Industry News

Low Cost Phased Array Antennas for BWA Applications

Introduction to a low cost electronically steered array offering true-time-delay beamforming for ultra-broad bandwidth
Product Feature Low Cost Phased Array Antennas for BWA Applications e-tenna Corp. Laurel, MD Today, most broadband wireless access (BWA) customer premise equipment (CPE) use fixed-beam antennas. These are generally either reflector (dish), or flat-panel array antennas. These antennas have generally been selected based on value - meeting a...
Read More

A Low Loss PTFE-based Bond Ply Material for Multi-layer PCB Applications

Introduction to a high performance, low loss laminate material for microwave telecommunications and high speed digital printed circuit board (PCB) applications
Product Feature A Low Loss PTFE-based Bond Ply Material for Multi-layer PCB Applications Taconic Advanced Dielectric Division Petersburgh, NY Growing needs are developing for pure package high performance, low loss laminate and prepreg materials for microwave telecommunications and high speed digital printed circuit board (PCB) applications. Polytetrafluoroethylene (PTFE), perhaps...
Read More

An Eight-channel YIG-tuned Frequency Synthesizer Array

Development of a new YIG-based frequency synthesizer array that provides up to eight independent frequency channels
Product Feature An Eight-channel YIG-tuned Frequency Synthesizer Array Micro Lambda Wireless Inc. Fremont, CA Low phase noise is a staple of modern communication systems signal sources. For that reason system designers prefer yttrium iron garnet (YIG)-based sources. In addition, many of today's communications systems are required to operate at...
Read More

Laser-activateable Plastics and Laser Devices that Deliver Flexible 3D MID Technology

Use of 3D molded interconnect device (MID) technology to improve the range of laser-activateable plastics and laser devices
Product Feature Laser-activateable Plastics and Laser Devices that Deliver Flexible 3D MID Technology LPKF Laser & Electronics Garbsen, Germany In an increasingly competitive market those companies carrying out electronic production, especially small- to medium-sized enterprises, require fast, efficient and cost-effective solutions to aid the prototyping and production process. What...
Read More

Characteristics of a Large Bandwidth Rectangular Microstrip-fed Inserted Triangular Patch in a Circular Slot Antenna

Analysis of the characteristics of a rectangular microstrip-fed triangular patch in a circular slot antenna using the finite-difference time domain (FDTD) method
Technical Feature Characteristics of a Large Bandwidth Rectangular Microstrip-fed Inserted Triangular Patch in a Circular Slot Antenna The characteristics of a rectangular microstrip-fed triangular patch in a circular slot antenna have been analyzed using the finite-difference time domain (FDTD) method. The impedance and bandwidth of the proposed antenna greatly...
Read More

System-level Filter Design Methodology for WLAN-OFDM Transceivers

Presentation of system-level filter design methodology to efficiently constrain the implementation loss and complexity of a digital orthogonal frequency division multiplex (OFDM) transceiver
Technical Feature System-level Filter Design Methodology for WLAN-OFDM Transceivers Orthogonal frequency division multiplex (OFDM)-based WLAN standards target wireless communications in the 5 GHz band for consumer multimedia applications. Digital OFDM transceiver ICs, based on frequency domain equalization, have been presented. However, it is still a challenge to design a...
Read More

A New Planar Coupled-line Balun for Microwave Applications

Presentation of a simple and effective way to relax the narrow spacing requirement between coupled lines in conventional planar Marchand baluns
Technical Note A New Planar Coupled-line Balun for Microwave Applications This article presents a novel inward collateral coupled-line balun. The new design provides an effective and simple way to avoid the narrow line spacing used in conventional planar Marchand baluns. A new structure with l /4 collateral coupled-lines has...
Read More

Gain for Compressed Amplifiers

Examination of two approaches to the concept of gain, differential and ratiometric in compressed amplifiers
Tutorial Gain for Compressed Amplifiers There is growing interest in operating amplifiers into compression to achieve higher power-conversion efficiencies. It becomes constructive then to revisit the concept of amplifier gain, because when an amplifier operates in compression the general assumption that the output signal is directly proportional to the...
Read More

New Products

New Products COMPONENTS Eight-way Power Divider The 1-AD series of eight-way power dividers offers excellent phase and amplitude balance between ports for phased array signal applications. The series has 50 W impedance with a 1 W power rating from 2 to 500 MHz, phase balance of 0.5° and an...
Read More

Around the Circuit

Around the Circuit INDUSTRY NEWS Andrew Corp. has agreed to buy closely held Celiant Corp. for $470 M in cash and stock. Boards of both companies unanimously approved the deal. The deal represents the largest-ever acquisition by Andrew Corp. After the deal, Andrew will become the world's largest independent...
Read More