Microwave Journal
www.microwavejournal.com/articles/26991-ethernet-controlled-broadband-noise-generators

Ethernet Controlled Broadband Noise Generators

August 19, 2016

Broadband Noise GeneratorsAtlanTecRF, a leading global RF and microwave components and equipment manufacturer, launched its RNG range of broadband noise generators featuring Ethernet control.

Designed to form a built-in test facility in permanent installations of communications equipment or production test set-ups, these high output instruments operate in frequency ranges starting at 10 Hz and continuing up to 18 GHz in standard configurations with a capability to 40 GHz and beyond for custom applications.

The nineteen standard models have total noise output power in the range -20 to +30dBm with noise densities from -122 through to -13dBc/Hz. Output level can be controlled either locally with convenient and easy to interpret increase/decrease front panel buttons and LCD readout or via Ethernet with remote GUI derived from an mBed within the instrument.

As an example, model RNG-1613 provides +10dBm total noise power over a frequency band of 10MHz to 2500MHz and has the option of a 30dB or 60dB attenuation range with a highest level noise density of -84dBc/Hz. This particular unit is therefore suitable for signal/noise measurements in most cellular bands as well as satellite communications L-band and also baseband frequencies for many radar and countermeasures applications.

Among the many standard options is the facility for passing the signal under test through the instrument where it is combined with the white gaussian noise which can then be adjusted in amplitude. Another important option is the output mute which, operated remotely, allows the instrument to be on standby for short term tests as needed.

Speaking at the launch of this new range, Geoff Burling, AtlanTecRF C.E.O. said “Broadband Noise Generators have always been one of our signature test equipment ranges and with the launch of the new RNG series we have now introduced enhanced capability for remote operation with all the functionality of our traditional and well liked instruments”.

The RNG series are all designed for 19” rack mount installation with 80-240V, 50/60Hz input, although portable and battery powered versions can also be supplied.

Vendor View Logo