advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Barry Industries Inc.

Company Profile

Barry Industries logo

Contact Information

Contact: Russell Huot
Title: Corporate Communications
Phone: 508-226-3350
Fax: (508) 226-3317

Location

Barry Industries Inc.
60 Walton Street
Attleboro MA 02703
United States

Barry Industries Inc. is a leading manufacturer of ceramic components including attenuators, resistors, terminations, semiconductor packaging and custom thick film circuits.

Since 1977, leading suppliers of mission-critical communication, military, medical aerospace, fiber-optic and industrial equipment have relied on Barry Industries’ passive components.

We keep large inventories of standard components for rapid delivery. For non-standard devices we offer a start-to-finish component design partnership.

Vertical Integration is the key to our quality and success. Unsurpassed quality standards, precise attention to detail, excellent customer service and in-house control of our manufacturing process are some of the key reasons to choose Barry as your ceramic component supplier.

Barry Industries, Inc. is an ISO9001 certified, ITAR registered company with headquarters and manufacturing operations in Attleboro, Massachusetts. We invite you to visit our facility. We know that you will like what we have to show you.

Products

DC to 60 GHz Chip Termination: TV0404FA-50R0JN-91

March 21, 2016

Barry Ultra Broadband DC-60GHzBarry Industries announces the introduction of an ultra-broadband, DC to 60 GHz chip termination for microwave applications. The TV0404FA-50R0JN-91 is a compact, 0404 (1.016 x 1.016 mm) size chip constructed of robust thick film on alumina with a wire-bondable input pad and epoxy or solderable ground. This 50 ohm impedance device is RoHS/REACH compliant and is rated at 250 mW on a 100°C mounting surface temperature.

Read More

Broadband 5 MM C-QFN

February 04, 2016

QFN_ModelithicsBarry Industries and Modelithics, Inc. have published a report detailing the broadband performance of Barry's 5 mm high temperature co-fired ceramic (HTCC) quad-flat-no-leads (QFN) package to 40 GHz. The model features 64 ports for the inner and outer connections of each pin and two model package options depending on the design configuration.  The Modelithics model is validated with a comparison to actual measured data.

Read More

500 W Flange Mount RF Termination for DC-4.5GHz Applications

January 05, 2016

T50R0-500-15XBarry Industries announces a RoHS-compliant flange mount RF termination, T50R0-500-15X, which dissipates 500 W with return loss over a DC to 4.5 GHz bandwidth. The flange and input tab are constructed of robust silver-plated copper. Overall footprint is 1.25” x 1.00” (31.75 x 25.40 mm).  With its 500 W power rating, stable 50 Ω resistor element and 1.33:1 Max VSWR, the T50R0-500-15X is ideal for crucial applications such as Basestation, Broadcast and Phased-Array Radar.

Read More

News

Barry Industries introduces ultra broadband DC to 60 GHz chip termination

March 24, 2016

Barry Industries introduces an ultra-broadband, DC to 60 GHz chip termination for microwave applications. The uniquely designed TV0404FA-50R0JN-91 has been third-party tested to show a typical return loss of 18.5 dB or better over a DC to 60 GHz bandwidth.

Read More

Barry Industries and Modelithics develop broadband 5mm C-QFN package model to 40 GHz

February 05, 2016

Barry Industries and Modelithics, Inc. have published a report detailing the broadband performance of Barry's 5 mm high temperature co-fired ceramic (HTCC) quad-flat-no-leads (QFN) package to 40 GHz. Barry Industries is an ISO9001:2008 certified ITAR-registered manufacturer of high quality thick film resistors, terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging.

Read More

Barry Industries introduces 500 W RF termination for high power DC to 4.5 GHz applications

January 05, 2016

Barry Industries announces the introduction of a RoHS-compliant flange mount RF termination, T50R0-500-15X, which dissipates 500 W with favorable return loss over a DC to 4.5 GHz bandwidth. Barry Industries is an ISO9001:2008 certified ITAR registered manufacturer of high quality thick film resistors,terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging.

Read More

Flange Mount RF Termination: T50R0-1000-6X

December 01, 2014

Barry 1kW TerminationBarry Industries introduces a RoHS-compliant flange mount RF termination that dissipates 1000 W with favorable return loss over a DC to 4.5 GHz bandwidth. The thick film on beryllium oxide (BeO) T50R0-1000-6X termination, with its internally matched circuit architecture, has 20 dB or better return loss from DC to 2.5 GHz and 17 dB to 4.5 GHz. The flange and input tab are constructed of robust silver plated copper.

