 10 new models of ultra-broadband, PIN diode switches. These innovative switches come with expanded capabilities that cover ultra-broadband frequencies ranging from 1 MHz up to 75 GHz. 

Fairview Microwave introduces a new series of MIL-SPEC GPS/GNSS antennas for use in a variety of mobile and small form factor applications.

Fairview Microwave has announced the rollout of VITA 67 mini-SMP (SMPM) cable assemblies designed to address the critical needs of industries such as aerospace and defense, ground communication systems, radar systems and avionics.

Fairview Microwave has announced the expansion of its hermetic adapters and connectors product line. 

Fairview Microwave has announced the launch of its newest product line: quad-ridge, dual polarized, broadband gain horns.

Fairview Microwave has announced its new line of vehicle GPS antennas for the ever-evolving automotive sector.

Fairview Microwave announces the introduction of its G-type (round) mounts for standard gain horn antennas. 

Announcing a series of advanced electromechanical relay switches to redefine RF signal routing across an array of market bands, ranging from DC all the way up to 43 GHz.

Fairview Microwave has expanded its product line with 15 new analog and TTL programmable voltage-controlled phase shifters. 

Fairview Microwave has announced its double-ridge waveguide couplers designed with integrated coaxial connectors. They are available in various sizes, including WRD-650, WRD-750 and WRD-180.

Fairview Microwave has announced its latest line of Wi-Fi 6E components that provide robust and efficient wireless data transmission. 

Fairview Microwave has announced the release of its low frequency waveguide standard gain horns.

Fairview Microwave has announced its new line of Wi-Fi 6E antennas set to deliver flawless network communications across various applications.

Fairview Microwave has just unveiled its latest innovation, ultra-wideband bias tees, enhancing the fluid application of DC and RF signals in electronic devices.

Fairview Microwave launched a new series of AC-powered low-noise amplifiers designed for enhanced broadband performance.

Fairview Microwave has announced the launch of its new commercial marine-grade ship/boat RF antennas, a pioneering line of antennas engineered to operate within the marine radio frequencies.

Fairview Microwave announced a new range of test and measurement antennas catering to a diverse set of applications such as lab usage, microwave radio systems and antenna measurements.

Fairview Microwave has announced the launch of a new series of RFID antennas. 

Fairview Microwave has announced the launch of a series of diplexers, offering simultaneous transmission and reception of signals on different frequency bands. 

Fairview Microwave announced the launch of its latest line of heavy-duty-spring vehicle antennas designed to meet the demands of rugged communication applications.

Fairview Microwave announced the launch of its new mm waveguide horn antennas, designed to deliver superior performance and consistency across a broad frequency range.

Fairview Microwave has expanded its product line with a new selection of voltage-controlled analog attenuators and TTL programmable attenuators.

Fairview Microwave launched a new series of ruggedized electromechanical relay switches for reliable RF signal routing in critical applications across various market bands, from DC up to 40 GHz.

Fairview Microwave has unveiled a new series of waveguide power amplifiers designed to cover high mmWave frequency bands from 26.5 GHz to 96 GHz.

Fairview’s latest expansion includes three new product categories: variable phase shifters, continuously variable attenuators and step attenuators. 

Announcing the launch of latest waveguide isolators and circulators for a wide range of microwave applications. 

The VITA 67 multi-port connector blocks are engineered for side-by-side implementation with VITA 46 hardware and are compatible with 0.086-in. 

Fairview Microwave recently released a new offering of RF power dividers and RF couplers with excellent power ratings, a variety of configuration options and greater operating frequency ranges. 

A versatile selection of waveguide mixers, detectors and couplers for 6G, 5G, research and development, test and measurement, electronic warfare and more.

Fairview Microwave has expanded its offering of semi-rigid cable assemblies and connectors designed to negate the need for any custom tooling or jigs in the production process.

Fairview Microwave introduced an innovative series of bias tees addressing a variety of applications including research and development, satcom, test and measurement, optical communications and more.

Fairview Microwave introduced an innovative series of in-stock, negative-slope equalizers. 

Fairview Microwave has introduced a new series of mil-spec GPS/GNSS antennas for use in a variety of mobile and small form factor applications.

Fairview Microwave recently released a series of 10 and 20 kV connectors and adapters. 

Fairview Microwave introduced an innovative series of low PIM, in-building distributed antenna system (DAS) antennas to address the most challenging low PIM requirements for 5G and LTE/4G bands.

A line of 1.00 mm passive coaxial components to address a variety of applications, including research and development, test and measurement, data transmission, satellite communications and more.

Fairview Microwave released a new series of in-stock waveguide horn antennas for addressing a wide range of wireless applications.

