Microwave Journal
www.microwavejournal.com/articles/27729-customized-loads-and-attenuators

Customized Loads and Attenuators

January 17, 2017

Gruppe-Load-1

Customized loads and attenuators 

You can combine our new loads and attenuators specifically to meet your requirements. You decide which connector systems are to be installed, the power to be absorbed and, in addition to this, you also define the attenuation for the attenuators and if required, an integrated DC break.

SPINNER assembles your individual product for you – without a surcharge – which can be delivered quickly.

In mobile radio communication systems, many different connector systems are used. They can be connected using adapters, but wouldn't it be desirable to install exactly the product that precisely fits the adjacent components? This saves time and money required for purchasing and installing adapters and also minimizes the risk of errors, because the fewer components you install, the better the overall performance of the system.

With in-building projects, there is often also a space problem so that it would be desirable to install a component without having to use adapters or, in the case of attenuators, to have the DC break already integrated in the component.

However, not only the connector system can be configured individually, but also the power to be absorbed in the product and, in the case of attenuators, also the attenuation. In this way, you are able to combine your individual product and order it from SPINNER using the respective sales article numbers.

The following parameters can be configured individually. The new 4.3-10 connector system with its different characteristics has become generally accepted at SPINNER:

 

Loads

Attenuators

Connector

7-16 male/female; 4.3-10 male/female; N male/female

Power

25W, 50 W, 100 W, 200 W

Attenuation

-

3, 6, 10, 20, 30, 40 dB

DC break

-

optionally integrated

Information on how to configure the loads and attenuators individually can be found in the data sheets in our Product Finder. The products can be ordered using the respective sales article numbers.

See video on our Youtube channel how to flexibly configure SPINNER loads and attenuators (Link: https://youtu.be/bQLpXcX_cYI )

Vendor-View-Logo A1