Read More

800 W Termination with 1.12:1 VSWR for Basestation, Broadcast and Radar Applications

December 09, 2013

800W Termination with 1.121 VSWRBarry Industries introduces an RoHS compliant flange mount termination which dissipates 800 W with minimal return loss over a DC to 1 GHz bandwidth. The thick film on aluminum nitride (AlN) TA50R0-800-15X termination, with its internally matched circuit architecture, has 25 dB or better return loss from DC to 1 GHz. The four-hole flange and input tab are constructed of robust nickel-plated copper. Overall footprint is 1.9” x 1.04”.

Read More

Hermetically Sealable Air-Cavity HTCC QFN Packages

November 12, 2013

QFN-Packages

Barry Industries, an ISO9001:2008 certified, ITAR registered manufacturer of high quality thick film resistors, terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging introduces its line of hermetically sealable HTCC quad-flat-no-lead (QFN) packages with air cavity for high frequency applications. These QFN packages are available in six sizes from 3 to 8 mm with standard JEDEC MO-220 footprints.

Read More

Compact 3/4W Chip Attenuator for Ku, K & Ka Bands

October 23, 2013

AV0904GA attenuatorBarry Industries, an ISO9001:2008 certified, ITAR registered manufacturer of high quality thick film resistors, terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging, introduces a new 0904 size chip attenuator for Ku, K and Ka Bands. The AV0904GA attenuator has been characterized to 30 GHz, features gold wirebondable I/O terminals with epoxy mount ground pads and is rated to 750 mW. Typical VSWR is 1.20:1 from DC to 18 GHz and 1.50:1 to 30 GHz.

Read More

Barry Introduces New Power Components

April 26, 2010
Barry Industries Inc. is introducing its new flange-mounted line of power resistors and terminations at the May 2010 IMS in Anaheim, CA, at Booth #2421. These terminations and resistors range in power from 400 to 1,500 W and are specifically designed for the industrial equipment market, i.e. amplifiers, MRIs,... Read More

Barry Announces WiMAX Terminations and Resistor Line

June 06, 2007
Barry Industries announces the company's line of power terminations and resistors for WiMAX applications, specifically for 3.4 to 3.6 GHz. Terminations and resistors are available in a selection of configurations, from chip, to a leaded chip, to a flange mounted device, with power ratings from 20 to 200 W... Read More

Barry Now Featured in Modelithics Library

March 29, 2007
Barry Industries announced the company's participation within the Modelithics CLR Library. The Modelithics CLR Library is a substrate – and part value – scalable surface-mount model library that now allows designers to de-embed pad parasitic effects, enabling user-specified pad effects to be applied. Barry featured products are scalable resistors... Read More

Downloads

QFN Package Model

The PKG-BAI-QFN5532-001 is a simulation based equivalent circuit model of Barry Industries P/N QFN-5532-050x molded 5 mm Quad Flat No lead (QFN) surface mount package. Ansys HFSS 3D simulation data was used to create model. Simulation results and model validated against measured data to 40 GHz in multiple measurement environments.

Download

Non-Magnetic Chip Resistor Selection Guide

Barry Industries, Inc. leading manufacturer of SMT and flange mount passive components, has released their Non-Magnetic Chip Resistor Selection Guide. The main source of ferro-magnetic interference from surface mount components is nickel. Barry Industries offers numerous chip resistors and which are 100% non-magnetic. This Selection Guide features all sizes, terminal configurations and power ratings of Barry's non-magnetic chip resistors.

Download

High Frequency Hermetic HTCC QFN Short Form Brochure

Barry Industries, Inc. leading manufacturer of mission critical ceramic components, has released their new QFN short form brochure. Ceramic QFNs from Barry are broadband, hermetically sealable and are available in sizes 3mm to 8mm. Options include castellations and grounded seal ring. Non-standard sizes and pin counts are possible.

Download

Attenuators, Resistors & Terminations Short Form Brochure

Barry Industries, Inc. leading manufacturer of SMT and flange mount passive components, has released their new short form brochure. It features an overview of Barry's attenuators, resistors and terminations with chip components sizes 0202 to 5050 in numerous terminal configurations and power ratings and examples of flange mount components with power ratings to 1500W.

Download

Your request will be e-mailed directly to the company who will follow up with the requested information. This request is for legitimate sales inquires only – please do not submit promotions, solicitations or spam.

Back to Listings

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement