COMPONENTS

Solid-State Switch

Eravant

SK4-7531148030-1010-R1-M is a MMIC based, solid-state single pole, four throw (SP4T), reflective type switch with a TTL driver that operates between 75 and 110 GHz. This model offers a small form factor by integrating the switch and driver into a common housing and achieves a low insertion loss by minimizing circuit loss transmission losses. The SP4T switch offers 30 dB port-to-port isolation with a switching speed of up to 100 nanoseconds. The input and output connectors of the switch are WR-10 waveguides with standard UG-387/U-M anti-cocking flanges.

Eravant
www.eravant.com

RF Circulators/Isolators

Fairview Microwave Inc.

Fairview Microwave Inc. has extended its selection of high performance circulators/isolators that are ideal for 5G telecommunication, satellite communication, automotive radars, aerospace applications and point-to-point radios. Fairview Microwave’s expanded line of RF circulators/isolators includes 75 models that cover operating frequency ranges up to 42.5 GHz. They provide excellent isolation and low insertion loss and are available with same-day shipping and no minimum order quantity. These circulators/isolators boast a maximum power rating of up to 100 W and are offered in SMA, N-type, 2.4 mm and 2.92 mm connectorized designs.

Fairview Microwave Inc.
www.fairviewmicrowave.com

6 to 18 GHz Bi-Directional Detector

Fujian MIcable Electronic Technology Group Co. Ltd.

Model SA-06-06 is a 37 dB bi-directional detector. It has 1.2 ± 0.2 V (100 W CW) forward detection voltage, 15 percent maximum detection voltage flatness, ± 2.5 percent maximum (-50 ~ +55°C) temperature change rate, 1.4: 1 maximum main line VSWR, 0.5 dB maximum insertion loss, 37 ± 1 dB Max. coupling, 10 dB minimum directivity. The CW power is 200 W average. The size is 50 x 40 x 20 mm.

Fujian MIcable Electronic Technology Group Co. Ltd.
www.micable.cn

30 W Loads

MECA Electronics Inc.

MECA’s low PIM (-161 dBc typical) 30 W loads feature industry leading PIM verified at 1,900 MHz at -155 dBc minimum and are thermally compensated to handle full rated power to 85°C, covering 0.380 to 2.700 GHz.

MECA Electronics Inc.
www.e-meca.com

Limiter Passive

Planar Monolithics Industries Inc.

PMI model: LM-10M62G-20DBM-1W-24FF is a limiter passive that has been designed for minimal insertion loss that operates over the 10 MHz to 62 GHz frequency range. This model can handle an input power of 1 W CW and 4 W pulse peak with 1 µs PW, 1 percent duty cycle, this limiter uses 2.4 mm female connectors.

Planar Monolithics Industries Inc.
www.pmi-rf.com

Pickoff Tee

RLC Electronics Inc.

RLC Electronics has recently launched a DC to 26.5 GHz pickoff tee with 15 dB of pickoff loss. The units provide extremely broadband signal monitoring in a very small package (0.54” x 0.39” x 0.32”). Other/custom pickoff losses are available if desired. Units are offered in standard frequency ranges from DC to 18 GHz, DC to 26 GHz and DC to 40 GHz. RLC offers both catalog options and customized options and can provide form factor drop-in replacement/obsolescence assistance as needed.

RLC Electronics Inc.
www.rlcelectronics.com

CABLES & CONNECTORS

Flexible Coaxial Cable

Mini-Circuits

Mini-Circuits’ model FL47-6VM+ flexible coaxial cable assemblies are available in a variety of lengths for low loss interconnections in commercial, industrial and military systems. The RoHS-compliant cables can form tight bends, with minimum static bend radius of 5 mm and minimum dynamic bend radius of 10 mm. The durable 50 Ω cables are constructed with PTFE dielectric, silver-plated copper-clad steel center conductor and tin-soaked copper braid outer shield. They are supplied with 2.4 mm male coaxial connectors for sure, broadband low loss connections.

Mini-Circuits
www.minicircuits.com

Waveguide-to-Coax Adapters

Pasternack

Pasternack has expanded its line of euro-style flange, waveguide-to-coax adapters that are ideal for satellite communications, radar, wireless communications and test instrumentation applications. These new waveguide-to-coax adapters feature waveguide sizes that range from WR-22 to WR-430, European IEC standard flanges (including UBR square cover, UDR and PDR types), right-angle and end-launch coaxial connector options and N-type, SMA, 2.92 mm and 2.4 mm connector choices. These new waveguide-to-coax adapters transform waveguide transmission lines into 50 ohm coaxial lines.

Pasternack
www.pasternack.com