The series of VHF/UHF antennas is DC grounded, providing lightning protection. They cover frequencies from 135 to 512 MHz and feature high-power handling of over 200 watts.

Fairview Microwave expanded its line of 40 GHz fixed RF attenuators with 2.92 mm connectors offering attenuation levels of 0 to 10, 12, 15, 20 and 30 dB.

Fairview Microwave has introduced a new series of field-replaceable connectors designed for a variety of RF/microwave applications. 

Fairview Microwave has broadened its line of high-power switches engineered to guarantee high reliability for test and measurement and transmit and receive applications.

Fairview Microwave has broadened its line of high frequency RF adapters, which are engineered for optimal performance in space-limited applications requiring high frequency adapters.

Fairview Microwave has released a new series of waveguide frequency multipliers to address 5G, test and measurement, mobile and satellite communications, radar systems, research and development and weather and Earth observation applications.

Fairview Microwave Inc. has released a series of temperature-compensated amplifiers to address precision performance and test-and-measurement applications.

Fairview Microwave has deepened its portfolio of step attenuators for instrumentation, precision measurements, prototyping and characterization production system and other applications requiring precise control of signal levels.

Fairview Microwave has broadened its line of reliable 12G SDI interconnects that enable high-resolution, uncompressed video signal transmission.

Expanded line of wideband, log periodic antennas that operate from 600 to 6000 MHz for point-to-point wireless communications.

Fairview Microwave Inc. has released a new series of 5G outdoor-rated omnidirectional antennas that cover 4G, 5G, LTE and CBRS bands.

Fairview Microwave’s series of 0° to 180° bi-phase modulators includes nine models that offer impressive performance that includes low insertion loss of 2.5 dB typical, and fast switching speed of 40 nsec typ.

The high frequency VNA test cables display excellent electrical properties such as exceptional phase stability of +/- 6° at 50 GHz and +/- 8° at 70 GHz, as well as VSWR of 1.3:1 at 50 GHz and 1.4:1 at 70 GHz.

RF hybrid coupler models feature a coaxial design with SMA and 2.92mm connectors. They cover a high-frequency operating range of up to 40 GHz for wide band applications. 

A wide selection of off-the-shelf, high-reliability RF components and cable assemblies.

Fairview Microwave introduces SOLT, fixed load VNA calibration kits with four additional interconnect options.

Fairview’s comprehensive line of double ridge waveguide electromechanical switches includes 12 models that feature broadband multi-octave frequency coverage spanning 6.5 to 40 GHz.

Fairview’s waveguide bends, twists and straight sections feature high frequency ranges from 90 to 220 GHz in three waveguide bands.

Fairview’s comprehensive line of class AB broadband high power amplifiers consists of 18 new models spanning frequency bands from 20 MHz to 18 GHz.

Fairview Microwave Inc. has introduced a new line of frequency divider modules that cover broadband frequencies from 0.1 to 20 GHz. 

Fairview Microwave has unveiled a line of coaxial surge protectors created to guard valuable communications equipment from power surges and indirect lightning strikes.

Line of frequency divider modules that cover broadband frequencies from 0.1 to 20 GHz. A comprehensive offering of 28 different models features fixed divide-by-ratios from 2 to 40.

Typical applications for these RF limiters include military communications, EW, fiber optic communication systems and more.

Fairview’s new series of high frequency RF directional couplers is comprised of 24 new models that deliver excellent isolation, low insertion loss and very good return loss.

A line of relay controlled programmable attenuators that offer accurate and stable performance with very low harmonic distortion (IMD). 

Fairview’s extended line of coaxial RF probes now includes four models that deliver 10 dB maximum return loss over a broad frequency range of DC-40 GHz.

Fairview Microwave’s vertical launch connectors consists of 12 models that provide VSWR as low as 1.3:1 and maximum operating frequency of up to 50 GHz.

Fairview Microwave’s skew matched cables are extremely flexible and feature 1 ps delay match. These cables deliver VSWR of 1.4:1 and are 100% tested for skew match.

Fairview Microwave’s coaxial surge protectors were designed to be used in Wi-Fi networks, active antenna systems, cellular networks, GPS systems and public safety communications systems.

Fairview Microwave’s line of integrated, 3.5 mm short-open-load-through (SOLT) 4-in-1 calibration kits are made-up of two models that have a 26.5 GHz calibration capability.

Fairview Microwave’s PIN diode waveguide switches feature fully integrated WR10 and WR12 waveguide ports that support a UG387/U flange and cover E-band (60 to 90 GHz) and W-band (75 to 110 GHz) frequencies.